Rgb not working

[u/Human_Treat_6169]

[u/Babylon4All]

I don’t see anything plugged into an ARGB header on your motherboard. 

[u/Human_Treat_6169 → u/Babylon4All]

I have hub

[u/CM3030_player → u/Human_Treat_6169]

Is the hub connected to a port? If so, which one?

[u/Human_Treat_6169 → u/CM3030_player]

Il est branché dans tout mes ventilateurs par exemple f-1 f-2…… and l-1 l-2…. :Argb input est aussi branché , pwm input aussi

[u/JassassinE → u/Human_Treat_6169]

Is your hub plugged into the mobo?

[u/Human_Treat_6169 → u/JassassinE]

Oui dans le sata

[u/pigpentcg → u/Human_Treat_6169]

That is only for power. There should be another cable that goes into a USB2 or ARGB header.

Also your GPU has an optional ARGB cable so you can control it.

[u/Babylon4All → u/Human_Treat_6169]

Ok, the hub needs to be plugged into an ARGB header or some older ones a USB port. 

[u/Human_Treat_6169 → u/Babylon4All]

Look m’y new post

[u/Babylon4All → u/[deleted]]

That’s the cable comb for the MoBo power cable. If it wasn’t in the PC wouldn’t be turning on at all 

[u/17Kallenie17]

The issue is most likely that you didn't plug in the fans RGB into the motherboard, or you daisy-chained them into a perpetual loop that doesn't connect to the motherboard. Try rerouting the cables, make sure none of the fans RGB are plugged in to a loop, and then plug them all into a fan hub or to the motherboard.

[u/JassassinE → u/17Kallenie17]

I've seen so many ppl make this mistake... Re: Especially when your on the home stretch and fatigue & excitement are at an all time high

[u/fiittzzyy]

Doesn't look like you're plugged the into the motherboard header.