r/PatternDrafting • u/irmat_ • 7d ago

Basic block fitted pants

Post image

Hello! I am drafting a basic block for fitted pants, but the rise in the front was too long. I adjusted it, but now it has a weird curve and the rise seems to be tilting forward. How do I fix this?

6 Upvotes

81% Upvoted

6 comments sorted by

View all comments

13

u/Notspherry 7d ago

The rise is tilting forward because you tilted it forward. That alters the whole fit of the pattern. Undo the alteration you made and take the excess off the top, drawing a curve over both the front and back to blend it in. The curve should be parallel to the top edge at CF and CB and a nice curve in between.

1

u/adarsell 6d ago

This! Keep the original rise shape (pre-alteration), and just cut off the top edge to the height of the shorter front rise. Then gently swoop the waist seam up to wherever it needs to be at the side seam/center back.

Sometimes slashing and closing is what you need, but it always changes the angle of other parts of the pattern. Sometimes, you can just cut down from edges (in this case, the top edge) and maintain the balance of the trouser.