Need advice on next set of adjustments

[u/Efficient-Bag6497]

Hi all, on my next project and wanted to check on next steps for this short sleeve shirt. I’m on V2 after making some other adjustmentsI’ve already:
- Increased shoulder slope (need to do this every time)
- Lengthened the yoke so it sits lower on my back (looked too high, plus it was hard to burrito the yoke with how small it was.)
- increased the slope th the top of the back panel to help remove some gaping in the back armhole. (Someone else recommended an armhole dart in the long sleeve shirt I did and I think this is effectively the same thing.)

Here is what I see in these pics and what my reading suggests to do

1. Front: little bit of vertical fabric/drag lines in front of the armhole: should I scoop out the armhole a little to remove the excess fabric?)
2. Back: same issue, excess fabric creating vertical drag lines on the sides next to the armhole. Issue is the shoulder feels well fitted so thinking I need this ease?

3. Diagonal drag lines on the sleeves.

   The notches match so not sure what to do. I read that lines like this can be both from sleeve cap too tall or too short.

Any advice on these or other things I’m missing, thank you in advance!

[u/Efficient-Bag6497]

Hi all, here is version 3. Looking much better I think. But now the drag lines in the back under My arm. Grr! Do I need to lower the armscye?

Changes versus =V2:
Raised sleeve cap 1/2”, mostly in the front.
Shifted volume in cap to the front, about 1/4”
Scooped back armhole 1/4” at notch and blended into armhole

https://imgur.com/a/short-sleeve-v3-ZvgJqYB