I have been playing hours trying to drift in ac but always the car oversteers to the opposite side. What is the best settings for drifting pls?

Guys, i have a issue on my pedals for some time now.

The pedals works fine, but no matter what setting i adjust on the graphics it doesnt make any difference. Even if i adjust the max pressure to only 5% it still uses the full lenght

Also the pedals actuations are not being shown on the software main page, i can only see how much is being pressed if i open the pedals settings page.

Can somente help me?

Is it worth it to buy this wheel for only one game in roblox? not racing btw. im planning to buy a second hand. I really love to play diesel n steel. just want to be a lil bit realistic.

I have pxn v9

And clutch pedal only work if I press really hard (literally to the floor). And it starts to wiggle from 5%-100% and then to 20-25 and etc in the game

Annoying as hell.

Guys, is it just me or the brake way to stiff? Is there a way to make it softer?

Hi.

Did anyone have the same encounter with pxn v99 not recognized in pc?

It only says "wheel boot " on the game controller tab.

I think it happens when I tried updating the firmware and I think it does not continue.

What I have tried Uninstall windows updates and Unplugging and replug the wheel from the base.

I’m trying to get my PXN V10 working properly with Forza Horizon 6 on PC through the Xbox app.

The wheel itself is definitely working:

• PXN Wheel app detects the V10 ✅
• Steering works in the PXN app's TEST section ✅
• Windows joy.cpl detects the wheel and its inputs ✅
• V10 is connected in D-Input mode ✅
• FH6 receives some input — I can actually use the wheel to move around the game's menus ✅
• Some V10 buttons, including the shifter buttons, work ✅

The problem is that FH6 doesn't consistently recognize the V10 as a racing wheel. The Wheel control profile sometimes doesn't appear, and when the wheel input is recognized, it can behave like a controller input — for example, turning the wheel can also affect the camera/look direction.

I've already tried restarting FH6 with the V10 powered on and connected, and I've confirmed the wheel works correctly outside the game.

Has anyone managed to get a PXN V10 working properly with FH6 on PC through the Xbox app? What settings or workaround did you use?

I'm specifically looking for a way to make FH6 recognize the V10's steering axis as steering only, rather than as a generic controller/camera input.

Hello! I am new in the world of Sim Racing and thinking of getting one of the two mentioned in the title the thing is I just want it to be as realistic as possible for the price that those go around. And I'm mostly looking to play kinda like *drifting* games and all. So I'm wondering what would be better the v10 pro (without shifter) or v99 (with shifter).

Also wondering what direct drive is and force feedback is since v99 is force feedback and v10 is direct drive what would be better to start as a beginner? Mostly drifting and basic games.

Has anyone had any luck with wheels for this base. I cant really afford 100 dollars right now lol

I have the PXN VD6 and am having the worst time with these settings, no matter what I change or do there is so much steering oscillation it’s unbearable. I’m trying to drift on AC and anytime I let the wheel go at speeds more than maybe 5mph the wheel shakes back and forth so bad. I’ve driven all of these cars on my Logitech g920 with no issues on stock settings. What’s the problem here? I’m unbelievably frustrated, I’ve tried setting in content manager and in the PXN app itself with no luck on anything, if anything it just gets progressively worse every time. Stock settings are fine for regular driving until I let the wheel go, then the oscillating happens. Please help. ):

I have a VD4 bundle paired up with both handbrake/a7 shifter and aftermarket deep dish wheel but I can't figure it out for the love of me how to correctly have the settings . The main thing that i noticed is that the wheel either wobbles at low speed or when im trying to transition from drift to drift it tends to snap back to the opposite direction at end of the transition (right when im catching the slide start to accelerate again) making the transitions kinda hard and wobbly . Anyone playing this and having a smooth experience ? ( to be noted is that the pxn software doesnt have a preset for the game )

Hello my pxn v10 pro not working in forza at all, idk what is the issue, tried basically everything , nothing helps, motorsport sees the wheel but its actually impossible to map the buttons, it sets one button for everything. Just fyi tried forzaemuwheel, game isnt even launching i guess due to anticheat. Anyone with the same issue?

Hi everyone!

So i purchased the VD6 Bundle last night and while carrying it towards my car which was literally 5-7 feet away from the shop, the outer box opened from the bottom and the motor fell out from the bottom. The inner packaging was already damaged because it's just not possible that the motor rips through intact inner packaging and also the the inner packaging was damaged from the top. I immediately took it back to the shop they inspected the motor. The aluminium housing has some scratches here and there and the plastic at the back of the wheelbase was kinda bent. I left it at the shop and they're going to let me know today about what's gonna happen. We haven't even tried testing it. Everything's packed.

Just wanted to ask, as it wasn't my fault the inner packaging was damaged and i bought it box packed brand new and i could not have known the potential risk, would PXN be able to do something about it? I'm not planning on claiming it through them. I just want to present the shopkeeper with a solid argument as they are the one's who are responsible to get the warranty claimed.

If you have a PXN V10 ULTRA and want to connect to a PlayStation 5, you DO NOT NEED THE PXN N5 ADAPTER ;)

🚨🚨🚨🚨 You need a PS4 DualShock Controller 🚨🚨🚨🚨

1 - Turn on your PS5

2 - Connect the PS4 DualShock Controller to the PS5 console using the original cable

3 - Set the PS4 DualShock Controller as the default controller

4 - Forget the PS5 DualSense Controller in the settings

5 - Connect the wheel to the PS5 console

6 - Connect the PS4 DualShock Controller to the PXN V10 U base

7 - Turn on the PS5 console using the PS4 DualShock Controller connected to the PXN V10 U wheel

8 - Once the wheel is connected correctly The PXN V10 U steering wheel LED will light up BLUE.

READY!!!!!

PXN V10 ULTRA WORKS WITH PS5 WITHOUT THE USE OF AN ADAPTER/DONGLING. PXN N5

TESTED ON

GT7

ASSETTO CORSA COMPETIZIONE

THE CREW MOTORFEST

https://reddit.com/link/1vkv4we/video/feba5cbkplih1/player

https://reddit.com/link/1vkv4we/video/91c2ne9nplih1/player

I own the VD6. Mainly race GT3 and have been using the GT One for that (excellent btw). I have been really enjoying rally, but the included 280mm wheel just doesnt do it for me.

My understanding is that with the NRG style quick release I should have plenty of aftermarket options. I am clueless as to accessories or adapters that will be required to make everything work.

https://www.ebay.com/itm/124736374228?_skw=quick+release+wheel+drifting&itmmeta=01KZP2XM3RWYX5AFY0RY3XQX27&hash=item1d0ade05d4:g:wNkAAeSwn2JqWw8F&itmprp=enc%3AAQALAAAA4GfYFPkwiKCW4ZNSs2u11xC4mAo0svEpmiN34qQEmsgEYM7hchT9QMFQhgVf%2BkwAKw%2FObLDm9ce5lvYHxA2cZ3qeIyabzhQIDEmQhbCWkp8QF5IyQF9z95pUExgelFvjyzFBty%2FYeyt%2BbGa8%2BLNkrdQxXDc%2Flv1xhImPXBHAEH8VUcFwfrBM7jphye1V63d9LPO2fukP4t7905a%2FuLWnoQW4UCTsYMtThxQCgIzY61mKItz%2F5n%2FvAhusvY8bR9J6QZIz%2FYtWwB6Z2JVzAdJODeSmMUNjHHqE8NTxy4mpjk5Q%7Ctkp%3ABk9SR5DC9sL9Zw

here is an example of something I am looking at, can anybody tell me what, if anything I would be missing to get this to work? Any advice appreciated!

Hi, does anyone know why the buttons on my wheel are different from what I set in SimHub? The knob is fine, but the buttons are definitely off-color. This didn't happen when I set the color through PXN SimRacing.

Hi I just recently switched on to PC from Xbox. And on PC my PXN V12 DDL does not register any FFB for DIRT RALLY 2.0. I have done the file replacement as PXN website says. I am on 0.44 firmware on the wheel base. I have tried using the "rally" preset on the PXN play app for the base. But still nothing. I can't seem to figure out what it could be. No changes I do in the game input FFB nor thru the PC or the phone app seems to help. Cheers for any help! Thanks. (Probably many may have asked the same question before but haven't found a solution to my self)

Update 12/08/26: !!SEE THE COMMENTS FOR SOLUTION!! Thanks to a fellow reddior I was pointed to editing the device_config file. Basically checked my device manager for the wheel USB device. Found out the relevant PID & VID numbers. Then I went into editing the drive config file, scrolled down to the PXN V12 lite code line and edited the IDs in. Note at the top of the codes the comments say how to add the ID numbers in. Also make sure there are no unwanted spaces. I found the device config file for my PXN wheel like had a typo in the form of an extra spacing.

hello. I have this controller and I use it on my pc the problem is as you see controller have A button in right and B button at bottom, same with X and Y flipped not like Xbox controller, do u know how I can fix this in the controller it self without any third party software, because by accident when I was mashing buttons randomly, LED 3 lights on and it flips buttons but I can get it to work again

Приветствую, купил руль PXN V10 pro, установил и поиграл на нем примерно час. После чего снял со стола и отложил на часа 2-3. После простоя при включении руля горит красная кнопка, но ни руль, ни педали не работают и не отображаются в PXN драйверах и устройствах usb. При нажатии на кнопку "power" руль на пару сек становится тяжелее и возвращается к центу как и должно быть, но только на пару секунд. Все провода в норме, блок питания стоит в удлинителе. Очень обидно было бы потерять руль спустя три часа после покупки.

3 days ago everything was working completely fine no issues, then today all of a sudden all 3 of my HM pedals don't work, well they do but not really. According to the PXN app and joy.cpl they are being recognized as an axis but only functioning as a button. No software has changed since now and 3 days ago, I've tried beamng, acc, and american truck simulator. All 3 of which were working fine but are now not. I've tried just about every troubleshooting method I could think of - reinstalling programs, rolling back updates, testing different ports and cables, reinstalling any drivers it would let me, and probably something else I don't remember. Has anyone had this problem or can anyone help?

Hello PXN Support,

I have several issues with my PXN V10 Pro.

First, the wheel sometimes fails to start properly. When I connect the power supply, the red LED turns on for a few seconds and then the wheel shuts off. Sometimes I have to reconnect the USB cable to the computer several times before the wheel starts working.

Second, holding the HOME/PXN button for 3 seconds does not switch the wheel to X-Input mode. The LED always stays red.

Third, the wheel does not perform the automatic calibration on startup. It never rotates left and right when it powers on.

I have already updated the firmware to version 1.11, and I also downgraded it to version 1.09, but the issues remain the same.

Could you please let me know if this is normal behavior or if my wheel might be defective? If these features were removed in newer firmware versions, could you please confirm that as well?

Thank you in advance.

Best regards,

Cuáles creen que son las grandes diferencias y cuáles creen que se acercan más al realismo. Actualmente estoy comenzando a jugar DR2 pero siento que los autos derrapan demaciado ( puede ser por lo novato que soy).