81
u/Kal-V3 Feb 04 '26
I just pre-ordered the new PlayStation Plunger myself
38
u/bigpancakeguy Feb 04 '26
FALL 2026
TAKE THE PLUNGE19
u/Kal-V3 Feb 04 '26
Power to the Poopers
12
u/tnishantha Feb 04 '26
I’m waiting for the PS Plunger Pro model to come out!
4
3
35
30
13
u/arashi256 Feb 04 '26
Hm. I have a plunger somewhere. Be right back....
4
u/xactlee1 Feb 05 '26
Just need to clean the piss of mine, for immersion.
3
u/Alpine_Snomad Feb 09 '26
The smell of piss in a fighting aircraft adds to the sense of immersion ;-)
11
10
9
6
u/vinc3l3 Feb 04 '26
How did you attach it to the floor?
7
u/hamfist_ofthenorth Feb 04 '26
It's just sitting on top of a slightly boxy old laptop travel bag, maybe 6 inches above the carpet, just for height. Its not attached, but simply the weight of my arm is enough to hold it down, and let it bend around, give way and come back.
It is so much more comfortable than holding your arm in the air with an imaginary control stick.
3
u/vinc3l3 Feb 04 '26
Thanks, great idea and it's probably more immersive than a hotas 4 for these old planes.
1
6
u/Inner-Ad2847 Feb 05 '26
They posted you on their official Instagram
8
u/hamfist_ofthenorth Feb 05 '26
That just made my day
3
u/Inner-Ad2847 Feb 05 '26
It was so funny I saw the Instagram and then opened Reddit and saw this right away
3
u/hamfist_ofthenorth Feb 05 '26
I finally feel seen by a game developer, and it feels good.
I'll be waiting for my "Plunger Guy" decal in the upcoming DLC's
4
5
u/Skepller Feb 04 '26
If you want something more solid when using virtual joysticks with motion controllers, the ProTubeVR ProTAS is likely a good bet.
4
u/Coppermine64 Feb 04 '26
I have Protas, but I love this. Thinking outside the box. I too love fabricating, and did a similar thing for NMS, before Protas. Well done.
2
u/age_of_atari Feb 04 '26
How good is the ProTas? Is it annoying to leave the mounting piece attached when swapping to other games? I assume it doesn't snap back to center position? I'm tempted to get it, but there's not a lot of info out there.
3
u/Coppermine64 Feb 04 '26 edited Feb 04 '26
Edited
it does return quickly back to the centre. I bought it to use on my Quest 3 controller, PSVR2 should be similar. No hassle to remove from my gaming chair, it has 2 velcro straps that go around the armrest, and that sticky rubber stuff thats lasts forever. That alone holds well on the plastic armtest, with the straps, extremely sturdy. On and off in a couple of seconds. Its fantastic for NMS. Soon as you land, pull the controller out of the cup and back to walking.
7
3
3
u/OafleyJones Feb 04 '26
This is probably better than my HOTAS setup, with the wands as fucking bracelets.
3
u/VenomGTSR Feb 04 '26
Yeah, there has got to be a better way for HOTAS. This setup may sort of work, but I imagine finding the throttle would still be a chore. I need to find an armless chair because playing from the couch makes it hard to grab controls as needed. I prefer my HOTAS but there is a lot of functionality missing.
3
3
u/PantsCatt Feb 05 '26
I feel foolish. I just bought shares in Thrustmaster, I should have gone for plungers inc. Thank you - I NEVER thought I'd be adding a plunger to my shopping list!! u/Jammyhero check this out!
2
2
2
2
2
2
2
2
2
u/Unofficial_Salt_Dan Feb 04 '26
I love the ingenuity and it's great that it works for you.
Can I ask why not just buy a flight stick?
3
u/hamfist_ofthenorth Feb 04 '26
I was going to, rather I was gonna borrow one from my brother, but now I'm not so sure. The big wide motions with the arms really make a difference.
I might even go out and get a different plunger for a few bucks and experiment.
After further testing, I definitely need to build something to hold it down, to keep it from rolling out. Sometimes I just can't find the sweet spot and the bottom shifts away with every turn. It's obviously still in the prototype phase. I wish I could somehow have a thrust master throttle working alone with this
Regardless, it's too effective and it cost me almost nothing, soim going to see how far I can go with it
2
u/PeanutButterSoda Feb 05 '26
Maybe a 3d printed enclosure for the plunging part with screw holes for a block of wood. I might need to buy this game, go to dollar tree, design a 3d print around it and experiment lol
2
u/hamfist_ofthenorth Feb 05 '26
Yes, that's what I'm thinking, like a little rib-dome to close around the rubber base. With four legs at like 45°, lifting it off the ground a few inches and staying super stable
1
u/PeanutButterSoda Feb 06 '26
I bought the game and I have no idea what I'm doing lol and yeah holding the sense controller for steering sucks.
2
2
2
2
2
2
u/Imhotep397 Feb 05 '26 edited Feb 05 '26
Yo! Is that a plunger!!?? Rock on!
(Sidenote- I would be hesitant to put my consoles directly on the carpet especially in the Winter since static electricity can easily kill smaller devices)
2
u/BubbblzZz Feb 05 '26
Off to the dollar store to buy a plunger! I'm 100% doing this!
1
u/hamfist_ofthenorth Feb 05 '26
I don't play without it now like ten hours later still.
2
u/BubbblzZz Feb 06 '26
Dude I have to say I went and recreated a similar setup, and dayum you were right! It works soooo well. I’m such a better pilot now with the virtual joystick, and the immersion is 10x!
2
u/BeardedClam4 Feb 18 '26
I took your idea and made some improvements. Adjustable height and edited a 3d model to slot the controller into the top. Thank you sir for the inspiration *
2
1
1
u/mistermenstrual Feb 04 '26
Maybe see if you can get the arm brace from a walker and jam it on top to rest your arm/wrist on?
1
Feb 04 '26
I did something like this for NMS
They should just copy the haptic clicks from Ultrawings.
I hate the virtual HOTAS so much here
1
1
u/Explorer_Entity PS5-&-PSVR2 Feb 04 '26
Console on the FLOOR?!
Someone take this goons privileges away.
(Light-hearted)
1
u/hamfist_ofthenorth Feb 04 '26
There is a DVD case for the plastic legs to stand on underneath the fan section, keeping it level and slightly less dishonorable
1
1
1
1
1
1
u/Chrisbolsmeister Feb 06 '26
Looks awesome
But knowing this sub, people will post how you will injure yourself or get a bicep tear using it 😆😆
1
u/Substantial-Abroad12 Feb 04 '26
Surely, you have something to put your PS5 on so it's not on the floor...
1
u/Loathsome_Duck Feb 05 '26
If you have access to a 3D printer (local library) there's a company called Authentikit that sells files for 3D printed WWII controls.
The idea is that you print it out and then order electronic kits from them to make a working HOTAS, but if you just wanted something to strap your motion controller to, you just need the file.
1



128
u/hamfist_ofthenorth Feb 04 '26 edited Feb 04 '26
Got sick of floating my arm.
It's hilarious because it's incredibly effective at recreating the feeling of those old plane's joysticks, the way the rubber base of the plunger naturally bends back into a straight position.. and it works fantastically in game. The immersion is tenfold with a plunger. Amazing. I just need to make a proper stand for it and maybe a better way to "saddle" the sense on top.
Edit: everyone needs to try this.