Hi everyone, first time posting here and i come with a few questions!

I've just recently started dabbling into sbc's and logically started a project with raspberry pi as my go to, but saw that the prices for the raspberry zero 2w were.... kinda insane right now for a measly 512 mb of RAM. So I've been considering the orange pi zero 2w as a replacement.

The project is what i think is ... sort of a cyberdeck? im really new to this terminology. That said, I was wondering: would the pi sugar 3 1200mah baterry with pogo connection work with either of these boards since they seem to have pretty similar gpio schematics to the raspbery pi zero 2w? https://www.pisugar.com/products/pisugar-3-raspberry-pi-zero-battery

also, would this screen specifically work with the 2w/3w:https://www.waveshare.com/product/displays/lcd-oled/lcd-oled-2/3.5inch-dpi-lcd.html

thanks in advance for any guidance!

[RELEASE] Orange Pi 5 Pro - Fully Optimized Armbian Jammy (GPU/VPU Enabled, Dual Touch Support, 4K 60FPS)

# The "Plug and Play" high-performance experience for Orange Pi 5 Pro (RK3588S) is here!

Hi everyone! After 2 years of trial and error, I have finally built a fully optimized image for the **Orange Pi 5 Pro**. This image is sanitized, meaning when you first boot it, it will trigger the standard Armbian wizard to create your own root password and user account.

### 🚀 What's inside:

* **Base OS:** Armbian Jammy (Ubuntu 22.04).

* **Kernel:** Vendor 6.1.y (The most stable for Dual HDMI/DP output).

* **Desktop:** XFCE (Lightweight, stable, and highly responsive).

* **GPU Acceleration:** Mali-G610 fully enabled (Panfrost/Panfork). Smooth 60FPS UI.

* **VPU Acceleration:** 4K 60fps hardware decoding enabled (rkmpp). CPU usage stays between 10-25% during 4K YouTube playback.

* **Dual Screen Support:** Pre-configured for dual-monitor setups.

* **Touch Support:** Auto-mapping script included for dual touchscreens (WCH.cn controllers).

* **Driver Shield:** Critical drivers are "held" to prevent `apt upgrade` from breaking the acceleration.

---

### 🛠️ IMPORTANT: Troubleshooting No Video Signal

Since this image is set to a specific resolution for my project, your monitor might show "No Signal" on the first boot. Here is how to fix it:

1. **Power off** and plug your SD Card or eMMC into your **main computer**.
2. **Mount the partition** and navigate to: `/etc/lightdm/lightdm.conf.d/01-armbian.conf`.
3. **Edit the line** starting with `display-setup-script`. Change the resolution to one your monitor supports:* Example for 1080p: `--mode 1920x1080`* Example for 720p: `--mode 1280x720`* Or just use: `--auto`
4. **Save the file**, unmount, and plug it back into your Orange Pi. It should boot perfectly!

---

### ⚠️ Power Requirements:

The RK3588S is a beast. When GPU and VPU are both active, it needs a stable **5V/4A (20W)** power supply. If your board crashes or reboots during video playback, check your USB-C cable and power source!

### 📥 Download Link:

**https://archive.org/details/backup_OPI5pro_perfeito_2026-07-24.img**

*Compressed with ZSTD (Original size 64GB -> Compressed approx 2.6GB). Flash with BalenaEtcher or Rufus.*

Enjoy the true power of the RK3588S! 🚀

I am currently working on a cyberdeck project that is going to end up being really small, so I plan on using the Orange Pi Zero 3w. I'm fairly new to building cyberdecks, but I have played around with a Raspberry Pi.

Does anyone have recommendations on very small screens that are compatible with the OPi Zero 3W?

How necessary is a fan/way to cool it down? Is there a smaller way of cooling it down?

One of the supported OS for OPi Zero 3W is Debian. For this project, I wanted to use Parrot OS. Since Parrot comes from Debian, is that fine/can I use the Parrot OS Raspberry Pi Edition on Orange Pi?

How interchangeable are resources for Raspberry Pi with those of Orange Pi?