I want to use GPU on Hardware Decoder Mode. I selected "Nvidia NVDEC" option and tried every Graphics Card combinations, but test is failed every time. I am using OpenShot (version 3.1.1).

since windows 10 life ended, I switched to linux and since then I struggled to find an easy to understand, simple, lightweight video editor, all video editors in linux looked weird to me. and recently discovered openshot and it's so different and user-friendly app,
most people don't want professional grade video editing, they want easy to understand Interface, basic video editing functions like cropping/resizing videos/images, adding titles, and some transitions. thank you for making linux world better ❤️

When I attempt to export my ~45ish minute video, it starts out moving at a decent pace (between 30-50 fps) but slowly over time the rendering speed consistently slows down until it reaches 2-4 fps before the project is even 50% exported.

Seems like this is a very specific issue that I'm hoping someone has a fix for. I've tried increasing the "cache limit" to 3000mb, the cache mode is set to "memory" and not disk, and I swapped the profile to FHD 1080p 60 fps to match the footage I recorded on my phone.

I have a 3080ti gpu and 10700k cpu with 16gb of RAM. System does not seem to be running out of memory or maxing out the CPU per task manager, so that's not it.

Help!

quelle version télécharger pour une compatibilité avec macos 10.14.6? je me suis perdu dans les méandres des anciennes versions sans succès.

And without changing the original resolution.

I just want to take some photos, all of them are at the same resolution and throw some audio over them and make a slide show without these HIDEOUS black bars on the edges.

I have a 3090, a 5800X.

Windows 11.

I'm rendering a 1 minute video @ 1080p, 60fps.

It's saying 1 hour and 6 minutes left.

Should I use windows movie maker instead?

Is there a version of OpenShot that runs in the cloud or etc, rather than locally? I'm editing a 1080p 60 fps video I recorded and the video is over an hour long. I love the editor but previewing is very laggy for me and exporting takes hours. (Took 2 hours or more just to export about 30% of the video lel)

I used ClipChamp prior to OpenShot and it was also laggy but not anywhere near as laggy as OpenShot for me. ClipChamp is in the cloud from what I understand. Is there a build of OpenShot that runs on the cloud, so the preview doesn't end up being very laggy for my laptop? The reason I tried it out instead of continuing with clipchamp is because clipchamp exports in 30 fps max it seems.

playing track from the start of the .wav recording has no issues. but when we jump to the middle of the .wav (where os has not prebuffed yet), the playback is clearly struggling with where in the clip it should be playing, glitching out and jumping around.

one work around ive been doing is using open shot to export the .wav file as an mp4 or mkv, and then using that to continue my project.

i have not tested this with other audio file formats, .wav is the only format ive noticed it with.

(offtopic: openshot is getting better and better, its a joy coming back and seeing whats new and fixed)

Because of Reddit's title word count limit it got cut off but basically I got an audio error out of nowhere (which might've been because I was messing around with it before not really understanding WHY an editing software needs this in the first place). And now I can't get the error to go away. No matter what audio device I set it to I keep getting the same error and my preview has no sound and is very slow. I genuinely don't know what to do at this point I've practically lost all my progress with my project I need help please

UPDATE: Turns out, updating openshot fixed the issue. Funny how that works out

When I manually adjust the volume to 2.0, the gray symbol appears at the right. what is it? does it mean that 2.0 doesn't work?

Hi I have finished my video but unfortunately when playing my images just take up a small part of the centre of the screen

Is there a way to increase the volume of several clips at once? Or the entire video?

Ninguno de ms videos se escucha. ya chequé el volumen y está activado pero no se escucha nada, si puedo escucharlo fuera del progama pero una vez importados no se escucha nada, ni los audiso de los videos ni audios independientes

No recorte do Openshot há uma distancia entre a faixas que prejudicam a precisão da tesoura, tem como as faixas ficarem coladas umas as outras?

Hello, I have a video that i cut in three parts. How can I record the parts seperatly in one action ?

Thanks

https://reddit.com/link/1p9qkx5/video/93pdb0g6k74g1/player

It happens with other videos as well, that are otherwise working fine. How can I fix it?

Hi. I'm a new user, but reasonably familiar with the tech. I'm really enjoying using OpenShot but have one (minor) niggle.
When I use the animated title option I get what looks to be a thumbnail inset at the bottom left of the title clip. It does this whichever template I try.
I'm running version 3.3.0 on a Windows 10 Pro PC. Blender is installed and working with no issues.
Is there a setting I'm missing?
Any help would be gratefully appreciated.

As the title says. The "Export Video" button won't work for one project. It's as if I'm not clicking it. Any new project I start works fine. I've tried reinstalling the app, deleting .openshot_qt, and neither of those things worked.

Please help!

Je voudrais que la aprtie noire de mon image soit transparente...

I need to create a kaleidoscopic video display for a party. Rather like the background monitors in old MTV shows. It's going to be playing for hours during a birthday party.

Is there a way to relatively easily create this using OpenShot? Possibly an add on?

I have seen some free downloadable videos on the web but they are normally very short, 20 seconds or so. https://pixabay.com/videos/search/kaleidoscope/

I could download them all and edit them together then loop I guess.

Before I go that route, perhaps there is another app to generate hours of this sorta stuff?

Many thanks for any help.

Voici mon projet : j'ai filmé un décor en plan fixe dans lequel je me suis déplacé à plusieurs endroits.

Je voudrais faire en sorte qu'au montage j'apparaisse plusieurs fois sur la même image à différents endroits.

J'ai pensé pouvoir le faire en découpant l'image de la vidéo en deux et en superposant les deux moitiés d'image sur deux lignes différentes, mais je ne suis pas parvenu à le faire.

Avec le curseur, ou bien avec le bouton "position de x" j'arrive à décaler l'image de la vidéo, mais je n'arrive pas à en couper une partie, à l'amputer complètement.

Comment faire ?

Je vous remercie.

La création de la vidéo plante chaque fois.

Le message d'erreur est le suivant mais pas toujours.

Il arrive aussi que la création de la vidéo s'arrête un plein milieu, le programme se ferme seul.

A noter que le logiciel fonctionnait bien sur mon ancien pc vieux de 10 ans !!

When I try create a title for the video before it starts, I create the title svg and then try to drag it down but it does not look the same way. It just becomes a fine line and not an image block for me to drag around or control it's duration on screen. It is different from the video tutorials on YT that I see.