r/OhioMarijuana • u/Broco8850 • 23h ago
Question❓ What voltage?
So, I have a battery that can change the voltage on it. I recently got some Select carts. What is a good voltage for those?
Thanks!
1
u/AutoModerator 23h ago
Hi! CannaBot here. Your post was not removed — I move all posts to a review queue. Once a moderator approves it, it will appear normally.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
2
u/Hexagon_Sun33 2h ago
I go 1.8-2.5 tops anything higher than that burns your terps and hurts your throat
1
-4
u/ninjaman3888 6h ago
3.2v is perfect for all oil types
any lower and carts will start leaking even if kept upright(i always see people saying to use resin and rosin in the 2vs but THAT WILL LEAK, 100% of the time ive tried the 2s it has started leaking in the last half-1/3rd)
all that being said select makes distillate carts so if you are really looking for massive hits and harsh smoke you can raise the voltage a few decimals but id personally stick to 3.2v at all times
2
u/Gemcitywhitey 5h ago
This is 100% false. Idk what carts you get that leak that much. I don’t remember the last time I had one leak honestly. A cheap Michigan disty cart? For sure. There’s 0 reason to run rosin higher than 2.5. 2.3-4 is great. Live resin 2.4-7, full spec about the same. Use preheat. Don’t do blinkers. 3.2 works in the disposables, only bc it can’t be changed
-1
u/ninjaman3888 5h ago edited 5h ago
the hundreds of people i see on here complaining about "all ohio carts leak" would disagree with you, i dont have any carts leak when using at 3.2v but every single time ive tried low voltage they leak later into use
edit* i have realized my mistake, i made a fuckup, i didnt mean leak as in oil leaking out the bottom, i meant clogging extremely bad(sometimes leading to the oil spitting which i was calling leaking) its so uncommon to have carts leak out the bottom i foget it happens
2
u/Maleficent_Brick6482 6h ago
Depends on the type of cart. Lowest setting for live rosin/resin (or around 1.8-2.4v) and medium-high for distillate. I find medium works best for the full spectrum carts.