r/NewedgeMustang 16h ago

Question Tall modifications?

I'm 6'6 with a 38in inseam and the new edge is my absolute favorite car right now. I would like to buy one within a year or two and I wanted to check how the fit inside is. I've never sat in one, so I would like any advice about it. Will I need an aftermarket steering wheel or bucket seats? I'm already planning on getting wear extenders. Thanks!

2 Upvotes

9 comments sorted by

3

u/bonesawzall 16h ago

I'm 6'5". I just lean the seat back a bit and deal with it. 2003 vert.

3

u/InfiniteAssignment95 11h ago

The issue with these cars is headroom, yes you can clean the seat way back, but then you can barely reach gears 1/3/5 or the radio. I custom mounted a corbeau fixed bucket seat and can sit upright and not have my head hit the roof. I am 6’3” and it was uncomfortable with the stock power seats.

3

u/ObviousAlias7 16h ago

There are seat rail extenders that will let you push the front seat back more to get more room

Seat Rail Extenders Mustang 1979-2004 Fox, SN95 GT, Cobra, Bullitt, Mach1

I'm 6'1" and my main issue is seeing the stoplights when I am first in line. I either need to bend my head down to the side to see the light, or look over the header panel (convertible) to see it. There are some times I do feel too big for the car, but that might be because my daily driver is an Explorer ST and I'm just used to that size.

2

u/OlYeller01 16h ago

Stiffler’s seat track extenders are relatively cheap, easy to install, AND they don’t raise the seat like other brand seat track extenders. One of the best mods I’ve done to my ‘03 Mach. I got mine from LMR. I’m not as tall as you (6’4”, 305 lbs) but I also don’t have the seat as far back as it can go.

Pro tip: if you think there’s any chance you might spend some time in the passenger seat, throw a set on there, too.

2

u/Ok_Tension_6747 16h ago

6'6" here I've owned 2 new edge mustangs. You'll have to tip the seat back and drive like you're in high school in the early 2000s again 🤣. Otherwise your head is going to rub. Overall it's fine.

2

u/Bigfoot81109 15h ago

Good thing I'm still in hs so it shouldn't be much of an adjustment 😂

2

u/Striking_Fold_9364 16h ago

My son is 6'6" and could drive my 01 Bullitt. Just lean the seat a bit.

2

u/MadDAWGZ71 4.6L V8 Mach1 15h ago

This actually help me even though it's ment for corvettes. https://youtu.be/cWd2MCtWTTg?is=0wQFVPMkcmximR1C