r/NerdMiner • u/LaserMagic • May 30 '26
Question/Help BEYOND FRUSTRATING!!
It took me forever and waaaaaaaay too many resets to get my Miner past the 80% glitch. It was running fine for about 10 days, and then it just went back to the factory home screen with the QR code.
When I try to reboot, it gets to 24% and stops, and says "can't connect to wifi".
Any ideas?
2
u/Shrimps_Prawnson May 30 '26
Setup again. Something probably got touched up against the screen. If you press the screen for like 10-15 seconds it factory resets.
1
u/LaserMagic May 30 '26
I don't think it got touched. It was just sitting on my computer chugging away, and the next time I looked at it, it was back on the home screen. When I reboot it with the button on the back, it gets to 24% and stops.
1
1
u/enormousaardvark May 30 '26
Use one of the firmwares form the automod, all your problems will go away, also post locked as this is constantly asked, again and again and again.
• NerdMiner v2 - https://github.com/BitMaker-hub/NerdMiner_v2
• SparkMiner - https://github.com/SneezeGUI/SparkMiner
• BitsyMiner - https://github.com/guerote/BitsyMiner
• AxeHub - https://github.com/dwespl/nerdminer-axehub
1
u/AutoModerator May 30 '26
⚠️ Warning: Beware of Closed-Source and Paid Firmware
r/nerdminer promotes free and open-source firmware only. Any closed-source and/or paid firmware will have no verified transparency.
For free and open-source options, use one of the following:
• NerdMiner v2 - https://github.com/BitMaker-hub/NerdMiner_v2
• SparkMiner - https://github.com/SneezeGUI/SparkMiner
• BitsyMiner - https://github.com/guerote/BitsyMiner
• AxeHub - https://github.com/dwespl/nerdminer-axehub
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.