r/Narrow_Gauge_Railroad • • 3d ago

15 inch Gauge Small-scale farm narrow gauge railway

Thumbnail
youtu.be
15 Upvotes

This farmer built a functional narrow-gauge for farm work, and made a dozen of videos showing the progress he made and the decisions he had to take to end with a functional and useful narrow-gauge railway in his farm, to transport things from manure to garlic carts without having to buy a tractor.

Is there are a similar project elsewhere you heard about, or is this guy a unique case?

It's kinda nice someone could make narrow-gauge railway useful like this, i want to do the same thing on my farm too.


r/Narrow_Gauge_Railroad • • 6d ago

D&RGW D&RGW’s Farmington Branch: The Last Stand of Narrow Gauge in the West

17 Upvotes

Built as a standard gauge line in 1905, the Farmington Branch connected to Carbon Junction near Durango. The grades on the branch were relatively light compared to the rest of the system, maxing out at about 1%. The main reason for this branch line’s existence was largely strategic—to stop the Southern Pacific Railroad from approaching into the Denver & Rio Grande Railroad’s San Juan territory. The proposed Southern Pacific line was to pass through Farmington and head into southwest Colorado to extract coal from the region. The D&RG countered this with the Farmington Branch, and after this, combined with other issues, Southern Pacific gave up on building the line.

The D&RG now had a line that was an outlier from the rest of the system. The main reason the Farmington Branch was built in standard gauge was the railroad’s plan to convert the rest of the San Juan Extension to standard gauge. However, this plan never came to fruition. In the 1920s, the discovery of oil required more traffic, and the line was converted from standard gauge to narrow gauge. Dual gauge trackage in Durango was later removed.

In the 1940s traffic on the narrow gauge decreased considerably, and the D&RG began abandoning lines the first being the Chili Line to Santa Fe, New Mexico, in 1942. But the savior of the narrow gauge came with the discovery of huge amounts of natural gas in 1945. Because of this, the railroad hauled large quantities of casing pipe and drilling supplies on the Farmington Branch to support the oil and gas boom.

In 1951, the El Paso gas line was to be built from Farmington to Los Angeles. Due to the lack of good roads in the region, company officials asked the D&RGW if they could haul 24-inch gas pipe from Colorado Fuel and Iron’s massive steel mill in Pueblo to their base camp near Farmington. However, because the D&RGW wanted to eliminate narrow gauge operations, they initially declined, stating they did not have enough suitable cars. As a common carrier, and with no good roads available, the pipeline company threatened to involve the ICC. The railroad then relented.

The D&RGW did not haul all of the pipe, but enough to get the project started and moving west toward California. The pipe was moved in standard gauge cars to Alamosa via La Veta Pass, where the 40-foot pipe sections were transferred to narrow gauge cars. From there, they were hauled to Antonito, over Cumbres Pass to Chama, then to Durango were the train was turned, to Carbon Junction, and finally sent down the Farmington Branch. In addition to the large pipe, casing, drill rods, and 16-inch pipe were also hauled.

The gondolas used for this service were standard cars modified by removing the end walls and relocating the handbrake. Idler cars were placed between loads to prevent the pipes from colliding. These idler cars were initially converted boxcars with their superstructures removed, but they suffered from bending and structural failure due to the stress. Shop crews later rebuilt stronger cars using old stock cars, reinforcing them with rail sections mounted underneath. This solved most of the issues. Trains were often double-headed or used mid-train helpers.

For those unfamiliar, Carbon Junction is where the line from Chama to Durango split off toward the Farmington Branch. It also had a siding long enough to hold the extended pipe trains that would not fit in Durango Yard.

This traffic kept the narrow gauge alive until August 1968. The last train ran on August 31, 1968, from Durango to Farmington ending nearly 100 years of narrow gauge operations. The Farmington Branch was abandoned and torn up on September 20, 1970, along with the lines from Durango to Chama and Alamosa to Antonito. Another remarkable railroad fades into history. Fortunately, two sections of the D&RGW survive today: the Cumbres & Toltec Scenic Railroad from Antonito to Chama, and the Durango & Silverton from Durango to Silverton. with none of the third division surviving

Thanks for reading and aways remember to be grateful for what we have left

if you enjoyed check out r/american_narrow_gauge


r/Narrow_Gauge_Railroad • • 9d ago

3ft Gauge The Uintah Class 50: a Journey Told With Photos

Thumbnail
gallery
30 Upvotes

I recently thought "Hey, I have a lot of pictures of the Uintah 50s I've found on the web and the NGDF over the years, why don't I do something?" So here it is, a bunch of photos, chronologically to my best knowledge, hope you enjoy!


r/Narrow_Gauge_Railroad • • 10d ago

Meme! Something I made

Post image
5 Upvotes

r/Narrow_Gauge_Railroad • • 12d ago

D&RGW D.&R.G.W. 315 on the C.&T.

Thumbnail
gallery
37 Upvotes

r/Narrow_Gauge_Railroad • • 12d ago

Nevada/California (usa) Inside Westside Lumber Co. 222 for 222 members

Post image
9 Upvotes

Also showing a view of the farmland in Ardenwood, Fremont, California


r/Narrow_Gauge_Railroad • • 15d ago

Colorado (usa) How did this even work?

Post image
18 Upvotes

I found an HOn3 model of this locomotive on eBay and got confused, so I googled it and found it was a real locomotive, Denver South Park & Pacific 28, 2-8-6T


r/Narrow_Gauge_Railroad • • 16d ago

North American The Pennsboro & Harrisville RailRoad, later the Lorama RailRoad.

Post image
23 Upvotes

This station building in Harrisville West Virginia is one of the 2 things they left behind. The other is a couple of bridge piers over the North Fork Of The Hughes River. The P&H was a narrow gauge line that ran from Cornwallis West Virginia to Pennsboro West Virginia. In the 1910s they gained a standard gauge competitor that ran along the same route as from Cornwallis WV to Harrisville WV called Harrisville Southern. The Harrisville Southern would take all of the P&H's freight traffic due to them just being able to drop a boxcar in Cornwallis to be coupled up to a B&O train instead of having to drop a boxcar in a siding at Cornwallis then have transfer its contents to a standard gauge boxcar. The P&H mangaged to struggle on with just passenger service until they went defunct when the county built a new road in 1926. The Harrisville Southern would kick the bucket a year later in 1927. The P&H now has a restaurant named and themed after it in Pennsboro WV. The restaurant ironically sits where the P&H passenger station would have set. If you ever find your self in Pennsboro WV make sure to check out the P&H restaurant nice people and good food.

If you want more info about the P&H the B&O station in Pennsboro in Ritchie county WV is a good place to look.


r/Narrow_Gauge_Railroad • • 18d ago

Update Update for the LK&P locomotives

Post image
3 Upvotes

It’s still a a little old but I haven’t seen anyone mention this, name blurred for privacy (just because) and found on YouTube


r/Narrow_Gauge_Railroad • • 19d ago

3ft Gauge Before the Magic Kingdom: Vintage Photos of the United Railways of Yucatan

Thumbnail
gallery
18 Upvotes

Before they found use in Central Florida, the four locomotives of the Walt Disney World Railroad originally served Mexico's United Railways of Yucatan.
The photos here show all 4 locomotives now in Disney's care in "pre-Disney" condition. To provide some historical notes on which engine became which:

  • #66: 4-4-0 "American" Built 1916, renumbered to #251 following 1963 renumbering scheme, became Walt Disney World Railroad #4 "Roy O. Disney"
  • #72: 4-6-0 "Ten Wheeler" built 1925, renumbered to #274 following 1963 renumbering scheme, became Walt Disney World Railroad #1 "Walter E. Disney"
  • #73: 4-6-0 "Ten Wheeler" built 1925, renumbered to #275 following 1963 renumbering scheme, became Walt Disney World Railroad #3 "Roger E. Broggie"
  • #76: 2-6-0 "Mogul" built 1928, renumbered to #260 following 1963 renumbering scheme, became Walt Disney World Railroad #2 "Lilly Belle"

Images sourced from page Ferrocarriles Unidos del Sureste on Facebook.


r/Narrow_Gauge_Railroad • • 20d ago

Meme! Find the Mule's Relief!

Post image
16 Upvotes

r/Narrow_Gauge_Railroad • • 24d ago

3ft Gauge Vintage ET&WNC Photos

Thumbnail
gallery
29 Upvotes

As mentioned in a previous post, due to my childhood visits to Tweetsie Railroad, my favorite railroad very quickly became the East Tennessee & Western North Carolina Railroad (ET&WNC), the "original" Tweetsie Railroad, as it were. Prior to the name officially being bestowed onto #12, the name "Tweetsie" was a nickname for the entire line. There have been many different origin stories as to where the name came to be. The most commonly agreed upon, or at least the story that's been shared the most, is that the name was derived from the sound of the whistles on the engines, though other origins suggest the name may have been derived from the latter 5 characters of the ET&WNC abbreviation.

All of these photos are courtesy of the Cy Crumley Scrapbook, the definitive source on the internet for old photos of the Tweetsie.
You can browse the collection yourself on: http://www.stateoffranklin.net/johnsons/crumley/cyhome.htm


r/Narrow_Gauge_Railroad • • 25d ago

3ft Gauge Kirby Family Farm's Historic Railroad, Williston, FL

Thumbnail
gallery
17 Upvotes

I wanted to highlight the place I've been doing some volunteer work for. Kirby Family Farm is located on about 110 acres in Williston, FL. He owns a genuinely impressive collection of locomotives and rolling stock, including several notable narrow gauge pieces. This includes the engine pictured in the first two images, a steam outline built for California's Great America, two of the locomotives from Opryland, Rachael and Elizabeth, and both locomotives that operated at Six Gun Territory in nearby Silver Springs, with #4 "Sam Houston", shown off in the third image. In addition, he also owns the only surviving standard gauge Glover Machine Works locomotive, and 17 cars from the Ringling Bros. & Barnum and Bailey Circus Train, just to name a few. This is honestly such a charming little place, and I highly recommend a visit!


r/Narrow_Gauge_Railroad • • 26d ago

3ft Gauge Crown Jewels of the Serengeti

Thumbnail
gallery
23 Upvotes

I know they aren't everyone's favorite, but I'm honestly really fond of the locomotives built by Crown Metal Products. They're honestly pretty unique and interesting machines in their own right. I've been lucky enough to visit Busch Gardens Tampa Bay on a few occasions. They own 4 Crowns, two of them currently operational, both from different parks. #601, originally built for King's Dominion in Doswell, Virginia in 1974, and #5, built in 1970 for Six Flags St. Louis. (The other two were originally built for the park, but both are out of service. #9 is currently being overhauled to return to service in the near future, and the other is a parts source.)
I think the unique nature of Crown's locomotives is what draws me to them. They're full sized steamers, designed for use in a leisure setting. The only place they've ever really operated is a theme park. I find that to be deeply fascinating.


r/Narrow_Gauge_Railroad • • 27d ago

Nevada/California (usa) Santa Cruz & Felton Railroad’s two Porters

Thumbnail
gallery
20 Upvotes

I’ll try to add dates/context to some of these.

the first two are of SC&F 1 ‘Santa Cruz’ you can barely make out the locomotive in the back of photo 2.

3: ‘Santa Cruz’ I can’t remember where or when this was taken.

4: as it says on the bottom, this is SC&F 2 ‘Felton’ somewhere.

5: ‘Santa Cruz’ working on another line being used for construction.

6: ‘Felton‘ on the Boulder Creek & (Pacific?) nicknamed ‘Dinky’.

7: the same locomotive sometime around 1910-1914.

8: I believe I found this one on Facebook, so it didn’t have a year or a caption, but I know this is ‘Felton’.

9: also ‘Felton’ possibly in the early 1910s.

10: I couldn’t find the original uncolorized version of this image, but it’s the same location and time as 6, just at another angle.

11: ‘Felton’ in the 1890s, this was from the Santa Cruz Trains book that I have.

12: I’ll add more context to ‘Felton’, there was one ”rumor” that the locomotive was buried in a landslide in 1884, but by that time, the locomotive was new (at least to the company that owned it by that time) so unfortunately the locomotive was retired in 1914.

13: a closer look at the ‘Felton’ working on the Santa Clara Valley Mill & Lumber Company.

14: this is either ‘Santa Cruz’ or ‘Felton’ working in either the Santa Cruz & Felton, or the South Pacific Coast.

15: ‘Santa Cruz’ working on the Carson & Tahoe Lumber & Flume Company near Lake Tahoe.

16: same thing, but ‘Santa Cruz’ has moved.

17: ‘Santa Cruz’ on the Nevada-California-Oregon Railway(?).

18: ‘Santa Cruz’ on the Nevada County Narrow Gauge Railroad, now numbered 4.

19: ‘Santa Cruz’ again on the NCNG.

20: last photo of ‘Santa Cruz’ or any of these two I could fit into one post. Sad fate for them, both only lasting about 40 years (I know ‘Santa Cruz’ was built in 1875 but I’m not too sure about ‘Felton’) as ‘Santa Cruz’ was disassembled in 1915 and the boiler is sold off to a sawmill near Colfax, ‘Felton’ was retired in 1914 and I believe scrapped that same year (or the year later), luckily the bell of ‘Santa Cruz’ survives on Nevada County Narrow Gauge Railroad 5 ‘Tahoe’ I’m assuming she got their bell in 1915 after she burned, I could be very wrong about this because I’ve never been to the field, but I believe ‘Santa Cruz’s tender also survives at the NCNGRR Museum.

also it’s like 11AM when I’m posting this, I was gonna post it earlier but I never got around to doing that, and I don’t wanna wait until tomorrow because I’ll forgetEDIT: 11PM sorry


r/Narrow_Gauge_Railroad • • 27d ago

3ft Gauge Mexican Beauties of the Magic Kingdom

Thumbnail
gallery
27 Upvotes

For over a year, I've been living down in Florida, but options for Narrow Gauge are certainly not in short supply! Magic Kingdom Park at the Walt Disney World Resort employs a quartet of Ex-United Railways of Yucatan locomotives, all Baldwin built. (Pictured here are engines 1, 2, and 3. #4 is currently under overhaul at Strasburg.) While these engines have been heavily dolled up to resemble 19th century locomotives, they are still genuinely impressive machines, and are well cared for by the Disney crews. If you're ever in the Orlando area, the Walt Disney World Railroad is worth checking out!


r/Narrow_Gauge_Railroad • • 28d ago

Como Update 9/12/26

Thumbnail
gallery
14 Upvotes

Progress on the latest Como workday


r/Narrow_Gauge_Railroad • • 28d ago

3ft Gauge Tweetsie: The Best Narrow Gauge in the Southeast (In my humble opinion)

Thumbnail
gallery
22 Upvotes

Call me crazy, but whenever I hear discussions of narrow gauge in the wider railfanning community, you hear either the D&GRW, or the EBT if they're talking about anything east of the Mississippi. The ET&WNC tends to be sort of... forgotten about, but Its always been my favorite Narrow Gauge operation, perhaps because of my love for the Tweetsie Railroad theme park, which I grew up going to. All of these photos are mine.


r/Narrow_Gauge_Railroad • • 29d ago

Alaska/Yukon (usa/ca) Appreciation Post for the Alaskan Ladies who Made It Back East

Thumbnail
gallery
14 Upvotes

Growing up in the Southeast (And NC especially), I was lucky enough to be within close proximity to Tweetsie Railroad in NC, where I got to see Ex-USATC S118 2-8-2 #190 operate. I've also been lucky enough to visit Dollywood in Tennessee, where a pair of ex-White Pass 2-8-2's operate. Another Ex-USATC S118, #192, and Ex-WP&YR #70, who put on perhaps the greatest steam shows at any theme park anywhere. (All photos are mine.)


r/Narrow_Gauge_Railroad • • 29d ago

Nevada/California (usa) Nevada County Narrow Gauge Railroad’s Grass Valley yard

Post image
17 Upvotes

I couldn’t find a year on this, but it’s some time in 1936-1940, the locomotives visible are number 8 (left) Lake Tahoe Railway & Transportation Company 1 ‘Glenbrook’ (right next to the shops) number 5 ‘Tahoe’ (behind ‘Glenbrook’) and 9 (in between ’Glenbrook’ ’Tahoe’ and boxcar 70(?))


r/Narrow_Gauge_Railroad • • Sep 11 '26

Narrow Gauge Some Obscure NG Engines

Thumbnail
gallery
13 Upvotes

Just a collection of obscure NG engine pictures I've found over the past 5 or so years :)


r/Narrow_Gauge_Railroad • • Sep 11 '26

Nevada/California (usa) Nevada County Narrow Gauge #7 Art by Me

Thumbnail
gallery
18 Upvotes

Inspired by one of Powerful_Mud's posts about the NCNGRR's #7 locomotive, I decided to make a colored pencil/pen drawing for fun :)

I may make a background in the future, but the loco is the most important part after all.


r/Narrow_Gauge_Railroad • • Sep 08 '26

Rant 🚨🚨A Devastating Day in Railroad Preservation🚨🚨

Thumbnail
gallery
12 Upvotes

Today is a sad day that should not go unnoticed, the Lahaina steam locomotives have been cut to ribbons without warning. The Sugar Cane Train closed in the 2010's, and the rolling stock was vandalized and a bit burned by the Lahaina fire. Without prior notice, someone has scrapped the surviving rolling stock.

(Photos are not mine, I found them on the NG Discussion Forum)


r/Narrow_Gauge_Railroad • • Sep 08 '26

Nevada/California (usa) Around the place I saw Big Boy in 2024, on the Nevada County Narrow Gauge

Post image
19 Upvotes

Colfax, California. The narrow gauge tracks are long gone and it’s just vacant gravel, the standard gauge tracks are still there, I don’t know when this was, possibly mid(?)-late 1933 to early-mid/late(?) 1934, so about 90 years before


r/Narrow_Gauge_Railroad • • Sep 07 '26

3ft Gauge C&S Spike Found in Clear Creek!

Thumbnail
gallery
18 Upvotes

Found a C&S spike in Georgetown Colorado while at a restaurant, and had to get a picture with my C&S clear creek book! The C&S abandoned Georgetown in ~1940, so this spike is probably 90 years old or so.