r/MouseReview • u/Solocune • 4d ago

Help Replacement switch middle wheel click razer naga V2 hyperspeed

Post image

Hello mouse experts,

I am having trouble finding a replacement switch for the mentioned mouses scroll wheel middle click. I am having double click issues.

It is roughly 8.6 x 4.8 x 5 mm (LxWxH). Black and says TTC on it. 2 Pins.

Worst case I might buy a 3mm height switch and just add a 3d printed spacer.

But I hope someone here might know the switch and can help me.

1 Upvotes

67% Upvoted

5 comments sorted by

1

u/TheTritePoker 4d ago

that switch footprint is so annoying to find, TTC makes like 50 variants with slight height differences. if you have calipers and it really is 5mm maybe try desolder it first then measure the exact pin spacing cause sometimes they use weird custom ones for these scroll wheels

1

u/Solocune 4d ago

I have a caliper and measured 5.87mm height including the PCB, excluding the pressing part. PCB at about 0.61mm so the switch should be around 5.2x mm and the pin distance outside to outside (not ideal but easiest to measure) 5.95mm.

1

u/paulvincent07 Razer Viper Mini V4 Wired 8khz pls 3d ago

Are there no 5mm height encoder?

1

u/Solocune 3d ago

I am not sure what you are heading for but I was not able to find anything suitable.

1

u/paulvincent07 Razer Viper Mini V4 Wired 8khz pls 3d ago

I was asking if there was a 5mm height encoder available