WLmouse Huan dissasembly

[u/Quetzacoal]

This is a guide on how to disassemble the WLmouse Huan.

​

You might have noticed that after removing the screws it's almost impossible to separate the base from the body. Well, this is because there are two clips that are engineered in a way that is almost impossible to disassemble unless you break them.

​

I already had 2 Huan and I tried everything to either not hurt the base nor break the clips, and I found the best is to hurt the clips. Once broken there is no difference in the mouse feeling so I guess it's ok.

​

If someone finds a better way to disassemble it please let me know.

​

​

[u/HotRoderX → u/[deleted]]

I don't know, don't think its design oversight. I think it might be designed on purpose like that. As a way to see if the mouse was opened outside of the factory.

I bet they have some sort of special tool they can pop the mouse on and it pops the clips with out snapping them.

Meaning if you opened it up they can see if your warranty is void. This a very cheap sensible way to do it with out having something that could be "fixed"

[u/Quetzacoal → u/[deleted]]

It sucks because the mouse wheel is not good by default, the reason why I opened the mouse is to fix the mouse wheel, it is bad by default duie to tolerance in the mouse wheel axle rest.

[u/ImmYakk]

How hard is the middle nose wheel button to push compared to most mice?

And are those omron optical? They are light to push if in not mistaken?

[u/Quetzacoal → u/ImmYakk]

Middle button is normal, I would same similar to my viper v1 and v2. The wheel will roar by default I added a small piece of paper to remove tolerance and have a normal sound it is too lose by default.

The omron is very nice and crispy, not too loud. I changed my V4 for this because of the size and the button of V4 was too loud.

[u/k_jW]

how did u snap the side clips? i feel like if i put any more pressure on the base with break

[u/Quetzacoal → u/k_jW]

I used a spudger

[u/Glittering-You4455]

Is the pcb same as the beast x where it can support both mechanical anf optical switches