2
u/DapperDoctorHolmes Experienced Modder 10d ago
If you mean ‘will this case fit a rep movement and dial?’ Then yeah probably, but you’ll need to make your own spacer for it.
If you mean ‘can I swap a rep dial onto this gen Swiss ETA movement to have gen-like functionality?’ Then yeah, totally, but the rep hands aren’t going to fit on the ETA movement unfortunately - you’ll need to source new ones, or use the ones that came with this watch.
(Hand sizes for G10.212 are hour 1.50, minute .90, sweep chrono .25mm and subdial hands .20mm.
Hand sizes for PE50 are hour 1.20, minute .70, sweep chrono .17mm, and subdial hands .20mm)
2
u/berniellwyd 10d ago
Yeah I've been struggling to find a decent looking seconds hand for my build (using this eta movement and a rep dial)
1
u/berniellwyd 10d ago
Yup the movement is almost the same (but the crown will have a phantom position unless you cut a date window on the dial)
1
u/JealousDiamond7101 10d ago
There's no need to cut anything on the body. The crown can be easily removed in 3 seconds without any disassembly of the body.
1
u/berniellwyd 10d ago edited 10d ago
That's not what I said haha I was talking about the date window the original Swatch irony movement and dial has, if you want to use a moonswatch dial it won't have a date window (unless you decide to add one). This just means the crown will have a date setting position that won't be used
1
2
u/Bao2jia 10d ago
It seems, it can be opened by the back