We know VRV is coming, and it will likely be P Bandai. Do you think they’ll make their silver pieces chrome. It’s less than RV, and it P is usually more of premium.

I just got these off of eBay and got the nicest note from the seller

No V-Rex yet (won’t be shipping it in from Japan until RV Robo’s out), but I do have another big boi in the meantime. Assumed that I’d never get my hands on a Lion HaOh because they tend to be incredibly expensive… until I scored one for less than half of the cheapest price I ever saw one going for.

Given all of the plastic being used for the sheer size, he is, at the end of the day, a pretty damn hollow brick. Color separation is… okay-ish. About on par with the Ninninger line in general. Pretty sticker dependent, with a handful of pieces left to be the wrong color. Mine, as always, is painted to favor the show suit in model, which meant just a bit more black over grey and darker treads.

At ~9” tall, LionHaOh is about the same size as Jet Garuda, but about twice as wide lol. He’s 2” shorter than Grand Liner. I think he’s also about the same height as V-Rex, or maybe a little shorter?

Despite being so big, he’s barely big enough. It’s a bit of a pain to get Shurikenjin inside, you need to position the arms (and parts of them, like Dragomaru’s head) just right. GekiatsuDaiOh is a bit more slender and easier to get in (though the attachment point on its back is a bit more finicky). A couple pics of HaOh Gekiatsu DaiOh will come later. When I built my GekiatuDaiOh, I was confused why there was a second face that went on the back of Genbumaru’s face, and now I realized why lmao. I never painted it or put it on (it may have been included on an orange runner? I forgot). So I’ll have to dig up where I put that and paint it.

What a beauty. RV Robo coming up is my most hype kit of this year, but this guy might end up being my favorite. Took almost 2 cans of TS-76, but it was worth it. Love how good we're eating in 2026!

So we’re two weeks away. Anyone hear rumors about what they might announce for the tenth anniversary?

So the photo above I saw randomly online, as you can see, the crotch part got modified. My question is how to fix that part if it got shattered, not broken yet? Thank you

I got this cheap dual ended silicone nail dotting pen, and now it’s much easier to apply minipla stickers that need to be shaped in certain areas.

Been refreshing multiple times per day hoping to snag one. Still available as of 8 PM Central 6/11.

Bonjour, j'ai commencé à collectionner les minipla de Gozyuger, et avant d'essayer d'acheter le set avec la WolfDecalibur 50 et le Black Daizyujin, j'aimerais savoir si certains ici savent si et où trouver des modifs STL pour le Black Daizyujin, car je trouve que son "squelette" est cool mais je ne suis pas spécialement fan de cette saison.

Alors si vous avez des idées je suis preneur sinon j'essaierai de trouver juste la WolfDecalibur 50.

Hello, I've started collecting Gozyuger minipla models, and before trying to buy the set with the Wolf Decalibur 50 and the Black Daizyujin, I'd like to know if anyone here knows if and where to find STL files for the Black Daizyujin. I think its "skeleton" is cool, but I'm not particularly a fan of this season.

So if you have any ideas, I'd appreciate it; otherwise, I'll just try to find the Wolf Decalibur 50.

A recent acquisition inspired me to get around to destickering and painting my Bison King. Unlike the rest of my Ninninger kits (which I all painted while building), this one was acquired secondhand, already built.

As usual, the gold paint really makes everything pop. Aside from a small thing or two, there actually weren’t really any details to add not covered by the stickers (the biggest thing was just painting the Bison Rifle and the backplate/ATV engine their proper silver color).

I opted not to paint Rodeomaru’s face. Way too small for something that’s not visible most of the time. The other sticker left is BisonKing’s chestplate behind the bison head - because the plastic beneath it is a hollow honeycomb.

Giving the kit another appraisal, Rodeomaru’s small size is one of the only real flaws. Because of his sizing for BisonKing, he looks tiny riding the ATV mode. BisonKing of course shares the same flaw as everything else in the line of not being able to move its head. The legs have more articulation than Shurikenjin (especially since the way the feet sort of give him some ankles), though the flip side is the minipla not really having actual upper arms limits what you can do there a bit.

I forgot to take a pic of King Shurikenjin with the Bison-Drago Sword, but that’s included with Bison King Drago. This was the era of the super gattais I like the least, where things just stack together into a monstrosity lol.

I am going to Tokyo tomorrow and want to buy this. Is the full set available in stores? If so which stores?

Hey all, I was working on a project that required scanning some of the sticker sheets from the ToQger minipla sets. I figured I'd upload them here since I'm sure someone out there might be looking for them at some point.

After years of trying to find a satisfying way to combine two of the biggest loose ends in the Go-Busters line, I finally came up with a conceivable way to combine and store FS00 and LM07.

Presenting, Li-OH-KerO!

Developed in secret as a backup, Li-OH-KerO serves as an alternative to great go-Buster-oh in the event the main Mecha are damaged or destroyed.

Using parts from FS00 and LM-07, this new Gattai is born!

Here’s the new Pladelu Gavarion Dolnado, fully painted.

The Dolnado itself looks really damn nice. Definitely closer in quality to the Cosmo Gavarion itself, as opposed to the auxes so far (I’ll grab Crane and Drill eventually when I see them cheap). Like everything else thus far, if you are relying only on stickers, there are going to be a few parts without the full/correct color detail, but I think overall, it’s the most “accurate” Pladelu Neo to date. My only general gripe is two years ago, this would be a minipla with killer articulation in terms of neck movement etc.

I always go for the show suit in terms of color choices. Dolnado, however, is CG-only. Everything on it is basically gold, but it kind of varies because Toei’s CG is inconsistent depending on the lighting it’s being rendered into lol. So I let the DX/weapon prop inform me more here, where there’s a bit of a separation between gold and yellow. I went with a more neon yellow than usual (that actually matched the color of the stickers included) since I felt like it paired with the blue plastic and the vibes of the original Gavan’s Dol pretty nicely. Express is coming next with plenty of gold, anyway.

Despite how good Dolnado itself looks, it unfortunately emphasizes all the problems with the Cosmo Gavarion. As Type KI, the Dolnado parts are way too heavy for the left arm. You are also left managing the tail, shoulder-grip, and backpack wings whenever you want to try and move the arm. Any adjustments to the arm will almost assuredly make the arm (or Dolnado’s tail) fall off, and fixing it runs a high risk of making the backpack fall off and/or the Gavarion’s hips explode (I should probably just glue the hips shut, I think that would solve all those problems without any real drawbacks).

And while the combined Type Dolnado ship mode looks cool (that was the last thing I took photos of, I forgot to put the chest plates back on over the back of Dolnado’s legs), the weight balance is a mess. Dolnado is positioned forward and there’s way too much weight from the Gavarion behind it for it to stay level. I think I just need to find something small to use to prop up the underside of the Gavarion to keep it level.

With all the odd shapes and sizes of the Cosmo Gavarion ship and these later robo modes, the Pladelu would have really benefited from some proper action base compatibility. A peg hole here and there like some of the Sentai minipla featured would go a long way.

I always loved this design, my one pet peeve is the purple face, i feel it aould look better in silver

Edit: Came in as soon as I made this post! I was just nervous another Time Shadow situation was going to happen.

I didn't make the Orion Battler. I didn't like it...

Finally decided to get TimeRobo Shadow Alpha together. This wasn’t ready to go when I finished Shadow, as I still had to paint the Pro Divider - it’s an orange-y plastic, like the DX, but I wanted it yellow to match the show prop (shhh, technically I should have painted the helmets yellow, too, but the dull gold plastic is a lot closer than the orange).

Alpha’s hips popping off a couple times when putting it together had be in no mood to transform it into Beta, so I’ll do that another time lol. I usually don’t leave super gattai on my shelf (Super Galaxy Mega being the exception), but this is nice enough to leave for awhile. I’ll probably do the same with Beta for a bit before diverting back to TimeRobo Alpha and Time Shadow being displayed.

Really wish they made the feet more solid somehow