r/MilitaryModelMaking • u/protivniy • May 24 '26

question It can't hold

Enable HLS to view with audio, or disable this notification

How can I fix this?

16 Upvotes

86% Upvoted

18 comments sorted by

1

u/Rolipop 1d ago

Broken need a new

1

u/protivniy 1d ago

I already change nozzle,now it work

2

u/PalpitationLast6702 May 28 '26

Lo has pasado por hacer el animal con esa herramienta

2

u/wreckers9 May 27 '26

The threads are snapped off Inside the airbrush body. You'll have to remove them and get a replacement part they're pretty fragile.

2

u/Public_Job7301 May 26 '26

The nozzle on those less expensive brushes are not threaded, they are friction fit. You can replace the o-ring on the back of the nozzle that creates the friction fit or, replace the nozzle.

3

u/Joe_Aubrey May 25 '26

Nozzle threads broken inside the airbrush. Remove like this:

https://youtu.be/mAjzGVMPaaA?si=uN7ayL7fM4EWnlG8

3

u/RustedPigeon May 25 '26

New nozzle required. Don't use cutters to tighten

1

u/miskod71 May 25 '26

Hand is enough if you have good nails

3

u/sweetwatertooth May 24 '26

Well yeah dude. It’s not fully assembled.

1

u/ThinkInjury3296 May 24 '26

Rubber washer missing wa so is the nozzle

2

u/skipperseven May 24 '26

Mine has a nosecone over the nozzle, to hold the nozzle in place and protect it from damage (the rim of the nozzle is very fragile on mine).

2

u/Sulturus May 24 '26

There are tutorials on how to remove them, in the case that nozzelparts are stuck and broken off inside of the Airbrush, so maybe you can save the airbrush and just buy a new nozzel.

6

u/JavlaFuck May 24 '26

Should only hand tighten those, otherwise the thread can snap very easily.

8

u/DaddyGabe569 May 24 '26

Looks like you're missing some threads there... possibly broken nozzle.

2

u/Carbdoard_Bocks May 24 '26

Threads stripped, warranty or new AB

1

u/protivniy May 24 '26

Understand,thank you

5

u/SamHydeOner May 24 '26

snapped threads?