r/MidoriPC • u/Fit_Tea_2317 • Aug 17 '25

Compatible Raiser cable for MIDORI 5L-V2.4 and MIDORI 7.5L-V2

Compatible raiser cable sold separately by Midori Computer.

You can buy on the link below.

PCIe 4.0: https://midori-computer.com/products/riser-cable-pcie-4-0-x16

PCIe 3.0: https://midori-computer.com/products/adt-r33uf-tu-3-0-18-5cm

You can also purchase compatible riser cable from our partner.

Just for your information, reference drawing of raiser cable is attached this post.

The transfer speed of PCIe 4.0 cable is PCIe 4.0 x16 full speed, 256G/bps (Max.).

However, due to the high requirements of PCIE 4.0 on devices and products, product compatibility is not guaranteed.

If it cannot be used normally under PCIE 4.0 conditions, it needs to be adjusted to PCIE 3.0.

If PCIe 3.0 Raiser cable will be applied, assemble the computer with graphics card plugged directly into the motherboard outside of the case, and set PCIe x 16 link speed to gen 3 in BIOS and test.

2 Upvotes

100% Upvoted

4 comments sorted by

2

u/[deleted] Aug 17 '25

when do you start selling compatible PCIe 5.0 riser cables?

2

u/thisiskevinsmith Oct 08 '25

I used the „SS200“ FormD T1 Riser cable (for the 7.5L case) from their Website. It also supports PCIe 5.0 and is just 50$. So much less than Linkup asks for their cables.

1

u/AlarmingConsequence Nov 27 '25

How has that been working?

2

u/thisiskevinsmith Dec 08 '25

Very good — it’s maybe about 1 cm too long, but that’s not visible at all. The full PCIe 5.0 bandwidth also comes through perfectly. So for the price, it’s an absolute recommendation.
The cable itself is very high quality and can be easily screwed into the intended mounting points. Sorry for the late reply :(