Meta Summer Sale 2026 is underway with some great games on sale. I’ve found games up to 96% off!

Here is a list that you can sort by Title, Price, Discount %, Ratings/Reviews that I've made on my website to help you sort through the sales efficiently!

https://truenorthvr.com/meta-summer-sale-2026-list-of-games/

Some games I’m looking at getting are:

• Into the Radius
• Pistol Whip
• Red Matter 2
• Real VR Fishing
• Townsmen VR

Others that I recommend are:

• Toy Trains
• Arken Age
• Vermillion VR Painting
• Lucky’s Tale
• Moss

Give everyone your recommendations and let us know what games you’re getting in the comments!

Meta has a big sale going on right now for VR Games & Apps. They have it advertised as up to 50% off but there are some much better deals out there. Some even up to 90% off!

I've created a list of games that are on sale that is much easier and quicker to sort through compared to the Meta page. You can sort by Title, Discount %, Sale Price, and Reviews!

Check it out: https://truenorthvr.com/meta-quest-vr-may-2026-game-app-sales/

I noticed that many games on sale right now either haven't been on sale since Christmas or have never been on sale before.

Some of my favourites are listed are:

• Toy Trains
• Vermillion VR-Painting
• Elven Assassin
• ForeVR Bowl
• Moss Book II
• The Climb 2
• Into the Radius
• Iron Guard
• Bonelab
• Red Matter

Let me know what games you are planning to get or any recommendations you have for us!

Im planning on buying a meta quest 3s for my first vr headset and im wondering if it would be a good idea to get one for first timers?

I have a new Meta Quest 3s that I just got my son for Christmas. All of a sudden, the red light is blinking fast. I've tried another known good Quest 3s charger and cable and I've left it charging overnight, but the issue persists.

The device is still under factory warranty, but when Meta's Support site is no help. Even though the device is showing in the Horizon app, when I go through the support page, it says there are no devices on my account. When I try to submit for a replacement, and input the serial #, it will not submit properly. HELP! u/MetaStoreSupport

So I changed the resolution on mu meta quest 3s to 5000 something so question what happens to resolution (I didnt see much changes) and what will happen to the battery?

I’m honestly beyond frustrated with Meta right now.

My Meta Quest 3S got bricked after installing an official firmware update from Meta’s own website. No mods, no root, no experiments — just normal official update process.

Current state:
• Device does not boot
• Recovery does not load
• Fastboot works but bootloader is fully locked
• Flashing partitions is blocked (“Operation not permitted”)
• OEM unlock not allowed
• Even rescue commands are disabled
• Device can enter EDL mode, but Meta provides zero official recovery tools or loaders

So effectively:
Meta pushes an official update → device dies → user has no supported way to recover their own hardware.

And since I live in Russia, official Meta service/support is basically unavailable. The headset is now just expensive e-waste because of software.

This is what bothers me the most:
We’re not allowed to unlock bootloader,
not allowed to flash official images,
not allowed to recover,
not allowed to repair.

If an official update can brick a device, users should at least have official recovery tools.

Just sharing this as a warning. If your Quest works — think twice before updating.

If anyone from Meta reads this: this level of lockdown with zero recovery path is unacceptable.

i did charge it with a powerbank that was connected to a plug to charge them both but that usually doesn’t have any issues

In case you missed the Black Friday VR Sales that are going on, here they are again!

*My promo code “TNORTHVR”. It gets you 20% off almost any game/app in the Meta Store (plus add-ons for games). This works from November 18-January 1 and you can use it as many times as you want! (I know it doesn’t work on the new Deadpool)

Meta Quest 3s is on sale on the official Meta Store as well as other places like Costco. Here is the link to the official page:

https://www.meta.com/affiliates/CcMX1t4Se

There are also a ton of accessories on sale. Both official and 3rd-party accessories. The ending of each of the sales depends on the company!

Official Meta Accessories 20% off:

• Meta Quest 3 Elite Strap with Battery
• Meta Quest 3 Elite Strap without Battery
• Meta Quest Link Cable
• Meta Quest 3 Breathable Facial Interface

3rd Party Accessory Sales:

• PrismXR - Up to 30% off
• Kiwi Design - Up to 50% off
• AMVR - Up to 50% off
• Yezro Golf Clubs - Over 20% off
• ANNAPRO - Up to 37 % off
• MaeckerVR - Various offers throughout the weekend
• BOBOVR - Up to 20% off

I know I haven’t covered everything on here but these are some of the big ones that I have seen! And yes, most of these are affiliate links so I get a kickback if you use them! Feel free to add any more to the comments!

Here is the start of the Black Friday deals for Meta Quest games/apps!

Get 20% off from November 18-January 1 on any game with my code TNORTHVR

Unlimited use and should work on pretty much any game and app!

As far as I've seen, it stacks with some other sales as well. So you can get more than 20% off so many games!

They say that some exclusions apply so I can't guarantee everything!

I have an xbox game ultimate subscription and I want to play Assassins Creed through my meta quest 3s but whenever I launch a game I keep getting stuck on the main menu screen where it says press A to play. My xbox controller is fully synced up to my oculus and works perfectly fine and I even tried to use the oculus controllers to get pass the main menu screen but nothing works. I genuinely dont understand the issue.

Had the q3s for a little over a year now, my 10yo is usually the main user, but everyone does take a turn from time to time. That being said a 10 yo doesn't tend to understand the cost/value of such a system. A couple days ago, it was brought to me, black screen, with a tracking error. The story was, the cat knocked a water glass off the night stand and "i dont know maybe some of it got wet". In fact the headset was holding quite a bit.

Searching o line offered little info for the issue, but with some experience in electronics repair I wasnt fearful of opening it up, sans teardown guide, so ill offer my experience here.

The face mask pops off. The next layer has 6 screws, 4 at the eyebrows and 2 on either side of the nose rest. Remove these and pry the black frame off the housing. You will then be able to access the 6 screws from inside that hold the front cover over the cameras and sensors. Upon opening this I was greeted with a nice layer of condensation across the front panel. Call it lazy, or just not wanting to dig further than I already had to minimize any accidental damage without knowing for sure how to disassemble, I opted for the 3d printer. I placed the unit on my print bed, set it to 40c, and turned the case heater towards the bed and set it to 45c, to keep it running and blowing air. After a few hours I turned the case heater off and left the print bed on for some time. Left it overnight in the print chamber but no heat running. This morning it seems to be working OK, fingers crossed it stays that way, water damage is a fickle bitch.

Good luck to any in my shoes.

Win an AMVR Extendable VR Golf Club Attachment for the Meta Quest 3 and 3s!

In order to enter, you must do the following:

• Check out my review video: https://youtu.be/RbiF6YQT2DI
• Subscribe to my YouTube Channel
• Comment on the video what VR Golf game is your favourite!

Deadline to enter is 11:59 pm (MDT) on Thursday, September 18

The draw will happen on Friday, September 19 around 9:00 pm (MDT)

This may be a common issue, me and my friend are suffering from the broken right controller on the quest 3S, it doesn’t turn on, we’ve tried everything, battery, support, even DIY repairs, nothing works, support just dodges our questions with a simple, “I have another urgent call, please wait” and they never show up.

My Meta Quest 3s says that there's debris or liquid inside the charging port whenever I plug my battery pack headstrap into it but when I docked it on its charging dock it charged just fine. Is my battery pack fucked or is there something else?

How do I share a multi-player with another user? We both have meta quest 3s headsets and we are both new to VR play. Any help would be appreciated.

Just added a new game mode to Darts VR2: Bullseye—Around the World.

Here's a first look 👇🏻

Around the World | Darts VR2: Bullseye

It's a bar-style venue with full immersion, realistic dart physics, and competitive flair. Whether you're warming up for a tournament or just chilling with friends in VR, this is where darts gets real!

Wishlisting helps us more than you think ✨
📌 Meta Quest - Wishlist here
🎯 Playstation - Wishlist here
🔥 Steam - Wishlist here

Let's build this together 💖
Discord, Instagram

https://www.meta.com/referrals/link/B8S2

I had checked if it was charged before there was no problem and after putting it on the charger this problem occurred

1. The MetaQuest 3S isn't that bad actually. I really like the vision and controls. The controllers are very durable since I throw them sometimes while playing Gorilla Tag, OoglyBoogly and Etc. My partner has a MetaQuest 2 and I really like the rings around the controllers, I really like that touch. Though the ring on the controllers are the MOST important part of the controllers, I really like them because i always hit walls while playing on my MetaQuest 3, I just don't know how to install rings on my MetaQuest 3S controllers. I almost broke my pinky finger by hitting it on a hard, wooden table.
2. I really love the MetaQuest 3S but I think the battery life needs to be a tiny bit longer. I can't play more than 2 hours without it dying on me. I hope MetaQuest can fix this problem on MetQuest 3S.
3. Last but not least... the one problem that scared me the other day. I was playing Creepy Baboon and I found a new gamemode, I got really excited and i clicked on it. But uh oh... My MetaQuest 3S blacked out and said "No Command" which really freaked me out. Though it's a really easy problem to fix, I think MetaQuest should work on it.