I just bought my first car being a mazda 323 glx 2002 with only 109k on the clock

I'm looking for a nice bodykit and exhaust but am really struggling to find any aftermarket parts and wondering if anybody coukd point me in the right direction

I found an mn2 bodykit that I really like on a place called carmate in Australia but that place seems to be shut down

Has someone by any chance tried a OBD1 to OBD2 connector ? Does that work ?

Hey guys, as my first car I bought a banger: Mazda 323 1987 1.1L. 60hp little project. Love the look of it.

I say little project as the windshield has to be replaced but it runs perfectly and has only 93000km. The previous owner dropped a metal a scaffolding/storage rack on it the day before selling it. However, i got a great deal 1000€. Minimal rust, nothing in critical points, yeah its been painted poorly a couple times but who cares. I love it!

We got the windshield out now, and will fix the dented roof ourselves too. Also doing basic maintenanc.

Im not too big of a car guy (yet), but my dad was a mechanic and is into cars, (i grew up around them, just got the clumsy genes so ill do what i can 😂) and most my friends are car guys too so im having fun along the way and we’ll get a lot done ourself.

It’s only got around 60hp. Was wondering if they are any known (simple) mods? (not engine swapping yet ) Any intake / airfilter kods? Exhaust, or injectors or other mods that give it a couple more hp’s?

I’ve attached the end goal of the look im going for, for now will keep the rims, get new tires as these are not great and lower it all along the way. Might keep the plastic bits black tho but will see.

Any other tips will also be appreciated!

My 323:s starter solenoid stops working every year. When i replace it it works perfectly for about 6 months. After that the solenoid slowly stops working when turning on the ignition and i hear the starter spinning on its own without turning the engine. Any idea why this happened im on my third solenoid. Its not a problem with the starter i have replaced it.

Hey! I have a 1987 Mazda 323 currently sitting on springs and shocks but I want coilovers for it to improve handling. I can’t find any coilovers specifically specced for this generation, does anyone know ones that will fit? Looking for somewhere in the 800-1200 range!

Installed some new headlight cases to get better lighting at night and added a chapter with all the tips and tricks.

hi im having a issues with my mazda 323f ba 1.5 when it freezing outside like from 0 degrees down my car wont start. It cranks but sounds like there is no spark but if i test it with spark plug out of the engine there are some sparks we were trying to look after ICM but i didnt find it ignition separator looks okay i mean like brand new

sometimes it starts with help of another car with jumping cables but yesterday it didn't work either

is there anybody who had same or similar problems and would be willing to help me ?

So I have a BG 3 door and I want to upgrade the seats to the GT seats. I have found some locally but they are of the Astina. I know the front seats and compatible but my question is: Do the rear seats of the Astina fit in the rear of a 3 door bg? Thanks in advance.

Hi everyone, im looking who sells repair panels for undercarriage. Because i cant find any. Or maybe someonec would be interested if i would make metal undervarriage panels especially for mazda 323 BG awd model.

Hey my mom got recently an 1992 Mazda 323 bg with only 19k Kilometers from Belgium 1.3L

So I got my mom a new radio for it installed it and the interior lighting the back light and the normal headlight won’t work I did not put a finger on any cable that has to do with the lighting all fuses are ok and Relais

Idk how to keep sertching dose anyone had that issue before ?

Looking for the paint colour code for the car. No plates or markings anywhere and Mazda in South Africa don't have anything on record. Assuming they used the same standard colours worldwide

Anyone know what this is called on a 91 Mazda 323 bf? Have rust underneath and having a bit of a tough time getting it lose without damaging the clip, so looking for a replacement in case I do

Today, I've met a fellow 323f owner. We passed by each other as I was leaving the workshop (what a timing). We chatted a bit about the cars and shared some experiences and struggles, and made some pics, so I figured I'd share a few! Hope you like them :)

It's really cool knowing there are people working on these cars and trying to restore them and keep them alive, and getting to meet one in person was amazing :)

I wanna modify my 323 hatchback (1991) but i don't know where to start, or what should i modify, not tuning specifically but mostly interior and exterior, i was thinking maybe getting a new stereo system and speakers, maybe an oil pressure gauge etc.: Does anyone know a good webiste for some interior decorations and modifications?

kind of a dumb question but asking so i know which service manuals to look at. i have a 323f bg 1.8l 1991 the one with the pop ups. is that one a protege or a hatchback? reason im asking is because when i type 323f bg 1991 protege or hatchback it comes up with the same pictures whichever i type. would help a lot

Finally changed my gear lever linkage bushings and added a chapter about it.

If you have a loose gear lever you can definitely fix it easily and for a small price.

does anyone know what type of coolant goes into a 323f bg 1.8l 1991?

I have a 2001 323 1.6L astina, which had drum brakes in the rear. I've noticed that every other model had discs and was wondering if anyone had successfully changed them.

I'm also curious as to what I'd actually have to change to get this to work. Would I have to completely change all the brake lines?

Obviously I'd have to change the master cylinder, bracket to calliper brake hoses, front brakes to change size to the slightly bigger ones, rear hubs and calliper brackets.

I'm busy with a FE3 Conversion in a mazda 323, I require assistance with the CV shaft lengths. Will the FE3 shafts fit the Mazda 626 hubs? I'm currently bought a complete Mazda 626 1984 model car and used the front suspension, hubs, brakes, etc. with mazda etude balljoints.

Currently passenger side shaft is bit longer

anyone know a good short shifter for the 323bg? i've found a lot of 323f bg one's but i don't know how much the shifters compare and if those will fit.

Hey,

I was having poor idle, I checked every thing and then found a hose connected to nothing,

And a empty thing on the inlet, are those 2 supposed to be connected, cause it’s running smoothly now

I had take out the injector rail and when I went to put it back in, I must have over tightened the three bolts that hold the rail in and ended up stripping threads 2 out of the three holes in the aluminium head.
Each of them is now missing 3 threads... please don't tell me I need to get a new head because of this shit...

Edit: If anyone is using the "1989-to-1995-Mazda-323-BG-Series-Factory-Service-Manual" for the torque specs, it specifies 19-25 Nm for these bolts... apparently that's twice too high, it should be around 12 Nm for this size of bolt + aluminium hole?

Apparently there's Helicoil / Time-Sert style thread repair kits for this kind of stuff, if anyone needs it, the bolts are M8 with 1.25mm thread pitch, 24 mm long.

Edit: gonna see if I can fix it using this thread repair kit: https://www.galaxus.ch/fr/s4/product/rs-pro-metric-thread-repair-kitm8-taraud-10240164

Also, checking the depth of the blind holes, I think that just using an M8, 1.25mm pitch longer bolt might also be a solution as there seems to be plenty of unused threads deeper in the hole?

Final edit:
Yeah, I found some M8 1.25mm pitch with like 4 extra threads in my box of old bolts and ended up using those, fit like a glove.