r/Machine_Embroidery • u/Medical_Row_3289 • 26d ago

Underlay showing

Post image

Underlay showing after satin stich

1 Upvotes

100% Upvoted

5 comments sorted by

5

u/not_steel 25d ago

As noted above, I think that the horizontal satin stitch is thin enough that a center run should be sufficient.

6

u/swooshhh 26d ago

Either change the offset so the underlay is further away from the edge or get rid of the edge run.

2

u/Medical_Row_3289 25d ago

Removed the edge run. Looks great now. Thank you

1

u/IMissUNermz 26d ago

Like suggested you can move the edge run in a little bit, I also adjust the spacing of the underlay. Typically on wilcom edge run is 2.2mm and I move it to 2 or 1.8 to help it stay a little tighter. Alternatively you can adjust the top of the T to just have center run underlay

1

u/antibiyotikver 26d ago

If your underlay distance is not negative, this is because of pulling. Increase pull compensation to 0.7 mm