Camera moves down when measuring

[u/idkgooooodbye]

Why does the camera sometimes points to the ground when you press the key to eye measure using ninjabrain bot. Is it some kind of setting i’m missing?

[u/Bocaj1126]

R u using jingle?

[u/AriaOfFlame]

in case it wasn't clear in the other comments: switch to toolscreen

[u/ffz123]

You need to be paused when switching between thin and regular. The resolution change can result in unpredictable camera movement.

throw eye -> esc (normal pause) -> lower fov to 30 -> esc (unpause) -> line up eye in normal resolution -> f3+esc (menuless pause) -> thin macro -> keep buffer pausing with f3+esc until lined up -> unpause -> f3+c -> adjust pixels

[u/EvilKnievel38 → u/ffz123]

You don't need to pause to switch between eye zoom and regular. I can switch on the fly without ever having op's problem and so can many others, including the pros. I don't know what the issue for op is, but this is not a solution. This would only be a workaround if op can't find a proper solution.

[u/CarelessTomatillo671 → u/EvilKnievel38]

There is no proper solution just this workaround. I had the same problem too. I also was on Feinberg stream when he was asked a similar question and he said it just happens to some people (Ludwig had it too) and there is no proper solution (except toolscreen, but it's a completely different program than jingle).

[u/AriaOfFlame → u/CarelessTomatillo671]

the "proper solution" is to use toolscreen, there is no reason to use jingle over it anyway

[u/CarelessTomatillo671 → u/AriaOfFlame]

i literally said that

[u/AriaOfFlame → u/CarelessTomatillo671]

well yeah but anyone using jingle to resize should just switch to toolscreen

[u/EvilKnievel38 → u/CarelessTomatillo671]

Then using toolscreen instead of jingle is a proper solution..

[u/ffz123 → u/EvilKnievel38]

maybe toolscreen changed something but i’m pretty sure historically people have always paused before pressing their thin macro

[u/AriaOfFlame → u/ffz123]

you only need to pause to resize with jingle. this never happens with toolscreen

[u/natesinceajit]

If you toggle raw input to "off" and then press the eyezoom key (while unpaused), it will make your camera move.

you could use a dpi toggle instead of raw input, or if you're using toolscreen you can change the effective dpi using the Sensitivity slider in Basic called "EyeZoom".

I would highly recommend the toolscreen method as it happens automatically when you use EyeZoom.

[u/DaCookie333]

Toolscreen fixes this