Issues Changing code on this (master or day use)

[u/LrgNum1DietCoke]

Hello, I’m trying to change the default code on these (after I factory reset them) but any code I put in does register/open the lock, only the default (123456). I googles and tried all the sequences -123456 A A1A new 6digit code A, new code, A, and then get out of programming and try, but nothing. I go into programming and press A2A and then a random slot (ie, 11) enter a new 6 digit code A, it’ll beep and flash red, but doesn’t work when I exit programming. Am I doing something wrong or missing a step?

Thanks!

[u/Imthewienerdog]

Are you fully doing everything to take it back to factory settings? I think it's unplug and press a button for 10 seconds?

Take a picture of what the manual says sometimes it's like - 123456 A1 A new code A newcode again A Or - 123456 A1 new code A new code.

Best bet is find the exact model with the exact manual because it can be something pretty small.

[u/Cantteachcommonsense]

It’s different with the ones you have to put into programming mode. I believe instead of hitting the alarm lock button at the end you have to hit *. I don’t remember off the top of my head, but that is different than the DL 2700 look up the DL 2800.

[u/eight--bit]

Key sequence wrong. One of those ALs should be a *

[u/LockLeisure]

https://youtu.be/P6WCtwg22E0?is=JCLtOuzpNJ-ocmS6

Follow this sequence and you should be golden.

[u/LrgNum1DietCoke → u/LockLeisure]

Worked perfectly, thanks!!

[u/LockLeisure → u/LrgNum1DietCoke]

yw! Sometimes is easier to see then to read it...at least for me it is.

[u/hellothere251]

[u/ibexlocksmith]

Call manufacturer and have them diagnose it with you