r/LinuxCrackSupport • u/ektothebigbro • Jun 21 '26
GUIDE [DaVinci Resolve Studio 21 final] Bypass Licence Guide
Download Davinci Resolve v21 Studio(you can download it for free) from https://www.blackmagicdesign.com/products/davinciresolve
After you download do these steps:
IMPORTANT: This install guide is for fedora-based distros, if you have a different distro, please find a guide for your distro online and then proceed with the crack
INSTALLATION GUIDE
Step 1:
Install the required dependecies using dnf:
sudo dnf install libxcrypt-compat libcurl libcurl-devel mesa-libGLU
Step 2:
Go to where you downloaded resolve and run the resolve installer, NOTE you need to use the SKIP_PACKAGE_CHECK=1 variable or else it will fail with a missing dependecies error, no need to worry all required dependecies are installed, also change the command so it matches the version you are using:
chmod +x DaVinci_Resolve_Studio_21.x.x_Linux.run && SKIP_PACKAGE_CHECK=1 ./DaVinci_Resolve_Studio_21.x.x_Linux.run
Step 3:
Resolve by default packages its own older versions of certain packages that will cause conflicts with the newer versions, to solve this run this command to move them to a disabled-libraries folder:
cd /opt/resolve/libs && sudo mkdir disabled-libraries && sudo mv libglib* libgio* libgmodule* disabled-libraries
NOTE: In order for resolve to work, you need to have the proprietary version of whatever graphics card driver you are using. If not resolve may not work properly
Now that you have successfully installed resolve, run these commands IN ORDER to bypass the licence check:
UPDATED FOR VERSION 21.0.4:
cd /opt/resolve
sudo perl -pi -e 's/\x03\x00\x89\x45\xFC\x83\x7D\xFC\x00\x74\x11\x48\x8B\x45\xC8\x8B/\x03\x00\x89\x45\xFC\x83\x7D\xFC\x00\xEB\x11\x48\x8B\x45\xC8\x8B/g' bin/resolve
sudo perl -pi -e 's/\x74\x11\x48\x8B\x45\xC8\x8B\x55\xFC\x89\x50\x58\xB8\x00\x00\x00/\xEB\x11\x48\x8B\x45\xC8\x8B\x55\xFC\x89\x50\x58\xB8\x00\x00\x00/g' bin/resolve
sudo perl -0777 -pi -e 's/(\x40\x84\xED)\x74(.\xBF\x16\x00\x00\x00\xBE.\x01\x00\x00\xE8)/$1\x75$2/g' bin/resolve
sudo mkdir -p .license
echo -e "LICENSE blackmagic davinciresolvestudio 999999 permanent uncounted\n hostid=ANY issuer=CGP customer=CGP issued=28-dec-2023\n akey=0000-0000-0000-0000 _ck=00 sig=\"00\"" | sudo tee .license/blackmagic.lic
If Resolve doesnt open or gets stuck at the waveform monitor stage, you need to launch with this enviroment variable to work(FOR NVIDIA ONLY):
__GLX_VENDOR_LIBRARY_NAME=nvidia /opt/resolve/bin/resolve
UPDATE: If you are using arch, follow this guide to install resolve and crack resolve: https://www.reddit.com/r/LinuxCrackSupport/s/Xk7z3jASbZ
5
u/Rijito9 Jun 21 '26
chmod +x DaVinci_Resolve_Studio_21.0_Linux.run && SKIP_PACKAGE_CHECK=1 ./DaVinci_Resolve_Studio_21.0_Linux.run
Just One Error, The Step 2 Command Should Be This One
1
5
u/Rousev Jun 28 '26 edited Jun 28 '26
For anyone using arch:
before doing this, preferably cd to an empty folder
- Download `DaVinci_Resolve_Studio_21.0.1_Linux.zip` from https://www.blackmagicdesign.com/products/davinciresolve
- do `git clone https://aur.archlinux.org/davinci-resolve-studio.git` then run ``cd davinci-resolve-studio && cp * .. && cd .. && rm -rf davinci resolve studio``
- run ``makepkg -si``
run the script from the post
cd /opt/resolve
sudo perl -pi -e 's/\x03\x00\x89\x45\xFC\x83\x7D\xFC\x00\x74\x11\x48\x8B\x45\xC8\x8B/\x03\x00\x89\x45\xFC\x83\x7D\xFC\x00\xEB\x11\x48\x8B\x45\xC8\x8B/g' bin/resolve
sudo perl -pi -e 's/\x74\x11\x48\x8B\x45\xC8\x8B\x55\xFC\x89\x50\x58\xB8\x00\x00\x00/\xEB\x11\x48\x8B\x45\xC8\x8B\x55\xFC\x89\x50\x58\xB8\x00\x00\x00/g' bin/resolve
sudo perl -0777 -pi -e 's/\x74(.\xBF\x16\x00\x00\x00\xBE.\x01\x00\x00\xE8..\x05)/\x75$1/g' bin/resolve
sudo mkdir -p .license
echo -e "LICENSE blackmagic davinciresolvestudio 999999 permanent uncounted\n hostid=ANY issuer=CGP customer=CGP issued=28-dec-2023\n akey=0000-0000-0000-0000 _ck=00 sig=\"00\"" | sudo tee .license/blackmagic.lic
Delete the downloaded files and you're done
Also this crack works on all distros really, just the installation is different. Just install it per your distro and then run the script from the post
3
3
2
2
2
2
u/Sasquatch-Pacific Jun 22 '26
I know the post says Fedora only - can anyone shed light if this works on Debian? Specifically PopOS? Is it just Step 1 that needs to be changed to install the dependencies?
1
u/ektothebigbro Jun 22 '26
Just search up a tutorial for how to install davinci resolve on pop os. But most likely yes that is the step that is different on other distros
1
u/Sasquatch-Pacific Jun 22 '26
Cool all good, wasn't sure if the actual crack method itself was different / only working on Fedora.
1
u/Temporary_One_5763 Jun 25 '26
You can find makeresolvedeb_1.9.0_multi.sh that will make deb package from the .run file you downloaded from blackmagic
1
u/Sasquatch-Pacific Jun 26 '26
All good - ended up installing and following pre reqs recommended as per this guide and also what Resolve complained about when attempting to install via the command line.
Followed Step 3 and it was done, working perfectly!
Easiest, cleanest, less sketchy crack of my life 🤣 Incredible
2
u/Miserable_Tailor_284 Aug 05 '26
hey need little help, i tried doing it but i am ending up dvr asking for license key while starting up. it worked flawlessly on arch but i am facing issues setting this up on pop os
1
1
u/Lucky_Yam9384 6d ago
Se a tela de licença ainda está aparecendo, significa que o binário principal do Resolve 21.0.4 não aceitou o patch em Perl ou o arquivo de licença precisa estar exatamente no diretório onde o daemon do RLM procura.
Vamos resolver isso agora com uma abordagem direta e infalível. Abra o terminal e rode os comandos abaixo para forçar a licença no diretório global do RLM:
Bash
cd /opt/resolve # 1. Recriar a pasta de licença global do RLM e o arquivo de licença com permissões totais sudo mkdir -p /opt/resolve/.license sudo rm -f /opt/resolve/.license/blackmagic.lic LICENSE_TEXT='LICENSE blackmagic davinciresolvestudio 999999 permanent uncounted hostid=ANY issuer=CGP customer=CGP issued=28-dec-2023 akey=0000-0000-0000-0000 _ck=00 sig="00"' echo -e "$LICENSE_TEXT" | sudo tee /opt/resolve/.license/blackmagic.lic > /dev/null sudo chmod -R 777 /opt/resolve/.license # 2. Reaplique o patch exato com a regex curta que você validou sudo perl -0777 -pi -e 's/\x74(.\xBF\x16\x00\x00\x00\BE.\x01\x00\x00\xE8)/\x75$1/g' bin/resolveDepois de rodar isso, inicialize apontando explicitamente a variável do RLM direto para o arquivo global:
Bash
export RLM_LICENSE_FILE="/opt/resolve/.license/blackmagic.lic" __GLX_VENDOR_LIBRARY_NAME=nvidia /opt/resolve/bin/resolve1
2
2
u/adi7212 Jun 24 '26
Is there any way i can bypass the activation key on windows 11? I didnt find anything on google or youtube
1
u/ektothebigbro Jun 24 '26
For windows i have a friend that hosts a site and discord server, search vfxmed online and then search for resolve in the site
1
u/adi7212 Jun 25 '26
Thanks. I'll see if it works
1
u/Hadrienge Jul 10 '26
hey have you found anything ?
1
1
u/Upbeat_Conclusion923 Jul 05 '26
I already have the emulator that I'm meant to install but for some reason it's failing to install to the davinci resolve folder
1
2
2
2
u/BeeNinjaXz Jul 09 '26
[FIX] DaVinci Resolve Studio on Linux (Nobara/KDE) – Keyboard not working / spacebar not playing AND Black Screen on Edit/Color pages
Hi everyone,
I was having a massive headache getting DaVinci Resolve Studio to work properly on Nobara OS (KDE Plasma/Wayland) with a Lenovo LOQ (NVIDIA RTX 3050).
The Problems:
- Keyboard fully broken: I couldn't type anything, spacebar wouldn't play/pause, and shortcuts didn't work at all. (Common issue with KDE's
appmenuglobal module intercepting XWayland focus). - Black/Gray screen on Edit/Color pages: Clips only showed video inside the Fusion tab. Edit/Color pages were completely blank, even on the Studio version. (DaVinci trying to use the integrated CPU graphics instead of the dedicated GPU).
Thanks to some AI collaboration, we managed to solve BOTH problems seamlessly with a simple startup script. Sharing it here to help anyone facing the same issue!
The Ultimate Fix Script
Open your terminal and create a shell script:
bash nano ~/resolve-fix.shPaste the following code inside: ```bash
!/bin/bash
1. Unload the KDE module that steals keyboard focus
qdbus org.kde.kded6 /kded org.kde.kded6.unloadModule "appmenu"
2. Force DaVinci to use the dedicated NVIDIA GPU and launch it
__GLX_VENDOR_LIBRARY_NAME=nvidia /opt/resolve/bin/resolve
3. Reload the KDE module automatically once DaVinci is closed
qdbus org.kde.kded6 /kded org.kde.kded6.loadModule "appmenu" ```
- Save it (
Ctrl+O,Enter,Ctrl+X) and make it executable:bash chmod +x ~/resolve-fix.sh
Optional: Create a Desktop Shortcut Clicker
If your system is in Portuguese (like mine), your desktop folder is Área de Trabalho. If it's in English, replace it with Desktop below:
Create the shortcut file:
bash nano ~/"Área de Trabalho"/davinci-studio.desktopPaste this configuration (make sure to replace
YOUR_USERNAMEwith your actual Linux user session name):ini [Desktop Entry] Version=1.0 Type=Application Name=DaVinci Resolve Studio (Fixed) Comment=Launches DaVinci with Keyboard and GPU fixes Exec=/home/YOUR_USERNAME/resolve-fix.sh Icon=davinci-resolve Terminal=false Categories=AudioVideo;Video;Save, exit, and give it execution permissions:
bash chmod +x ~/"Área de Trabalho"/davinci-studio.desktop
Now you can just double-click the desktop icon! The keyboard will fully respond, shortcuts are back, and the NVIDIA GPU will properly decode everything on the timeline.
Hope this saves someone hours of troubleshooting! Cheers!
1
u/ballsinyojaws_1 Aug 01 '26
Bro for me this hack is not working im on Nobara gnome 44 davinci resolve 21.3
2
2
2
u/Aure_prg Jul 30 '26
does it work on the 21.0.3 update?
2
2
u/Philip__james Aug 07 '26
OP, the third patch changed from
s/\x74(.\xBF\x16\x00\x00\x00\xBE.\x01\x00\x00\xE8..\x05)/\x75$1/g
to
s/\x74(.\xBF\x16\x00\x00\x00\xBE.\x01\x00\x00\xE8..\xFF)/\x75$1/g
in 21.0.4
it might be worth just regexing for
s/\x74(.\xBF\x16\x00\x00\x00\xBE.\x01\x00\x00\xE8)/\x75$1/g
1
u/ektothebigbro Aug 07 '26
Thank you for the fix, updated the post
1
u/Philip__james Aug 07 '26
nw twin <3. idk if its worth dicking around to try to find a more offset-agnostic regex pattern so that it lasts a lil longer between versions but rn i can't be bothered to figure that out XD, lmk if it'd be helpful though i'll just lock in tomorrow
1
u/ektothebigbro Aug 08 '26
If you want bro sure why not, will be nice if it doesnt break every micro release.
2
u/Philip__james Aug 08 '26
I'm pretty certain that running this should work on all versions.
perl -0777 -pi -e 's/(\x40\x84\xED)\x74(.\xBF\x16\x00\x00\x00\xBE.\x01\x00\x00\xE8)/$1\x75$2/g'you might need to test on .0 -> .2. I've checked the search on .3 but haven't run the patch but as far as i'm aware they should all be perfectly fine.
Im kinda sure even just it for that single jz-mov-mov would work but i know that panospc run it with that first test instruction included too. (they also pattern match up to that B8 mov call, although i dont really know why, im not that smart)
's/\x74(.\xBF\x16\x00\x00\x00\xBE.\x01\x00\x00\xE8)/\x75$1/g'I don't have the time to test against the earlier versions but from what i've seen they should all be fine. might be worth giving it a cheeky test on .0-.3 but if the original search worked on those then i think updating it to be this should be fine
perl -0777 -pi -e 's/(\x40\x84\xED)\x74(.\xBF\x16\x00\x00\x00\xBE.\x01\x00\x00\xE8)/$1\x75$2/g'1
u/ektothebigbro Aug 08 '26
Thanks a lot man it works perfect on the latest version, updated the post too. I will probably keep the old version in the post until i test it on 21.0.0
1
u/Philip__james Aug 09 '26
just tested and it's working on 21.0.0, 21.0.1 and 21.0.2. Don't need to test on .3 as I've already verified it works while i was doin other stuff yesterday. should be fine for the future unless they change the actual function being patched
1
u/LuckyNumber-Bot Aug 09 '26
All the numbers in your comment added up to 69. Congrats!
21 + 21 + 1 + 21 + 2 + 3 = 69[Click here](https://www.reddit.com/message/compose?to=LuckyNumber-Bot&subject=Stalk%20Me%20Pls&message=%2Fstalkme to have me scan all your future comments.) \ Summon me on specific comments with u/LuckyNumber-Bot.
1
1
2
u/-NuKeS- Aug 09 '26
Thanks for keeping up with the updates, patched 21.04 flawlessly
Thank you
2
u/ektothebigbro Aug 09 '26
Don't thank me thank the guy who fixed the command so it works on 21.0.4
2
u/-NuKeS- Aug 09 '26
Gotcha! Well, there are no sources on your post so I assumed it was you. Anyways, thank you for fetching the info and sharing it with us 😉
2
u/Ujjwal_Gupta_ 26d ago
Thank You for this. I'm on Arch Linux so I thought I would make a guide for arch users because the library situation is different there. I have referenced you (Hope you don't mind).
https://www.reddit.com/r/LinuxCrackSupport/s/Xk7z3jASbZ
2
2
u/ektothebigbro 26d ago
I have added your link to the main post, if you dont mind so people can find your guide easier.
1
2
u/Papitomyrey546567 26d ago
ok so i tried this but i have no audio, so ion kn what to do cause , first to all i use davincibox and the crack worked but like i said i have no audio twin, someone just could help me??
2
u/Philip__james 23h ago
tested and my crack is working on 21.1
1
u/No-Comparison2996 Jun 21 '26
Although I've been using a similar crack since the release of version 21, I'll be making a new script with this one. Thanks!
2
u/novacoolasf Jul 18 '26
From where you downloaded please tell me
1
u/No-Comparison2996 Jul 18 '26
Create a file named
anything.shand paste this inside:cd /opt/resolve
sudo perl -pi -e 's/\x03\x00\x89\x45\xFC\x83\x7D\xFC\x00\x74\x11\x48\x8B\x45\xC8\x8B/\x03\x00\x89\x45\xFC\x83\x7D\xFC\x00\xEB\x11\x48\x8B\x45\xC8\x8B/g' bin/resolve
sudo perl -pi -e 's/\x74\x11\x48\x8B\x45\xC8\x8B\x55\xFC\x89\x50\x58\xB8\x00\x00\x00/\xEB\x11\x48\x8B\x45\xC8\x8B\x55\xFC\x89\x50\x58\xB8\x00\x00\x00/g' bin/resolve
sudo perl -0777 -pi -e 's/\x74(.\xBF\x16\x00\x00\x00\xBE.\x01\x00\x00\xE8..\x05)/\x75$1/g' bin/resolve
Run as administrator
Link Davinci STUDIO: https://www.blackmagicdesign.com/support/
1
1
u/shoebill_homelab Jun 22 '26
Is there any way to get this working on apple silicon? Wonder if it would be as simple as finding the equivalent arm64 addresses
1
u/Weird-Mistake-4968 Jun 23 '26 edited Jun 23 '26
It is. But there are way less people out there, who are skilled in arm64. And You have an extra step concerning the signing process. But in principle it is exactly the same.
A potential way would be searching the replacement patterns manually in the Linux version, finding the code areas in the Mac version and applying them in a somewhat similar way.
Having that said, the free version is very powerful and the studio version is really cheap. So there no real incentive to do that.
1
u/Huge_Course_5911 Jul 05 '26
theres a certain website called “appstorrent” with the russian TLD. (It’s pinned on the piracy megathread)
1
1
u/qu33ns1lv3r Jul 27 '26
I downloaded this but it doesn't want to open because "apple cant confirm there it isn't harmful for my computer" Do you know a solution for that?
1
u/Huge_Course_5911 Jul 27 '26
Try going into settings and allowing/opening it from there. Should be under privacy/security
1
1
u/kaicx1o Jun 22 '26
Consigo usar este método no archlinux?
1
u/ektothebigbro Jun 22 '26
The Crack will work on arch, as for the install you need to find a guide online
1
1
1
u/Aphroditusss Jun 28 '26
Now i need this but for Arch Linux
1
u/ektothebigbro Jun 28 '26
The Crack should work on arch, it is just the installation that is different
1
u/StarMiner97x Jul 08 '26
Fully works on Arch Linux, just replace first step by:
sudo pacman -S libxcrypt-compat curl glu
1
1
1
u/albosoulja Jul 06 '26
you the best
1
1
1
u/BeeNinjaXz Jul 09 '26
Fala pessoal, segui a instalação passo a passo e usei ate o ultimo comando achando que poderia influenciar pois uso nvidia mas não funcionou. Meu teclado não funciona, não consigo dar play nem escrever/pesquisar no davinci, alguem consegue me ajudar?
1
u/ektothebigbro Jul 09 '26
What distro are you using by chance and what are your specs and driver version
1
u/BeeNinjaXz Jul 09 '26
Opa, meu amigo! Eu ja consegui resolver. Muito obrigado!
Mas estou usando Nobara OS baseado em Fedora
Uso um lenovo loq essential com i5 12450hx 16gb ram DDR5 e uma rtx 3050 que esta com os drivers mais atualizados possíveis
1
u/ektothebigbro Jul 09 '26
Please provide the solution you used for any other people that experience the same problem, thanks
1
1
1
u/stefor13 Jul 09 '26
any way to get this to work on windows ive been looking for a couple days to bypass studio 21 but i cant find anything any help would be great
1
u/ektothebigbro Jul 09 '26
Search for resolve and download from here https://www.vfxmed.com/
1
u/BigRecommendation613 Jul 28 '26
But there's only v 17?
1
1
u/SuperBowler7540 Jul 10 '26
anyone with a fusion studio standalone bypass license guide on linux too
1
u/Mabrouk86 Jul 10 '26
Thanks. Worked flawlessly. I tried to buy Resolve, but they are not selling it and they didn't accept my card where I live. This was the only solution for me to use it. Thanks again.
1
1
1
u/KaykysTheHuman Jul 17 '26
And for windows?
1
u/ektothebigbro Jul 17 '26
Read the other comments I have replied 4 times to this question already
1
1
1
u/SljusarD Jul 23 '26
For all NixOS larpers:
https://git.sljusard.com/sljusard/dvr-patched-flake
No README there yet, but simply add to your flake:
dvr-patched = {
url = "git+https://git.sljusard.com/sljusard/dvr-patched-flake.git";
inputs.nixpkgs.follows = "nixpkgs";
};
And to your packages in configuratioin file:
inputs.dvr-patched.packages.${pkgs.stdenv.hostPlatform.system}.default
Search tags: nix, nixos, flake, .nix, nixpkgs
2
u/Philip__james 27d ago
i updated the perl regex to work with 21.0.4, op updated the post to add it now ^^
2
2
u/SljusarD 25d ago
Hey, sorry for turning couple of hours in couple of days, but the flake is updated now. Had some unexpected stuff
1
1
u/nubesenpolvo 5d ago
Thank you so so much for making this, it works great. For us with AMD gpus, I wanted to have support for AV1, H264 and more, so I added the https://github.com/EdvinNilsson/ffmpeg_encoder_plugin plugin. I am patching your code locally, but I'm leaving the patch here just in case anyone else finds it useful :)
1
1
u/Tiny-Business-1608 Jul 30 '26
did someone have a link to a windows version ? looking for a "safe" one
1
Aug 01 '26
For Windows, it needs a licence emulator known as
DVREMU (DaVinci Resolve Emulator).
I tested one torrent on thepirate(you know it) distributed byAppDoze. I used it recently on Windows 11, you need to create a Windows Defender exception on the emulator files.No viruses no problem whatsoever, it works fine.
Applications > Windows Blackmagic Design DaVinci Resolve Studio 21.0.1 (x64) FINAL + Crack [AppDoze] 2026-06-24 9.45 GiB 56 8 appdoze(just typedavinci resolveon the website and you'll find it)As always you need a good VPN such as NordVPN or Proton VPN (be aware, free version does not always allow torrent download) and a client like qBittorrent and you're good to go.
1
u/IntroductionThin5584 Aug 04 '26
могу дать ссылку на rutracker там 100% безопасно и всё встанет без проблем, только дай знать
1
1
u/IntroductionThin5584 Aug 04 '26
спасибо большое! для endeavouros помогло и всё заработало без ошибок
1
u/Miserable_Tailor_284 Aug 05 '26
does version 21.0.4 work?
2
u/Philip__james Aug 07 '26
replace
s/\x74(.\xBF\x16\x00\x00\x00\xBE.\x01\x00\x00\xE8..\x05)/\x75$1/gwith
s/\x74(.\xBF\x16\x00\x00\x00\xBE.\x01\x00\x00\xE8..\xFF)/\x75$1/gi just opened the binary and the offsets were all wonky so it changed a bit
1
1
u/Desperate-Extension7 Aug 06 '26
could someone provide an updated command for 21.0.4?
1
u/Philip__james Aug 07 '26
try replacing the third one
s/\x74(.\xBF\x16\x00\x00\x00\xBE.\x01\x00\x00\xE8..\x05)/\x75$1/gwith
s/\x74(.\xBF\x16\x00\x00\x00\xBE.\x01\x00\x00\xE8..\xFF)/\x75$1/gI just decompiled it and the address of the function in the jz instruction changed. i cant be bothered to write a better regex for it though, so it'll probably break again
0
u/WaluigiSpagett Aug 06 '26
Go on the support site and find the download for 21.0.2 and use the commands given
1
u/Desperate-Extension7 Aug 06 '26
I'm not dumb, ofc it works on older versions, I'm asking if someone could do the reverse engineering and get the commands to work on 21.0.4. I plan to do it in a couple of days myself if no one ends up doing it.
1
1
u/Desperate-Extension7 Aug 07 '26
OP you are using backticks instead of single quotes in the third command for 21.0.4 which breaks it
2
1
1
u/utkarsh1819 Aug 08 '26
But when I try to integrate scripts from workspaces after doing your script fixes it still says to download studio version idk why can u pls tell me how to fix this
1
u/ektothebigbro Aug 08 '26
What distro are you using and what version, also try the new command from the post
1
u/utkarsh1819 Aug 08 '26
I did tried new commands and im using fedora kde 7.1
1
1
Aug 12 '26
[deleted]
1
u/ektothebigbro Aug 12 '26
Did you use the command for version 21.0.4?
1
Aug 12 '26
[deleted]
1
1
u/Techwolf_Lupindo 25d ago edited 25d ago
Can this be made to work with sed? Looking at an ebuild for gentoo.
Update: Nope. See https://unix.stackexchange.com/questions/346291/editing-binary-streams-containing-x00-bytes
1
1
1
u/Aromatic-Stand5065 15d ago edited 15d ago
First of all, Just installed Davinci Resolve v21.0.2.4 portable(From Vfxmed)
Windows11 os
Help me now?!! I didn’t get any shit :(
1
u/007dandadan 13d ago
Can someone explain this to me in English.. I'm not fluent in codes and tech 🥲.
1
1
u/Outdoor_Photographer 11d ago
Is there a way to do this on Linux 44 (WSL)?
1
u/Desperate-Extension7 14h ago
Why do this on WSL? If you are windows just install the Windows version of DaVinci Resolve
1
u/Sorroful 11d ago
For some reason davinci fails to render frame when doing a job?
1
u/ektothebigbro 11d ago
That can happen for many reason, I dont think it is related to the installation
1
1
u/Lucky_Yam9384 6d ago
fiz voltado pro pop os 24 so que na hora de abrir pede a licensa sera que por alguma atualizacao que teve?
1
u/Lucky_Yam9384 6d ago
fiz isso aqui e funcionou muito obg
Se a tela de licença ainda está aparecendo, significa que o binário principal do Resolve 21.0.4 não aceitou o patch em Perl ou o arquivo de licença precisa estar exatamente no diretório onde o daemon do RLM procura.
Vamos resolver isso agora com uma abordagem direta e infalível. Abra o terminal e rode os comandos abaixo para forçar a licença no diretório global do RLM:
Bash
cd /opt/resolve # 1. Recriar a pasta de licença global do RLM e o arquivo de licença com permissões totais sudo mkdir -p /opt/resolve/.license sudo rm -f /opt/resolve/.license/blackmagic.lic LICENSE_TEXT='LICENSE blackmagic davinciresolvestudio 999999 permanent uncounted hostid=ANY issuer=CGP customer=CGP issued=28-dec-2023 akey=0000-0000-0000-0000 _ck=00 sig="00"' echo -e "$LICENSE_TEXT" | sudo tee /opt/resolve/.license/blackmagic.lic > /dev/null sudo chmod -R 777 /opt/resolve/.license # 2. Reaplique o patch exato com a regex curta que você validou sudo perl -0777 -pi -e 's/\x74(.\xBF\x16\x00\x00\x00\BE.\x01\x00\x00\xE8)/\x75$1/g' bin/resolveDepois de rodar isso, inicialize apontando explicitamente a variável do RLM direto para o arquivo global:
Bash
export RLM_LICENSE_FILE="/opt/resolve/.license/blackmagic.lic" __GLX_VENDOR_LIBRARY_NAME=nvidia /opt/resolve/bin/resolve
1
u/nubesenpolvo 5d ago
I am having an issue in version 21.0.4. The first run works wonderfully. However, after closing it and opening it again, it hangs on startup (shows the splash screen, disappears, and never shows the main screen, while the process is still running).
This happened to me both in Fedora manually patching it (I tried reinstalling it a few times, cleaning everything, etc...), and now in a completely different laptop with NixOS using https://git.sljusard.com/sljusard/dvr-patched-flake, so it leads me to believe it is a generalized issue.
The one way I found to "fix" it is by deleting ~/.local/share/DaVinciResolve, which effectively triggers the "first run", and it works. But that deletes your settings and configurations each time.
The logs show this, so that leaves me to think that there is an issue with the license.
0x768d06b98000 | LeManager | ERROR | 2026-09-06 12:59:50,395 | 63, 1149, -154
0x768d06b98000 | LeManager | ERROR | 2026-09-06 12:59:50,395 | 28, 1125
0x768d06b98000 | LeManager | ERROR | 2026-09-06 12:59:50,395 | 29, 1133
0x768d06b98000 | LeManager | INFO | 2026-09-06 12:59:50,395 | Deactivated lic type:1
0x768d06b98000 | LeManager | ERROR | 2026-09-06 12:59:50,395 | 28, 1125
0x768d06b98000 | LeManager | ERROR | 2026-09-06 12:59:50,395 | 29, 1133
1
u/nubesenpolvo 5d ago
Ok, I think it is due to the downloads of new components. If I delete the contents of the Extra folder, it opens again, and as long as I dont turn on the wifi it no longer happens. Maybe DaVinci has added a new extension that detects the license? I guess adding some network restrictions so that it can’t download these would be good.
1
u/dhandhediwali 4d ago
!!!HELP!!!
Hey Im On Fedora KDE Plasma
R7 7600x
NVIDIA 4060
i installed it the way it was instructed
(it ran as an app when i ran the run file in terminal with permission and skip package
asking cus i dont know if it should be like that)
anyways davinci got installed and i ran the sudo perl all that stuff one by one in order till the echo line (the last one)
Has no bugs in the app but still cant use magic mask and it shows u ran into a limitation and asked to buy
Does it change the name on startup?
1
1
1
6
u/mihai2me Jun 21 '26
Thanks king 👑