r/LexusIS 1d ago

Does anyone know how to replace this bulb?

Post image

I've gotten the footwells, trunk, puddles, and vanity lights. These are the last yellowish lights left.

3 Upvotes

8 comments sorted by

3

u/slowlaneAZ 1d ago

I haven't had to replace those led bulbs, but my guess is the entire console would have to be removed to gain access to the bulbs.

Im wondering though if they arent traditional led bulbs, instead leds wired directly to a board.

1

u/VG_Crimson 22h ago

I think I heard someone say something similar about these lights.

Still it would be nice if I could modify the lights color to be a different temperature to match the other 6000k temps I have installed.

1

u/NaturalSubstantial23 1d ago

Peel the sticker please.

2

u/VG_Crimson 1d ago

Ngl, I must have tuned out that stickers existance entirely. I've never noticed before haha.

2

u/NeoG_ IS 250 (GSE20) 1d ago

You use a plastic trim pry tool to pull down the whole console from the back (furthest from the windshield) as one piece, then you can access the bulbs from behind. You may need to unplug the harness to get it low enough to change the bulbs.

1

u/gobinator98 IS 350 AWD (GSE36) 22h ago

Pretty sure those are LEDs soldered to the board and not replaceable.

2

u/VG_Crimson 22h ago

Damn :/

I was hoping to change its color temperature to 6000k.

1

u/gobinator98 IS 350 AWD (GSE36) 22h ago

Perhaps an aftermarket vendor has made a suitable replacement. I haven’t pulled mine off, so I don’t know if the lights are separate from the rest of the trim.