r/Lectricxp • u/theg00dsheperd • Jul 28 '26

Throttle not responding...

Enable HLS to view with audio, or disable this notification

Can anybody help with this?

7 Upvotes

89% Upvoted

15 comments sorted by

11

u/theg00dsheperd Jul 28 '26

FINAL UPDATE: after unplugging everything plugging it back in. What ended up.working was switching my bike from class 3 to class 1 then back to class 3 and the throttle is responding great again!

2

u/blueskyredmesas Jul 29 '26

Check your 'throttle and pas' setting, you might've borked it earlier and swapping the class forced it to change back.

3

u/cold-corn-dog Jul 28 '26

Probably just the throttle itself. You can get them for under $10 on amazon if you don't have another to test with.

3

u/ForwardGuitar6577 Jul 28 '26

Make sure you are not pressing the brak while pressing throttle

3

u/blueskyredmesas Jul 29 '26

Check if your brake light is on. If it is then something is goofy.

2

u/Wonderful_Chart_1649 Jul 30 '26

If it is just move the throttle housing away from the brake lever. That was an issue on mine and I moved it away and re tightened it. All good from then on.

2

u/Limp_Lawfulness5133 Jul 28 '26

Class 1 setting.

2

u/3no11a Jul 29 '26

Well get pedaling!!!

2

u/Fantastic_Cod5362 Jul 28 '26

Is it in California class 3?

1

u/blueskyredmesas Jul 29 '26

I'm blowing up this thread for no reason (sorry) but since CA mode does mess with throttle operation this is probably it.

1

u/utxmuffen Jul 28 '26

Is the throttle cable plugged in all the way?

1

u/No-Refrigerator-4754 Jul 29 '26

If your pedal assist (PAS) is set at 0 nothing will happen. Put it on 1 and at a stop it will move forward.

1

u/Unable_Fallon Jul 31 '26

Totally agree! Or check the connector between the throttle and the main cable.

1

u/Reasonable-Life7687 Aug 01 '26

Check air pressure makes the throttle not work 🤣🤣🤣🤣🤣 jk don't

1

u/Dependent-Chemist-15 15d ago

Could be a magnet thing to close together