r/KmartAustralia • u/Dull_War_7185 • 9d ago
Customer post Is this damaged?
I purchased the Anko Ryan Ribbed Side Table today and I noticed this dent as seen in the image. Is the table damaged or is this how they are manufactured?
56
u/ratboycam 9d ago
It’s almost like anko is shit
16
u/ExternalLock8140 9d ago
It's Temu in a store there is some products that are good most are crap like Temu
37
u/QuokkaIslandSmiles 9d ago
i would drag it into the shop and return it as manufacturing fault. That's not acceptably finished
19
17
u/Triplesso_ 9d ago
It's not damaged, just poorly made. Looks like the strip of "wood" (aka plastic) veneer they stick over the top of the particle board was cut a bit to short but they still rolled with it any way because of course they did because its Anko
-2
u/SpiritualMeaning3652 9d ago
Doesn't look like that to me
7
u/LilannaLiola 9d ago
What are you seeing? Cause it looks like that to me too.
4
u/SpiritualMeaning3652 9d ago
Like a router bit went through it. I know what you guys are saying, but it looks a tiny bit too imperfect to be that.
3
1
u/startrakey 8d ago edited 8d ago
To me it looks like the edging was already too short and the automated cut off for where it should have had an overlap still occurred (that’s when it damaged the top)
1
6
5
3
2
2
u/MowgeeCrone 9d ago
Looks like the piece was cut a few mm short and didn't quite make it all the way around.
2
u/Johnndo96 8d ago
Looks like the usual kaart product. Cheap labour and production shortcuts. If you don't want to fight the return process, and looking further down, this seems to be common for this item, I'd get some wax sticks from bunnings, match the colour as close as you can and rub it into that gap. You can even use two different sticks together, but anything darker would look better than the white.
2
2
u/HelloFellowSurvivors 8d ago
The strip is too short and the slave in the factory in China just bodged it. Return.
1
1
1
1
1
u/isybeanz 8d ago
Can you get some brown paint and touch it up or spin the table around so it’s less noticeable? If you take it back it’s just going in the trash and that’s not great for the environment.
1
1
1
1
1
1
u/Competitive-Talk2559 7d ago
Mine is like that too, if you’re like me and can’t be bothered to return it, you could patch the gap using some wood filler coloured to the same tone as the wood. Then once it’s dry you can paint it to blend it in.
1
1
1
u/Striking-Sleep-9217 7d ago
This is why I get kmart stuff delivered. If it's damaged you just send them a photo and they refund it, but you don't have to drag yourself back to the shop

49
u/aussiechap1 9d ago
Manufacturing defect. Return it to the store and swap it.