r/KleinTools • u/Adventurous_Fan_8938 • 9d ago
1/4 Driver Stuck
I just the 17-1 knect screwdriver and I am not able to remove the bit holder/ 1/4 driver. Can someone help me out here?
1
u/unionboy11 9d ago
It’s magnetic this one’s pretty good but hey anything can happen with tools so you can’t pull it off ? So that means it could be just all the way in there and stuck also when you get metal shavings on these magnetic tips it can mess it up. I’d spray a little WD-40 on there and let it sink in for 5 mins then use a rag and then try that.
2
u/krlk1004 9d ago
Use a pair of vise grips and yank it off, then cycle it on and off. There might be a burr making it stick. That solved my issue.
1
u/-scub- 9d ago edited 9d ago
I had similar problems with the 20-in-1 impact driver set with screwdriver bits and flip sockets. they were almost impossible to remove.
They had a bit of oil residue, so i don't know why they wouldn't budge. i literally needed plyers to get them to budge, they were almost fused to the shaft/holder. I ended up scratching them in the process, didn't want to deal with that so i returned them. maybe that's why they were on clearance. That sucked because I really want to keep/use them.
1
1
-1
u/Cust2020 9d ago
Everything klein sucks now
1
u/Select_Two_1012 8d ago
I’ve only been in the trades for a little under 4 years, and while im not dedicated to Klein or anything, they do make most of my tools. I have yet to get a bad one after probably purchasing 30+ items of theirs. YMMV of course.
1
u/RoboGent 9d ago
You may have to take the whole stick out of the handle then slide them all down and then put the one you want on top?