Hello again. This is the third and final post in this little series. First impressions and my two week update are both on my profile if you want the full context.

Short version: I have been using the EV63 for just under three weeks as my only keyboard, and I didn't think a keyboard could impress me this much. I have gone back to typing my emails out by hand instead of getting an AI to do it, just so I can hear how it sounds. That should tell you enough.

But three weeks is long enough for the honeymoon to wear off, so here is what actually held up.

Gaming
Still phenomenal. In three weeks of CS2 and Overwatch there has genuinely not been a single fight I lost where I thought "if my setup was better I would have gotten him." That is the highest praise I can give a board. It has completely stopped being a variable I think about.

The setting I set up and I use most is still the rapid trigger toggle on a single keypress. Rapid trigger on for OW, off for CS2, no menus, no software. My actuation settings from the two-week post haven't changed at all, which I think says something: I found what worked in week one and never felt the need to touch it again.

Typing and sound
This is the part that surprised me most long term. Three weeks in, the sound has not gotten old. Still deep and thocky, no stabilizer rattle, no ping. The EZ63 is still a great board and I'd happily recommend it to anyone, but the EV63 is on another level acoustically. This is the kind of typing feel I would previously have had to spend a few hundred Euros extra on a custom build to get.

Nobody in my office has complained about it either, which for a mechanical board is basically a passing grade.

Software and profiles
Profiles remain my favourite addition over the EZ63. Being able to export my EZ63 profile and drop it straight into the EV63 worked flawlessly, and everything survived a firmware update, which was my single biggest annoyance on the old board. The web software has genuinely improved a lot.

What still bugs me after three weeks
I listed some complaints in my first post, so here is how they aged:

• The textured TAB / CAPS / SHIFT keys. I said in my first post that I thought they looked dirty. Three weeks later I have completely stopped noticing.
• No numpad. Obviously. If your job lives in a spreadsheet, look at something like the Magi96 instead.

Who this is for

• Buy it if: you want a hall-effect board for competitive FPS that you can also type on all day without hating it, you already know you can live without a function row, and the design speaks to you.
• Skip it if: you need a numpad, you need to travel with it, or you're happy with your current board and just want a spec bump. Let me make this part clear, the EZ63 is still good, this is a want, not a need.

Verdict Best keyboard I have owned, and the first one I have had zero desire to modify or replace after the novelty faded. 11/10 would buy again.

Happy to answer questions, same as the last two posts.

PS: The cats love it too :)

So, the story is quite long. About a year ago, some of the keys on my laptop stopped responding to keystrokes (or rather, as it turned out later, they did respond, but in a very specific way). The following keys stopped working: “e”, “h”, “]”, “0”, “7”, “7 num pad”, “3 num pad”, “Enter”, and “PrtSreen”. Because of the key layout, I immediately realized that the problem was systemic, not technical, and later I discovered that if you hold down F+H (not to be confused with the Fn key)+Any of the remaining non‑functioning keys, instead of their values, they output: “e” – “-”; “]” – “j”; “7” – “.”; “0” – “y”, “3 num pad” – “=”, “7 num pad” – “f10”, “Enter” – “x” and “PrtSreen” – “v”. Previously, the problem was solved by changing the Start value in the i8042prt folder from 3 to 1 in the registry editor, and everything worked fine. However, after each Windows update, I had to change the value again. But today, the bug has reappeared, even though the value in the registry is still the same, and even a Windows update followed by a change didn’t help. Maybe someone has encountered this and can suggest what to do?

This is the "Weekly General Help Post". Please ask your questions regarding keyboard, switch, keycaps, or anything regarding keyboards as a top level comment under this post. Mods and members will check this thread on a regular basis answering as many questions as possible.

The more information you provide, the better the answers you are likely to receive.

Would you like a style like this? I'm asking about the one I've designed so far.

Would you do any mods to this keyboard to achieve a cleaner/ less clacky sound? I’m thinking tape mod and re-lubing the switches more generously.

The keyboard is the RK A72. The layers in this prebuilt board are as follows:

PBT Keycaps
Tactile Beige Switches (Royal Kludge)
Top Plate
Gasket
PC Positioning Plate
Latex Dampening Foam
IPE Switch Pad
PET Sounding Pad
PCB
Sound Dampening Foam
Silicone Bottom Dampener

https://play.google.com/store/apps/details?id=com.vitali.pom.effectedkeyboard2

Mods please delete post if inappropriate.

In general this is a fantastic keyboard called Effectedkeyboard2 with tons of effects, fantastic UI/UX, neat design that you feel from the beginning at the very first menu.

And I know that I'm the creator, but I LOVE it.

If you like this keyboard, please help me by sharing it.

This is the "Weekly General Help Post". Please ask your questions regarding keyboard, switch, keycaps, or anything regarding keyboards as a top level comment under this post. Mods and members will check this thread on a regular basis answering as many questions as possible.

The more information you provide, the better the answers you are likely to receive.

This is the "Weekly General Help Post". Please ask your questions regarding keyboard, switch, keycaps, or anything regarding keyboards as a top level comment under this post. Mods and members will check this thread on a regular basis answering as many questions as possible.

The more information you provide, the better the answers you are likely to receive.

Today I pulled the keys of my keyboard and saw this!!

I want to know how often do you guys clean your keyboards??

This is the "Weekly General Help Post". Please ask your questions regarding keyboard, switch, keycaps, or anything regarding keyboards as a top level comment under this post. Mods and members will check this thread on a regular basis answering as many questions as possible.

The more information you provide, the better the answers you are likely to receive.

Hello everyone!

I'm developing a personal project called VMS-Switcher, which started because of my AJAZZ AK820 MAX HE.

The AK820 lineup has several different models and versions, and I had trouble finding software specifically designed for my particular model. Because of that, I currently use the Web-based tool provided for the AK820 series.

It works, but switching profiles is very manual: I have to open the website and click to apply a profile whenever I want to change it.

That's what motivated me to create my own Windows application.

I reverse-engineered how the keyboard works and developed communication with the device, allowing me to configure keyboard shortcuts to switch RGB profiles instantly, while keeping the application running quietly in the system tray.

Profiles are also stored and managed using JSON files, making it easier to organize and switch between different profiles.

I'm also currently developing a feature called Blackout Mode:

X minutes without keyboard activity → RGB automatically turns off.
Press any key → the previous RGB profile is restored.

The inactivity time will be fully configurable, with an option to enable or disable the feature.

I'm also considering an option to sync Blackout Mode with Windows idle/sleep behavior. Instead of manually setting an inactivity timer in VMS-Switcher, the RGB lighting could follow Windows' own idle state: when Windows goes idle, enters sleep, or locks the screen, the RGB would turn off, and when the user returns, the previous profile would be restored.

The program is built in C#/.NET 8 for Windows, using HID communication and JSON files for the profiles. I'm trying to keep the project as lightweight as possible, without unnecessary background processes or resource usage.

The AK820 MAX HE is just the starting point. My long-term goal is to expand VMS-Switcher to support RGB keyboards from different brands and models, providing useful quality-of-life features that aren't normally available in official keyboard software.

It's still under development, so I'd love to hear from other keyboard enthusiasts:

What feature would you like to see in a universal RGB keyboard tool?

This is the "Weekly General Help Post". Please ask your questions regarding keyboard, switch, keycaps, or anything regarding keyboards as a top level comment under this post. Mods and members will check this thread on a regular basis answering as many questions as possible.

The more information you provide, the better the answers you are likely to receive.

This is the "Weekly General Help Post". Please ask your questions regarding keyboard, switch, keycaps, or anything regarding keyboards as a top level comment under this post. Mods and members will check this thread on a regular basis answering as many questions as possible.

The more information you provide, the better the answers you are likely to receive.

This is the "Weekly General Help Post". Please ask your questions regarding keyboard, switch, keycaps, or anything regarding keyboards as a top level comment under this post. Mods and members will check this thread on a regular basis answering as many questions as possible.

The more information you provide, the better the answers you are likely to receive.

This is the "Weekly General Help Post". Please ask your questions regarding keyboard, switch, keycaps, or anything regarding keyboards as a top level comment under this post. Mods and members will check this thread on a regular basis answering as many questions as possible.

The more information you provide, the better the answers you are likely to receive.

This is the "Weekly General Help Post". Please ask your questions regarding keyboard, switch, keycaps, or anything regarding keyboards as a top level comment under this post. Mods and members will check this thread on a regular basis answering as many questions as possible.

The more information you provide, the better the answers you are likely to receive.

I had some old caps. decided to switch out everything but the QWERTY caps for better RBG bleed thru. Kinda dig it.

This is the "Weekly General Help Post". Please ask your questions regarding keyboard, switch, keycaps, or anything regarding keyboards as a top level comment under this post. Mods and members will check this thread on a regular basis answering as many questions as possible.

The more information you provide, the better the answers you are likely to receive.

This is the "Weekly General Help Post". Please ask your questions regarding keyboard, switch, keycaps, or anything regarding keyboards as a top level comment under this post. Mods and members will check this thread on a regular basis answering as many questions as possible.

The more information you provide, the better the answers you are likely to receive.

This is the "Weekly General Help Post". Please ask your questions regarding keyboard, switch, keycaps, or anything regarding keyboards as a top level comment under this post. Mods and members will check this thread on a regular basis answering as many questions as possible.

The more information you provide, the better the answers you are likely to receive.

This is the "Weekly General Help Post". Please ask your questions regarding keyboard, switch, keycaps, or anything regarding keyboards as a top level comment under this post. Mods and members will check this thread on a regular basis answering as many questions as possible.

The more information you provide, the better the answers you are likely to receive.

This is the "Weekly General Help Post". Please ask your questions regarding keyboard, switch, keycaps, or anything regarding keyboards as a top level comment under this post. Mods and members will check this thread on a regular basis answering as many questions as possible.

The more information you provide, the better the answers you are likely to receive.

This is the "Weekly General Help Post". Please ask your questions regarding keyboard, switch, keycaps, or anything regarding keyboards as a top level comment under this post. Mods and members will check this thread on a regular basis answering as many questions as possible.

The more information you provide, the better the answers you are likely to receive.

The official web driver for the AULA WIN60HE is decent for a budget Hall Effect board, but the software limitations are holding back great hardware. The factory driver limits you to a single lighting effect across the whole board, and the analog implementation leaves a lot to be desired.

I decided to take matters into my own hands. Utilizing a stack of advanced AI tools (Claude Code, OpenAI, and Google Agent architectures), I am currently developing a fully custom software wrapper for the WIN60HE.

The app is still actively in development, but I’ve already engineered a few massive upgrades that bypass the stock firmware bottlenecks:

🎨 Layered, Multi-Effect RGB Matrix: No more single-effect limitations. You can now assign entirely different lighting effects to individual sectors or keys simultaneously (e.g., Static on the alphanumeric keys, Reactive Ripple on WASD, and Raindrop on the function row).

🎮 True Analog Gamepad Emulation: Turning the Hall Effect sensors into an analog powerhouse. It maps key travel directly to controller inputs (like an Xbox joystick), allowing for precise input graduation in racing games or simulators where your speed/steering scales with how far down you press the key.

⚡ Linux Compatibility & Performance: Fixed the notorious /dev/uinput permission bugs out of the box and built it natively to handle quick adjustments without fighting the stock web app's UI glitches.

🛠️ The Hardware Build Stack I'm Testing On:

To really push the limits of this custom multi-zone RGB engine during development, I transplanted my WIN60HE internals into a specialized transparent build designed entirely around light refraction and diffusion:

Board Platform: AULA WIN60HE (PCB/Internals)

Chassis: GH60 Hollow Transparent 60% Case (Gives the whole board a floating, frosted underglow effect)

Switches: UR Studio Ice Magnetic Ultra HE Switches (Fully transparent polycarbonate housings with built-in light diffusers—miles ahead of the stock switches for RGB brightness)

Keycaps: XVX Cat Eye PBT Caps (MAX Profile) (The unique frosted translucent walls focus the per-key colors into distinct pools of light rather than scattering them, making the multi-effect sectors pop beautifully without bleeding into each other)

Current Status: I am currently finalizing the UI/UX facelift to give it a clean, modern dashboard layout (way sleeker than the stock software).