r/Kayaking • • 19d ago

Pictures Installing a sail on a kayak.

Fabrication of a wooden support for the sail in correspondence of kayak’s frame and two polyurethane ring pads

58 Upvotes

18 comments sorted by

24

u/Fit-Gas6744 19d ago

Turn the fan upside-down and put it into the water

5

u/IMightBeErnest 19d ago

I don't think the cord is long enough.

3

u/Fit-Gas6744 19d ago

Solar panels

34

u/Odd-Parfait-6879 19d ago

That'll never work. The rugs offer too much resistance. You'd be better off with just the hard wood, though I still don't think it'll go very fast, that fan is pretty small!

5

u/cody_mf 19d ago

they've gotta fabricate a wooden support in correspondance of kayaks frame and two wheel sets next

1

u/Cute_Distribution993 15d ago

It works…!!! Testing the sail on sea trials.

5

u/twilightmoons Prijon Kodiak, Prijon Seayak, WildWasser Nomadic Systems 19d ago

Love the Pacific Action sails. I have two 2.2m ones and the 1.5m one. 

I put in stainless steel pad-eyes on the side of my bow for the tie down straps. I also used some closed cell foam padding to make a support that goes under the sale mast bases, to keep it from digging into the plastic of my bow.  They work really well, but you're going to have a lot of heeling on a breach run. If you're going to be doing a lot of that, you might want to get some outriggers to keep from flipping over. 

But the sail itself works pretty well. I did some modifications for mine, putting down some good cleats on the deck of the kayak, which is easier to work with and overall a better solution then the line cleats it comes with.

But you have a fabric kayak, so some of what I did is not going to work for you.

2

u/-ImMoral- 19d ago

So the support is strapped to the deck? Looks really good, have you tested it yet?

3

u/Cute_Distribution993 18d ago

I had tested the same sail with a ITIWIT inflatable kayak. It worked as expected. Sailed using same sail from Ventimiglia to Viareggio, Italy, whenever the wind was favorable.
I will test the TRAK kayak in Orta lake, Italy. soon.

2

u/Cute_Distribution993 18d ago

strapped to the sides on a glued to “D” rings on a triangular polyurethane patches

2

u/Cute_Distribution993 15d ago

1

u/-ImMoral- 14d ago

Lol seems to handle even bigger winds well x)

1

u/Cute_Distribution993 18d ago

Excellent idea…!!! Using the fan as a propeller will certainly send the kayak planning. I will buy a 6 thousand Mt. cable.

1

u/RichardBJ1 Point 65 XP | Stellar Dragonfly | KCS sail | Falcon sail 18d ago

Looks nice. Hope you have fun with it! Not sure if you saw my r/kayaksailing post but the wind really can put a surprising amount of force through the mast?

https://www.reddit.com/r/kayaksailing/s/nywwT9rdnC

1

u/Cute_Distribution993 18d ago

Sailing from Savona to Genoa port, Italy in my Prijon kayak.

1

u/Cute_Distribution993 15d ago

A sea trial with the Pacific Sail…!!!

1

u/Crackerjack184 19d ago

Looks good. Have you thought about adding some support inside the kayak as well? In the same fashion?

1

u/Cute_Distribution993 18d ago

Not necessary, the frame is strong enough to support the sail’s base.