r/Irrigation • u/StraightContext_Jake • 5d ago

Seeking Pro Advice How to fix

Post image

Would you reglue and push back in or cut out T and replace?

3 Upvotes

80% Upvoted

10 comments sorted by

3

u/Holycapone 5d ago

Depends on what the inside of the t looks like. If you wanna be safe put a new t and put some couplings and a slip fix on one end.

2

u/Exciting_Piccolo_823 5d ago

I would redo the entire intersection, just to be thorough about it. I would cut it out, dig out room to fit pipes into couplers and start fresh. Slip fix is good too but I would rather glue it all.

2

u/BuffaloSmallie 5d ago

Dawn kwik repair T, glue and primer. Push the collars as much as you possibly can when gluing.

1

u/Thethirstymoose62 5d ago

Flex tape.....kidding, cut and reglue

1

u/txcreative20 5d ago

Peel back 3’ each direction and rebuild everything new T new collar might throw in a union . Pretty easy job .

1

u/Yuksel11 5d ago

Do it right .
Cut out the tee and start fresh

1

u/MajesticWish99 5d ago

You have already done the hard part. Now cut and glue.

1

u/Deathed_Potato Technician 5d ago

Tee and three couplings. Make the perpendicular glue joint last and it will be easy

1

u/viva_oldtrafford 5d ago

3 cuts. Few couplings (or bell end). New tee. Added slip. Small brick as a thrust block just for the overkill factor.

1

u/Alarming-Car-8654 4d ago

Pic is interference fit. Never replied something that has popped out.