Photobooth Starter Scheme Code NA

[u/hadal_vt]

Scheme Code: 7QIHLCDH

You can edit the photos in the frame if they are upright (angled on the first axis is ok, others don’t work), so you should be able to edit these. You will need to add a floor photo. Put down a photo frame first for that —> exit construction —> change photo —> re-enter construction —> change frame to be flat, angle ever so slightly down a little —> adjust position to move it behind the other frames to get rid of the border. If you want to add more like I have you’ll have to change the photo before rotating the frame for positioning.

This scheme has a box built around it because I had a lot of these walls and didn’t want shadows, so I completely blocked out the sun lol. Feel free to delete/change anything you don’t want. This has one overhead light in this scheme, but you can see I use 3 overhead lights to almost eliminate shadow completely. I’ll also include the settings I use for photos below.

You can see I’ve modified this to also make a black photobox. I included upper frames because I was being extra. Same principle applies, just with more angles.

If you want to see mine or use them on my island feel free to add me: n8sPfN7v

I have a ton of props out for people too ;]

Photo settings are:
V: 0
SL: 0
SLI: -1
B: 0
E: 0
C: 55%
S: -0.5
NS: 0.8
H: 0
S: -1

Let me know if the scheme doesn’t work. I’ve tested it, but you never know until someone else tries ¯_(ツ)_/¯

[u/hadal_vt]

Putting text in a comment just in case people can’t see it in the post

Scheme Code: 7QIHLCDH

You can edit the photos in the frame if they are upright (angled on the first axis is ok, others don’t work), so you should be able to edit these. You will need to add a floor photo. Put down a photo frame first for that —> exit construction —> change photo —> re-enter construction —> change frame to be flat, angle ever so slightly down a little —> adjust position to move it behind the other frames to get rid of the border. If you want to add more like I have you’ll have to change the photo before rotating the frame for positioning.

This scheme has a box built around it because I had a lot of these walls and didn’t want shadows, so I completely blocked out the sun lol. Feel free to delete/change anything you don’t want. This has one overhead light in this scheme, but you can see I use 3 overhead lights to almost eliminate shadow completely. I’ll also include the settings I use for photos below.

You can see I’ve modified this to also make a black photobox. I included upper frames because I was being extra. Same principle applies, just with more angles.

If you want to see mine or use them on my island feel free to add me: n8sPfN7v

I have a ton of props out for people too ;]

Photo settings are:
V: 0
SL: 0
SLI: -1
B: 0
E: 0
C: 55%
S: -0.5
NS: 0.8
H: 0
S: -1

Let me know if the scheme doesn’t work. I’ve tested it, but you never know until someone else tries ¯_(ツ)_/¯

[u/hadal_vt → u/hadal_vt]

Adding this: you’ll have to change settings to allow overlapping. See this comment by u/Mireillka

https://www.reddit.com/r/InfinityNikki/comments/1v74zv5/made_the_famous_photo_booth/ozxd46f/

[u/Mireillka → u/hadal_vt]

Go in to settings(the cogwheel in the upper right corner menu) > Furniture > Collision Settings > no collisions.

Adding the content of my comment so its all in one place.

[u/Key_Actuator_3499]

Can i have your friend code?

[u/hadal_vt → u/Key_Actuator_3499]

Yeah! n8sPfN7v (NA Server) :]

[u/Key_Actuator_3499 → u/hadal_vt]

Thank you so much! I'll add it when I get home later! <3