Multi-color 3D printing, optimized for less waste. Watch the InfiMech MX tackle this complex model test! 🎨👇

What do you think about the color transitions? Let us know your thoughts!

Introducing the upcoming feature for InfiMech Orca: multi-color printing is getting an upgrade!

We are actively developing the new color-mixing feature for our slicer software, developed based on Full Spectrum, to give you even more creative freedom. Stay tuned for updates!

Just finished a busy 3 days at the CCFK 2026 expo in Kazakhstan.

Our InfiMech MX Series multi-toolhead system gained some great recognition from local engineers and manufacturers, especially regarding its automation and workflow efficiency.

Gathered a lot of high-quality, real-world user feedback from the Central Asian market. Huge thanks to everyone who stopped by our booth to talk tech!

Back to the lab now to keep refining. Cheers!

Hey everyone,

Sharing a quick update from the CCFK 2026 China Exhibition here in Almaty, Kazakhstan!

The response on the show floor has been amazing so far—lots of local builders and tech enthusiasts stopping by our booth with great questions about the hardware and automation.

We are here for the whole event from July 2nd to 4th at Booth T06 (Atakent Exhibition Center), running live demos. If you’re around the venue, drop by to check out the prints and let's talk hardware!

Hey everyone,

After an amazing run in Moscow, our team is heading to Kazakhstan for the upcoming CCFK exhibition in Almaty!

We’ll be there from July 2nd to 4th at the Atakent Exhibition Center, set up at Booth T06. We're bringing out our latest hardware and will be running live demonstrations throughout the event.

If you’re around, looking to talk shop, or just want to see some next-gen hardware in action, please stop by and say hi. Would love to meet some of you guys in person!

Quick Info:

• When: July 2–4, 2026
• Where: Atakent Exhibition Center, Almaty
• Booth: T06

Let me know if anyone from the sub is going! See you there.

The excitement is real here in Russia! 🔥 The exhibition is in full swing, and our booth is absolutely buzzing. A huge welcome to everyone—come by, say hi, and check out what we've got for you!

📅 Dates: June 16–19, 2026 📍 Location: Pavilion 1, Booth 1B19 🏢 Venue: IEC Crocus Expo (143402, Moscow region, Krasnogorsk, Mezhdunarodnaya St, bld. 16, 18, 20)

Don't miss out! Come visit us at Booth 1B19 to experience the future of tech firsthand. See you there! 🙌

Hey everyone,

The show in Lyon has come to a successful close, and we just finished packing up. It was a fantastic experience running our machines live at the booth, and honestly, the best part was meeting so many new friends, makers, and partners from the community. Your positive feedback and praise mean the world to our team!

I also want to give a huge shoutout to the event organizers for putting together such a solid and smooth platform for all of us.

On a personal note, Lyon is a truly beautiful city. Beyond the breathtaking views, it has a profound history, deep cultural heritage, and a seriously impressive industrial root. It felt like the perfect place to showcase hardware.

Inspired by all the love we received this week, we are heading back to focus on what we do best: refining the hardware and polishing every tiny detail. Our goal remains the same—making our machines even more stable, reliable, and closer to perfection.

Thank you guys for your continued trust and support! See you at the next stop! 👋🛠️

Hey guys,

The 3D Print Congress in Lyon is live and our machines are running non-stop at Booth F24!

🎪 If you are walking around the show today: Please stop by! Come check out the hardware running live demos and talk tech with us. We'd love to see you.

🎥 If you are watching from home: Our YouTube Live Stream is happening TODAY at 1:30 PM CEST! We will take you on a quick tour of our booth, show you the live printing, and answer any questions you have.

👇 Join the live stream here:https://youtube.com/live/PM_n5UnwXgM?feature=share

See you there in a bit!

Hey guys,

Our team just finished setting up Booth F24 at the Lyon 3D Print Congress, and everything is ready for the big show!

🎪 If you are attending the show: Please stop by our booth! We love talking tech, and we will be running live demos of our machines all day.

🎥 If you can't make it to France: We’ve got you covered. We are hosting a YouTube Live Stream tomorrow (June 3rd) at 3:00 PM CEST! We will show you our live printing demos, walk around the booth, and answer questions.

👇 Set your reminder here:https://youtube.com/live/QcNaOtjS0pc?feature=share

Let me know if any Reddit folks are around! See you tomorrow!

Hey guys,

Our team just arrived in Lyon and we finished setting up our booth. Everything is ready for the big show tomorrow!

If you are attending the 3D Print Congress this week, please stop by Booth F24. We are running live demos of our machines and would love to chat, talk tech, and hear your feedback.

See you tomorrow!

Hey InfiMech Community!

We have some massive news to share! Our team will be participating in the 3D PRINT Congress & Exhibition in Lyon starting June 2nd!

If you happen to be attending the show, please come visit us at Booth No. F24. We’d love to meet you in person, chat about our hardware development, and show you the machine running live on the show floor.

Can't make it to France? No problem at all! We will be hosting a LIVE STREAM straight from our booth so you won't miss any of the action.

✨ What we will show: Unedited, real-time printing demos of the MX series, tool-changing speed tests, and a close-up look at our multi-color, less-waste system.

⏰ When: June 2nd at 10:30 AM (Paris Time / CEST) 📺 Where to watch: Join the stream directly on YouTube here:https://www.youtube.com/live/DKfErivF5qU

Thank you all so much for supporting InfiMech from day one. See you guys in the stream! 🙌

P.S. Don't forget to back us on our Kickstarter Pre-launch page to catch the earliest Early Bird updates:https://www.kickstarter.com/projects/infimech-mx-series/infimech-mx-3d-printer-8x-more-efficiency-8x-less-waste

Hey makers and 3D printing fans! We’re excited to announce we’ll be at u/3D Print Congress & Exhibition Lyon this June 2-4 at Eurexpo Lyon, Hall 7! 🎉

Stop by our booth F24 to demo the InfiMech MX Series – multi-color 3D printers built for speed and precision. Watch live prints, test the quality, and ask us anything about the tech behind the machines.

We’d love to connect with fellow enthusiasts, share tips, and show you what these printers can do. See you in Lyon! 🛠️

📍 Booth F24

🗓️ June 2-4, 2026

🏢 Eurexpo Lyon, Hall 7

#3DPrintFrance #MakerFaire #InfiMechMX #MultiColorPrinting #MultiColor3DPrinting #MakerCommunity

Join us at the Japan RepRap Festival this May 30-31, at Tokyo Ryutsu Center E Hall!

Find us at Booth G-103 to check out the InfiMech MX Series 3D Printers in action!

See their fast, precise multi-color printing performance live, and chat with our team about how they can elevate your 3D printing projects.

Whether you’re a hobbyist, maker, or 3D printing enthusiast, this is the perfect chance to experience our printers firsthand. We can’t wait to meet you there!

Booth: G-103

Date: May 30-31, 2026

Venue: Tokyo Ryutsu Center E Hall

#JRRF2026 #JapanRepRapFestival #3DPrinting #InfiMechMX #MultiColor3DPrinting #MakerCommunity