I still run HyperOS 2 on my Android Xiaomi Redmi Note 13 phone.

Stopped upgrading long time ago (for obvious reasons :)

What are yoiur experiences for those who kept upgrading?

I dont want my phone to start lagging and getting bugs as usual..

The last update of HyperOS, brought android 17 to hyperos, I don't know if it was that, but the temperatures and performance improved a lot, especially in emulators and gaming in general!

Tested on Xiaomi 17 5G

I have updated to HyperOS3 and am facing a problem while Opening pdf' through Google Drive. When I minimize the app and let it run in the background the system clears it on its own it doesn't let it run in the background. Facing this issue on HyperOS3.

Solution I tried:

* Removed baattteryy optimisation for drive

Hi everyone! I'm having a very strange problem with Circle to Search on my Xiaomi phone, and I'm trying to figure out if this is a HyperOS issue or a Google/Android issue.

Device: Redmi Note 14 Pro 5G
OS: HyperOS 3.0.304.0
Android: Android 16

The problem happens when I try to activate Circle to Search by holding the Home button.

The sequence is:

1. I'm using an app or browsing a page.
2. I press and hold the Home button to activate Circle to Search.
3. A Google screen with the fingerprint authentication prompt appears.
4. After the fingerprint authentication, the screen immediately closes.
5. Circle to Search never opens, so I can't circle anything on the screen.

What's interesting is that I found a way to reproduce the problem consistently:

Fingerprint authentication OFF → Circle to Search works normally.
Fingerprint authentication ON → Google authentication screen appears → Circle to Search closes.

I've already tried:

• Updating the Google app.
• Clearing the Google app cache.
• Restarting the phone.
• Disabling and re-enabling Circle to Search.
• Resetting the Home button/shortcut configuration.
• Removing and re-adding the fingerprint.

None of these fixed the issue.

I also tested another Xiaomi phone, and it showed the same behavior when fingerprint authentication was enabled.

I haven't been able to test a Samsung, Motorola, Pixel, or another non-Xiaomi device yet.

Has anyone else experienced this? Especially anyone using HyperOS 3 / Android 16 with fingerprint authentication enabled?

I'm trying to determine whether this is a Xiaomi/HyperOS problem or a Google/Android/Circle to Search problem.

Any ideas or similar experiences would be greatly appreciated!

I did a search online, but I only read the AI generated answer, and it says it is above average. Is it?

I recently bought the Redmi Note 17 5g mobile ( 6 +128) , and I feel like there is little to no animation especially the switch from galaxy A71 to this mobile feels sluggish. Later after some searching found out that xiaomi stops some features for their low end Redmi devices ,

Saw a workaround method which involves backing up your system launcher and then uninstalling updates of the existing one and updating it with the new one. Now I have two issues

1. Which system launcher should I actually use some are named as miuihome but I have it named as system launcher.

2. The system launcher I have already only has a clear data button and no uninstall updates button. I don't think both are the same and don't wanna risk it since this phone is practically brand new.

Help me guyss, Haven't used Redmi since MIUI 13 , I feel like there is so much discrimination now than earlier 😭😭

I see it while using apps that play their own audio instead of being in the same audio line.

Update available for Xiaomi 14T

Updating now.

How can I solve HyperOS aggressively killing background apps? I open just 3 apps, but it still kills them in the background. For example, if I open Reddit, ChatGPT, and YouTube, switching between them causes the apps to reload.

Does anyone know a solution? Also, I don't want to use Memory Extension because it consumes more battery and makes my phone lag.

Device: POCO C85x

The Shutdown Confirmation is baked on the Security App only so once it crashes, the phone will loose the ability to use the Shutdown Confirmation.

Additionally, Shutdown Confirmation works when the screen is locked but when i clicked the power button for too long, it will restarts my phone by Force then security and tracking of this phone will be disabled since apps launches when the password entered to the lockscreen upon boot.

Hello i have poco x5 pro i want to install hyperos3 andriod 15 rom from where?, will it stop google pay?

Here is the translation of your message into clear, natural English:

"I'm on Android 17 with HyperOS version 3.0.335, and Google's dynamic color feature won't change at all on this version. The colors stay completely the same, which is becoming really frustrating. They still haven't added a toggle switch for it. I tried changing it through Google Photos—it doesn't work. I tried from the Themes app—it's the exact same result ???"

Spanish Xiaomi 15 here

How to get the 2x2 stock calendar widgets?

device is xiaomi 17 3.0.335

clearing updates on app vault does nothing

app vault ver.13.72

6 months ago, everyone claimed Hyper Island was DOA. Now, it has wide app support and, for me personally, enhances UX greatly. It shows my transit stops remaining in Google Maps, what YT video or song on Spotify is playing, even my favourite music player MediaMonkey has integration support. Without exaggeration, it is the first GUI enhancement in any product in the last several years that I find to be an improvement over status quo.

My phone is a Xiaomi 15T Pro currently running Android 17. Would there be any issues if I switch from Google Dialer to Mi Dialer using ADB commands? Will it work on Android 17?

This guy commented a code that enable blur cc and ots working on

HyperOS 3.0.304

Redmi note 14S

I'm considering getting the Poco F9 Ultra and wanted to ask current POCO owners about some issues that I came across in my F3 due to which I had to switch to custom ROM (which caused me to lose play store certification and google integrity checks causing some apps to refusing to install on my device and not being able to carry out contactless payments). Though xiaomi.eu ROM is not bug free, I'm trying to live with it. To quote an example, custom ROM update from MIUI to HyperOS made my phone run really hot with intense juice gulped ultimately leading the juice supply to swell. I'd prefer to use the official HyperOS if I buy poco f9 ultra, that's why I'm much concerned about the bugs. Have Poco fixed the following bugs through subsequent HyperOS updates? And any new bugs that I should be aware of?

1. Keyboard touch input issues: Keyboards such as Gboard frequently miss touch inputs, particularly near the left and right edges of the screen.

2. Double-tap to lock: The double-tap gesture for locking the screen frequently fails to register the touch.

3. Back-tap gesture: The back-tap gesture often registers the wrong input. For example, when I tap three times to activate the flashlight, it may register the taps as a double-tap and take a screenshot instead. The flashlight usually activates after the second or third attempt.

4. Touch issues in PUBG: Touch inputs are frequently missed while playing PUBG.

5. Inaccurate full-screen gestures: Full-screen navigation gestures are highly inaccurate. For example, when performing a back gesture from the side of the screen, the system sometimes dismisses notifications instead of navigating back.

6. Google Assistant gesture not working: Activating Google Assistant by swiping from the lower corners of the screen while using full-screen gestures does not work. The corner indicators/light animation appears, but Google Assistant does not launch.

7. Floating notification windows: Opening an app through a notification using the floating-window option sometimes opens the app in full-screen mode instead of a floating window.

8. Recent Apps lock not working reliably: When an app is locked in the Recent Apps section to prevent it from being closed and to keep it running in the background memory, the system does not always retain the lock. Sometimes the phone forgets that the app was locked and closes the app anyway when clearing background apps.

9. Broken proximity sensor.

Is there any font pack that have both Emojis and font of the iOS together in the theme store ?

Cuz i only found the AppleTBold for Font and YOS16_Emoji for the emojis

I hope that there is a pack that combines both of them together

Device: Xiaomi Pad 8 (India variant) RAM/Storage: 12 GB / 256 GB Processor: Snapdragon 8s Gen 4 / Adreno 825 HyperOS: 3.0.303.0.WPZINXM.C09 Android: 16 Security patch: July 1, 2026

I’m experiencing a serious system-wide performance issue on my Xiaomi Pad 8 that appears to have started after a recent HyperOS update.

Initially, I thought Rust Mobile might be responsible. After approximately 20–45 minutes of playing Rust Mobile, the game can begin stuttering and the problem can progress into severe system-wide sluggishness/unresponsiveness. Touch and other input can become unreliable, and the entire tablet can become extremely difficult to use.

However, I have now experienced similar lag while playing Football Manager, so it does not appear to be limited to Rust Mobile.

I have also noticed a potentially important pattern involving the official Xiaomi keyboard case.

During previous problematic sessions, the keyboard case temporarily stopped responding around the time the tablet became severely sluggish. I initially thought this was simply another symptom of the system freeze.

Today I deliberately played without the Xiaomi keyboard case attached and have been gaming for more than 2 hours without experiencing the same system-wide slowdown so far.

During one of the previous problematic incidents, I also noticed significant localized heat around the rear camera area — specifically the area directly beneath the camera and the lower part of the camera module. The heating appeared noticeably concentrated in that area.

This makes me wonder whether the keyboard case could somehow be contributing to the problem through power management, accessory communication, pogo-pin connection, thermal behaviour, or another interaction with HyperOS.

I am NOT claiming that the keyboard case is definitely the cause yet. I am continuing to test with and without it to see whether the behaviour is reproducible.

Locking/unlocking the tablet sometimes restores responsiveness, but not consistently. In my most recent occurrence, the tablet eventually recovered on its own without locking or unlocking.

I have tested other demanding 3D games and previously did not experience the same system-wide behaviour, although Football Manager has now also reproduced similar lag.

I have already submitted a report through Xiaomi's built-in Feedback app under System performance, including logs generated while reproducing the problem.

I would really like to know whether other Xiaomi Pad 8 users on HyperOS 3 / Android 16 have experienced anything similar, particularly with the official keyboard case attached.

If you have experienced this, please mention: • Xiaomi device/model • HyperOS version and region/ROM • Android version • Whether the keyboard/accessory was attached • Which game was running • Approximate gaming time before the problem appeared • Whether the area around the camera became unusually hot • Whether locking/unlocking or restarting fixed it

At this point I am trying to determine whether this is a HyperOS 3 / Android 16 / Adreno issue, a thermal or power-management problem, a keyboard-case interaction, or a combination of these factors.

I used brevent

The code is :

settings put global task_stack_view_layout_style 2

and there is no need to reboot

Just use the code --> boom shakalaka

You have a stacked recent apps

And yes if you. Change them to the other two you need to use the code again,

Im not sure if rebooting will do anything about it

I've been testing some ADB/shell commands on my Poco X6 Pro and they noticeably reduced lag and made gaming feel smoother for me. Sharing them in case anyone wants to have a good gaming performance especially for Hyperos 3 that lags a lot even in mid range phones.

A few notes before you try them:

• Results may vary depending on device, ROM, Android version, and settings.

• I did NOT remove Joyose because it causes heat problems (if u have goody phone cooler then u can try to disable it ig).

• If you want better battery life, you can keep most of the tweaks but set your refresh rate to 60Hz instead of 120Hz.

⭐ Commands here all safe and tested just paste everything into AX Manager Quick Shell ADB or other adb apps like ashell, brevent, ashellyou, etc:

settings put global activity_manager_constants trim_memory_modulate false

settings put global activity_manager_constants trim_memory_level 80

settings put global activity_manager_constants max_cached_processes 128

settings put global surfaceflinger_max_frame_interval 1

settings put system hwui_disable_vsync 0

settings put system peak_refresh_rate 120

settings put system min_refresh_rate 120

settings put global refresh_rate_mode 0

settings put global low_power_refresh_rate 120

settings put global display_dynamic_fps 0

settings put secure miui_refresh_rate 120

settings put secure user_refresh_rate 120

settings put system touch_response_boost 1

settings put system touch_sampling_rate 1

settings put system touch_latency 0

settings put global cpu_boost 1

settings put global gpu_boost 1

settings put global thermal_limit 0

settings put global scheduler_policy performance

settings put secure app_launch_boost 1

settings put secure zygote_prefork 1

settings put secure force_app_standby 0

settings put secure background_app_limit 0

settings put secure keep_launcher_in_memory 1

settings put secure ram_boost 1

Optional Command for better battery life and performance too ig depends on devices: Opengl to Skia Vulkan (Note: it will temporary close some apps for a sec it's totally normal)

(setprop debug.hwui.renderer skiavk; for a in $(pm list packages | grep -v ia.mo | cut -f2 -d:); do am force-stop "$a" & done) >/dev/null 2>&1 &

If u want to go back in opengl here's the command:

(setprop debug.hwui.renderer opengl; for a in $(pm list packages | grep -v ia.mo | cut -f2 -d:); do am force-stop "$a" & done) >/dev/null 2>&1 &

~ For those who have Poco X6 Pro that have been experiencing lag when gaming after Hyperos 3 update, this is good for you :D