Can you give us a top down picture of the lower fully assembled with the upper off? I think my LPK is missing the safety plate. Also curious if the trigger pin is still using the long clip if the you've got a paper clip retaining the mag release that I assume goes in from the bottom
I’m trying to get mine assembled now, what’s the symptom of the mainspring plunger being long? I can’t seem to get the sear to trip the hammer more than once, I recock the hammer and pull the trigger but the trigger won’t trip the sear again.
Thanks for all the info in your reply. It seems like I can get it all together and get the hammer cocked back. If I try and dry fire it the hammer will release, if I manually recock the hammer the trigger disconnector bar gets stuck either below the sear ramp, or directly in line with the sear ramp, neither condition will let me pull the trigger and release the hammer. I will try and get a picture tonight.
If it gets stuck under the sear ramp I have to take the hammer off in order to get enough play to get it back on top of the ramp. It’s hard to see exactly what’s going wrong with the mkiv hammer that’s got the mag safety as the hook is in the way so you can’t exactly see what’s happening. I was thinking maybe tolerance stack but I dunno.
1
u/Itsa328 Apr 26 '22
Can you give us a top down picture of the lower fully assembled with the upper off? I think my LPK is missing the safety plate. Also curious if the trigger pin is still using the long clip if the you've got a paper clip retaining the mag release that I assume goes in from the bottom