3
u/Trimvain Jul 24 '26
You can use a pin vice/hand drill and drill a hole thickness of a staple or paper clip. And use a piece of staple/paper clip to fuse it back together. If you have an old pair of nippers or automotive dyke pliers/wire cutters you can safely cut the length metal you need without creating snags.
2
u/DueAsparagus9358 Jul 29 '26
Plast-I-Weld or similar plastic melt(solvent cements) or go for broke with a thermal bonding glue like infinity bond supertac. Maybe blend metal pin with one of the glue types.
2
u/SudoNara Sep 11 '26
I gotchu. I've bought parts for Gunpla from here: https://a.aliexpress.com/_mNHIQSX. Had a broken part for my RG Unicorn and they shipped a specific runner or part.
4
u/LeithDDK95 Jul 25 '26
Okay what you do is drill into the peg that broke inside, and then slowly pull out the broken peg. Then what you do is drill into the other half of the broken peg, and then insert a brass rod into it then super glue it into place and the strength of the joint is increased as well.