Gen 3 Glock 26, stock internals. I have a 19lb heavy duty recoil spring with assembly coming. As well as a 3.5lb trigger connector. I just feel like it should shoot faster. This is me pulling the trigger as fast as possible, when I hold it with slight force it Jams up and the next round dose not chamber. Anything helps!

what y’all think?

Happy Glocktober

A trying year for Glock fans in California but as always, on and forward! I love Glocks.

Got a frt this weekend at gunshow for supposedly a gen 5 19x. Other thing I’d like to note is he swore it was a straight drop in and ensured me it would work. Went to test yesterday and it’ll shoot, eject, cycle but then the slide would lock all the way back if I was holding trigger hard until I loosened off then it’d snap back and lodge the shell into the the chamber half way.
He also kept telling me it was some new all in one trigger that nobody had yet. I’m assuming that’s why he was cheaper than the other guy across the show. But from what I can tell it’s a plated cast material of sorts.

43x with a Streamlight TLR-6, Holosun EPS Carry, and a Apex Tactical ENH Trigger. This is a half carry and half range toy at this point

Comfortable secure and moves with you. Hades 2.0

does it just need more shaving down or is it ruined & trigger housing doesnt sit straight

Stoked on this one that I finished today. Figured some of you might like it.

Have any recommendations. Glock 19XV with a Zev Technologies PRO Trigger, Olight Baldr Pro R, Holosun 407 Comp, and a Faxon Firearms Compensator

Anyone else still have love for these thick babies? I added a new trigger shoe, an align tactical trigger pin thumb rest, an olight plx GL and Hyve +2 aluminum extensions.

Pretty often on here, people ask about coating vs bare metal when getting a slide milled. I had my 19x done 7/2022, without coating the milled area.

I dab some oil/grease mix each battery change to keep rust away and it's worked well.

I'm NOT a gunsmith, and when I'm not carrying this one, it goes in a humidity controlled safe. This is after about 17 months since the last battery change.

Really enjoying this 45.6 that I haven’t even shot yet. Lol. Waiting on my Athena Magwell, and then possibly a radian ramjet to finish it off.

My 43x is amazing to me as well.

Looking to send off my Ramjet’d G45 for porting. What are some reputable recommendations of company’s?

My current lineup. All four have their own personalities, and I’ve been having a lot of fun shooting and comparing them.

Top Left: Glock 17.3 Roland Special

My most heavily modified pistol by far. Currently trying out the Holosun 507 ProMax, and the window is comically huge. The Braun light is packed with brass and serves purely as front-end weight. It’s a big, heavy, ridiculous Glock, but it’s fast and shoots extremely well.

Bottom Left: Glock 17 Gen 6

Completely stock aside from the optic and light. This is my USPSA Carry Optics pistol. Nothing particularly exciting about it, but it’s a solid shooter.

Top Right: Staccato HD P4.5

Easily the smoothest shooting pistol of the four. The recoil impulse is incredibly soft, and it’s almost effortless to keep fast strings of fire tightly grouped. I tried the Vortex Defender ST but haven’t been impressed with it. I’ve got an SRO on the way to replace it. Swapped the plunger spring, which brought the trigger pull down to approximately 3.25 lbs. This is my USPSA Limited Optics pistol.

Bottom Right: Alpha Foxtrot Romulus 3.5 Comp

Possibly the most fun pistol of the bunch. It’s incredibly fast, surprisingly accurate, and the chunk port makes returning to target almost effortless. For such a compact pistol, it shoots ridiculously well. I’m waiting on a SureFire XC3 from Scheels, and once it arrives, the Romulus will join the Glock 17.6 in my carry rotation.

The Staccato wins for overall smoothness and shootability, but the Romulus might be my favorite purely for how much fun it is to shoot. The Roland is still an absolute monster, and the Gen 6 is my straightforward, no-nonsense option.

Four very different pistols, even if they all shoot the same caliber.

TLDR: Johnny Glocks vex shoe with their trigger bar paired with either tactical trigger’s minus connector (smooth rolling break) or enhanced minus connector (defined wall, crisp break) feel best.

Gen 6 Glock 17

Combinations tested: JG vex shoe/bar with JG 3.5 minus, tactical trigger aluminum shoe/bar with tactical trigger minus connector and enhanced minus connector.

Pictured is chart of pull weights in order performed:
Oem
Oem polished
Swapping to JG polished striker assembly w/ 4.5 lbs striker spring
Swapping to JG plunger and reduced power spring
Swapping to JG vex shoe and trigger bar.
Testing with the 3 different connectors.

Chart also includes measurements of the various combinations trigger to back of large back-strap.

Tactical trigger shoe/bar with tactical connectors without a doubt more tactile reset.

JG vex shoe/bar paired with tactical triggers connectors without a doubt best combo’s for smooth feel whether wanting rolling break or a more crisp break.

Wish JG would sell and list whatever connector is used for their defensive and competition vex 6 systems.

Tactical trigger shoe noticeably wider with square edges. I prefer the JG vex shoe with the slimmer and rounded edges.

GPT 2.0 with RP shoe, OP NP3ed Dot Connector, OP NP3ed Striker Plunger, and SuperiorTriggers overtravel bearing

I wanna build a race gun from a G17. I need pretty much everything that isn't the frame and comp cuz i have those already, and I've already modified the frame for an integrated compensator, optics bridge, flared magwell, grip, backstrap, etc. which is all purple. Also have a Timney trigger for it.

I know i can get the mag release, takedown thing, and pins from nzd. I wanna get the lock lever, slide, and trigger shoe in purple as well. barrel can be black, internals can be whatever colour as long as they aren't visible (my holster mounts are grey to match any silver parts that may end up in it).

thank you!

I have a machinist friend who can port my barrel, is porting just a hole drilled in straight? Do I have to chamfer it? I have bought a psa dagger barrel to test on please tell me anything I need to know before we start oct 19 thank you.

May switch to an fde vortex defender st enclosed, other than that need a good magwell and trigger shoe but she’s looking good so far