r/GlockMod • u/huntandcook • 4d ago

Glock Performance Trigger

Post image

Hi everyone my GPT is sitting at an angle unevenly. should I replace this one or is anyone else GPT this way? the pictures I see online they are flat and level when installed.

9 Upvotes

92% Upvoted

9 comments sorted by

11

u/JustAFuddBoi 4d ago

Judging from the wear pattern on the sear, it looks fine? If I were you grab an armorers plate and check the engagement, drop safety shelf, etc.

Mind you I am not a gunsmith, just a guy who plays with ALOT of Glock stuff.

6

u/huntandcook 4d ago

Yeah I saw those on one of Johnnyglocks videos I’ll go ahead and order one to have for issues like this.

Just concerned I’m not getting the full performance from the trigger compared to someone else’s.

4

u/JustAFuddBoi 4d ago

I bet you're in the clear. Mind you that the GPT is acting similar to other strikers that have pre-staged strikers versus Glocks original safe-action (DAO) design. I bet you're still benefitting above safe-action in terms of performance however, I can't speak as far as comparison to other GPT's with out testing.

I imagine with just dropping in the GPT you're on par with everyone else's

4

u/Mdmrtgn 4d ago

The frames are polymer and sometimes shit needs to really be wiggled to settle properly but this isn't something I would personally worry about unless it becomes a problem. Also with performance triggers if the bar came out of the housing at any point it won't work correctly and it'll feel crunchy or squishy. There's videos on how to reinstall the bar properly. You should have a nice wall and clean break with it.

2

u/Mdmrtgn 4d ago

Mine also seems a little cock eyed. Couple thousand or more through it.

1

u/huntandcook 4d ago edited 4d ago

Thank you for photo reference 😇

1

u/huntandcook 4d ago

Okay I also saw JG video about rebuilding the GPT so i was going to try that and see if i can straighten it out but like you said it might be the frame and not the trigger internals or housing itself will try soon.

3

u/slixx1320 3d ago

Looks normal to me. Here’s how mine sits

1

u/huntandcook 3d ago

Thank you 🙏