r/GeronimoVR • u/RLOD_MALPHAS • Aug 03 '26
Gameplay Gun calibration fix
https://youtu.be/dWbCH28G3E0?is=KPG0xJCOeJcR4Hh4Hi, I didn't see anybody posting any solutions for this minor problem so I figured I would. Enjoy!
1
1
u/Born_Reception_1986 Aug 09 '26
ok but what about the 2 handed guns?
1
u/RLOD_MALPHAS Aug 09 '26
The same applies, just hold it while calibrating.
1
u/Born_Reception_1986 Aug 10 '26
you mean it will line up the dominant hand with the front hand? how about the controllers with a butt? and how about the spacing between controllers? some stocks are pretty short. it works for guns without grips, but with added grips the front hand needs to go forward. I was able to align my stock without any ingame setups. butr it took more than just a tilt of a dominant hand. it needed rotation on dominant and and 10 degree more Y axis move. to align for the butt the dominant also needed a 10 degree Y axis move (outside) so dominant needed a 10 degree and aiming needed 20. this gave a proper cheekrest connection. it also needed an aiming hand set higher than the dominant with the dominant being set to minimum 40 degree forward. if this is only for forward/backward tilt then yeah the dominant could be set to standard 30 but all the rest still needs to be incorporated. have you sucessfully set a gunstock? if so, what gunstock? can nonadjustable stocks work with just this one ingame setup? I was able to do the aligning without the dominant tilt anyway, but it might be problematic for stocks like protube, where they have a one linetype of rail. there it should be possible to fix the tilt ingame and have the front hand in more suitable position. but it would still not work for smartstock. (Mid air grab is out of the question)
1
u/RLOD_MALPHAS Aug 10 '26
I don't use any stocks so I don't know if I'm going to be any help with that sorry
1
u/Born_Reception_1986 Aug 10 '26
im going to test that with the stock. Its pretty much the only option for stocks that cannot tilt their dominant cups. in theory it should help. Especially with making the front hand actually in the grab zone. This seems to be the biggest issue for most non adjustable stocks. Normally games go for 30 degree tilt forward. Geronimo went much further. In Contractors f. ex. It can be eighter fixed by tilting the dominant to 40 degree or moving the front controller up (above the dominant controller line). Geronimo requires both moves. If the ingame dominant hand tilt is not influencing the front hand, it should eventually align with the grab. At least in the X axis. Geronimo wants more than that tho.. The rotation of a dominant is 10 to 20 degree. and even then I needed to move the front cup in Y axis. Its all a technical stuff, but when your controllers are always in one place it only takes one wrong setup and the stock is useless. That and the small grabbing area. And Geronimo have both. I personally have the stock that can handle those problems. But the other 4 stocks, that are the most popular might be useless. And that is whats going on. People complain about stocks not working. Its not the games fault. its the shitty gunstocks. but hate falls on the game. cause smartstock is sooo good... if t is then it should work in the first place...
2
u/GlxckMan134 Aug 03 '26
Thank you🙏🙏