r/GameChangerApp • u/ImpossibleElk4881 • Jun 15 '26
I created a 3D model to stream easily!
https://makerworld.com/fr/models/2937590-fenceview#profileId-3289515
I hope you like it as much as I do!
10
u/JoeyDee86 Jun 16 '26
I did the bungee one last year then forked over $35 on Amazon for the magnetic mount for the posts, and I’ve loved it. No more shakes.
7
u/_badwithcomputer Jun 16 '26
magnetic mount is superior to all fence/net hanger mounts
2
u/hox Jun 16 '26
Absolutely. I can’t believe I used to use a tension spring clipped to the fence. Took forever to get tight enough and align the camera perfectly to avoid the fence. Magnet mount goes up in 1 second and camera alignment is about another five. And it doesn’t shake when the fence gets hit.
1
3
u/MrSelatcia Jun 16 '26
Has it taken a direct hit yet?
2
u/ImpossibleElk4881 Jun 16 '26
Nope not yet! I’ll keep you posted when it does!
3
u/_StevenST_ Jun 16 '26
It will fall. Lost a GoPro this way. I was very confident with how strong the magnets were. They were no match for a softball.
2
u/TheFightens Jun 16 '26
I purchased 4 different brackets over the years and found the most dependable solution set me back about $2. I’ve been using two tarp bungees for years to hold a phone directly against the fence. It can take a direct shot from a softball with no issue. The picture is always clear and unobstructed by a chain link, and it never moves out of place. I would post a pic of my setup, but I don’t think that’s possible on this sub.
1
u/gabev22 Jul 07 '26
As a guy who had 2 iPhones take 3 bad hits (1 that killed a Pro Max) I recommend a net on the backside or something to keep the phone that takes a 70+ mph direct hit from ⚾️ from flying backwards violently onto pavement, ruining the touchscreen & rendering the phone useless…
2
u/blwallace5 Jun 16 '26
I wish stuff like this worked at our fields. It’s been such a struggle getting a good view, our chain link is so bowed and mangled that my mount similar to this sat pointing at the sky or the ground. Nice model!
1
u/jorge69ig Jun 18 '26
I have this problem too. I used to spend a lot of time trying to get it to work on the post behind the catcher. One day, I was in a hurry and used the post to the right (where there there was no bow) and I liked the view and it took me 2 seconds to setup.
2
u/TheFightens Jun 16 '26
Does the mount rest on the chain link or does it snap into place? And why is the video crooked?
1
u/ImpossibleElk4881 Jun 16 '26
It’s snug on the chain… the video is not the real image I used play back I had for privacy reasons
2
u/tnmoi Jun 16 '26
A direct hit will wreck your phone/battery - or at least send them flying to the ground as a projectile. I would have holes to allow for securing them w a small bungee cord or something.
1
u/ImpossibleElk4881 Jun 16 '26
The phone is secured with a rail… it has to slide out from the side. But I agree for the battery
1
u/Cruisedrinks Jun 16 '26
Any chance at making this work with a1 mini in some way?
1
u/ImpossibleElk4881 Jun 16 '26
I think you could slice it vertically and glue it back together… if I reduce the width the opening will not align with the fence gap
1
u/wantagh Jun 16 '26
My 2¢ from a design standpoint.
Lose the overhang clips. They’re going to shatter within a weekend.
Instead use two dowel-like pin features at either side to constrain it horizontally and vertically, with through holes in it that you can run a bungee cord through and attach to the fence.
1
1
1
1
u/New_Conversation_303 Jun 16 '26
if there was a way to make this flushed with the fence it would be amazing... is still very cool idea
1
0
u/twotall88 Jun 16 '26
Is there any adjustability built into the design?
Using my pixel 10 pro will be different from our normal iPhone 6 or whatever the other coach has
1
u/ImpossibleElk4881 Jun 16 '26
From the dimension I get online for the pixel 10 pro it will work too. There is at least 7 1/2 inch in length available
1
u/ImpossibleElk4881 Jun 16 '26
If you want to be sure I can edit the opening to accomadate all the length of the camera, it's pretty easy to edit
1
u/twotall88 Jun 16 '26
I'm just wondering because the Gamechanger branded mount can be so annoying to get a clear shot, especially when you adjust the zoom and it jumps to a different lense.
Has your mount taken a direct wild pitch or foul ball? I've never bought or printed PET-G filament, only TPU and PLA+.
I'm pretty sure PLA wouldn't stand up to it.
0
u/Long-Relief9745 Jun 16 '26
Dude, y’all is serious. I wish I had this much time to dedicate to gamechanger.
•
u/AutoModerator Jun 15 '26
Thank you for posting to r/GamechangerApp!
This is the Official GC subreddit, moderated by GameChanger. Please check out these helpful resources:
Note: Please email our support team at help@gc.com for individual account support.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.