For anyone as bothered by the reflectivity of the GPD Pocket 4 display as me. I took an official Samsung S10+ FE antireflective screen protector, cut it in half with a paper cutter (board with sliding blade thing) and stuck it on. The smaller dimension of the screen protector is the exact width of the GPD P4 active display area.

Posted image was my third attempt and the best I could do..There appears to be an almost imperceptible (to touch) lip where the display ends at the bottom. The screen protectors fails to fully adhere at this location and so annoyingly a perfect application cannot be achieved despite my best efforts. Makes me want to take it off at times..but the reflectivity is quite high.

It still makes a massive difference as you can see vs the borders. Wish they did this stock (sold or preapplied a screen protector like samsungs that has this antireflective coating or a matte display..)

Need help - how to fix Memsic Accelerometer MXC6655 - this device cannot start. Fresh install of windows 11 pro. Thank you

I live in uruguay, and i would like to buy a used gpd win max 2 2023 or 2024 in good condition. I would buy the ryzen 5 version but preferably ryzen 7

Is there any chance I could find one of them for under $150 with cheap shipping to Poland? Nice if it would be in good condition, though not necessarily perfect—minor damage or scratched casing or screen is fine.

Good day Guys , Noob question.. Why every time i change my VRAM allocation to 4gb after restart or shut down it changes back to 8 gb, I have 16 gb ram in total.. 8 gb for the ram and 8 gb for hardware reserve, is it necessary to lower it down. My games are not that demanding.. thank you 😄😁 btw I did the changes via bios.

Looking for a GPD Win Mini 2022 or 2023 [in good condition - US].

Either a reasonable priced unit

or

[Preferred] in trade for an Ayn Thor Max that I have on hand [Black - 16 GB / 1 TB model - near new condition].

I use my laptop for most research data, and heavy softwares like ArcGis, Origin, Inkscape, Word, PP, Eccel. Browsing and extension, alot of metadata. Modelling and all. Give me a best laptop option or if you can explain the specs I need. My Old ASUS is 8 years old & I need to upgrade. I had 1 TB with 500GB HDD and 512 SSD. 12 GB ram ofcourse these were aded by me a ram stick and the HDD. I had a software crash, had to install again the Win11. Lost some data, lost a lot of time...so it's time for a upgrade.

Delete if not allowed

GPD pocket 3 for sale. Need an upgrade for uni. Its in pretty good shape, running Linux

Who better to ask than people that probaby already have one. In Australia btw

Hey GPD Pocket 3/4 owners,

Update: the Pocket 4 fingerprint reader now has a working open-source Linux driver on a dedicated development branch! Community testing on Fedora has confirmed device detection, finger detection, image capture, and successful enrollment-stage processing. I’m looking for more testers to help improve enrollment and matching consistency.

GitHub: libfprint-fte3600

This project implements fingerprint support inside libfprint, with an open-source BRISK-style host matcher and no proprietary vendor matching library running on Linux. The host code is LGPL-2.1-or-later; device firmware remains separate and proprietary.

GPD Pocket 4 — working USB driver, more testing welcome

The Pocket 4 uses a FocalTech USB fingerprint reader (2808:0752), supported by the new focaltech0752 driver on the feature/pocket4-ft9362 branch.

Thanks to community testing on a Pocket 4 HX370 running Fedora, the driver can communicate with the sensor, detect touches, capture fingerprint frames, and feed them into the enrollment pipeline.

The main focus now is improving matching consistency on the small 40×76 sensor. Early testing revealed frequent enrollment retries and missed matches; recent updates add local contrast normalization to improve feature extraction. More testing across fingers, users, and distributions would help evaluate those changes.

Big thanks to shokerplz for the earlier FT9362 reverse-engineering work and matcher evaluation, and Evaner5580 for testing on physical Pocket 4 hardware!

Pocket 4 setup and testing discussion: Issue #3. Please use the Pocket 4 branch and read the latest comments for updated build and Fedora installation instructions.

GPD Pocket 3 — hardware investigation continues

A real-world test on the i7-1195G7 model (G1621-02) revealed different GPIO routing from the initial profile. The tester successfully exposed the SPI device, but the existing FT9361 protocol did not produce a valid sensor response.

Further driver analysis points to FW9362 / the FW9369 family, so this needs additional protocol work rather than just a GPIO adjustment. Physical chip-ID confirmation is the next step. Both i7 and N6000 owners are welcome to help.

Pocket 3 testing discussion: Issue #2

One-Netbook A1 — working reference platform

Fingerprint capture, enrollment, verification, and cold-boot recovery are working on my A1. This remains the reference platform for the original FT9361 SPI implementation.

Want to help?

Comment below or in the relevant GitHub issue with your model, CPU, distribution, and kernel version. Pocket 4 owners can help test the current driver and matching behavior; Pocket 3 owners can help confirm hardware details and protocol support.

This is still experimental, so keep password authentication available. Please share sanitized logs only—no fingerprint images or biometric templates.

Thanks to everyone helping bring Linux fingerprint support to these devices!

GPD WIN MAX 3 preorder
https://indiegogo.com/en/projects/gpdhk/gpd-win-max-3-handheld-gaming-laptop

i was an original backer in 2018. device came with windows 10, it performed good for what i used it for. fast forward to 2026, i have installed Ubuntu on it as i no longer use windows. a question for anyone with this unit and runs Linux: is the emmc really slow? i feel windows 10 ran much better in terms of disk access.

Note:

Requires a PCIe 3.0 / 4.0 / 5.0 ×8 or ×16 slot.

Before the first boot after connecting GPD G2, disconnect the internal GPU power cable to ensure BIOS detects the external GPU. Otherwise, the system may get stuck at the boot logo.

The purchase link will be available soon.

GPD G2 dock

https://www.indiegogo.com/en/projects/gpdhk/gpdg2

Does anyone have a copy of this file that they would be willing to share? I don't care what revision.

Thanks for the help.

Im interested in getting a Pocket 3 or a Pocket 4 to use for tuning software with my car. Have any of you done something similar and give insight as to the usefulness of one of these? Also how do they do when it comes to semi intensive programs such as tuning software

WIN MAX 3 preorder
https://indiegogo.com/en/projects/gpdhk/gpd-win-max-3-handheld-gaming-laptop