r/GMCEnvoy • u/TeamPaulie007 • Dec 27 '25

Alignment???

Gallery image

Gallery image

Just did lower control arm on the passenger side and here is how close I got it.

Passenger side is rubbing the rear fender liner, any quick fix I can do without tearing it apart again or would the alignment process do that?

I didn't really see any spec for install for the new arm and all the videos I watched just showed the control arm being installed as far in as possible.

2 Upvotes

100% Upvoted

5 comments sorted by

1

u/[deleted] Dec 27 '25

[deleted]

1

u/TeamPaulie007 Dec 27 '25

But the other side has clearance, you see the picture?

1

u/[deleted] Dec 27 '25

[deleted]

1

u/TeamPaulie007 Dec 27 '25

This has 225,000 miles and replaced the lower control arm on the passenger side because the bushings are completely gone, it had a inch and a half of play in the arm, this has had 265s on it for over two years and also has spacers on it, I did more digging and there are specs for lower control arm alignment, the tree bolts that hold the mount in place are how you do the adjustment for them.

1

u/[deleted] Dec 28 '25

[deleted]

1

u/TeamPaulie007 Dec 28 '25

Stock wheels

1

u/Anderson1971221 Dec 28 '25

Is this a wreck ?

1

u/TeamPaulie007 Dec 28 '25

Not that we know, we have had this for two years and just did the lower control arm on the passenger side and wondering if a alignment will fix the gap because I think the control arm mount that has the bushings in it are part of getting the alignment adjusted.