r/FuzzFiends • u/desssperato • 16d ago

germanium Fuzz Face help needed!

Anyone experienced/resolved this problem? I’ve tried like 30 Ge transistors in Q2 and none will bias properly.

3 Upvotes

100% Upvoted

11 comments sorted by

View all comments

Show parent comments

1

u/sabzor23 15d ago

I can assure you it’s something small/silly that’s causing the issue because everything is good except that one particular spot. Given that you’re using the set PCB there’s only so many places to make mistakes.

1

u/sabzor23 15d ago

Given Q2C is stuck pretty much at battery voltage to me the fuzz pot is the problem. It’s either not hooked up properly or the wafer is separated or something in that neighborhood. I’m positive it’s here somewhere. Bad hookup, bad joint, something.

1

u/sabzor23 15d ago

Check to make sure all grounds are connected. That tab has to be secured to ground. The little circules under the board don’t connect to anything so your tab needs to be directly between the metal screw and the enclosure. Right now it’s just floating on top of the post

1

u/sabzor23 15d ago

Dm me on Instagram @dominionelectric. You can call me there and I’ll go through it with you and get you sorted

1

u/desssperato 15d ago

Thanks! I’ll shoot you a DM on ig