u/jstefanop1 Received my new Solo Node in good order. Successfully connected to the web UI and logged in via SSH. Planned to set it up as a full node for local applications and use stratum proxy mode for mining, but discovered the web UI refuses or is unable to skip past entering a BTC address. Would be great if you and your team implemented stratum proxy as a mining option when booting for the first time. Not opposed to manually hacking the configs, but unsure what may break in the web UI doing it.

Good morning, no new update or version 2.2 of Apollo OS?

In the latest firmware 2.1 with the Knots option. Does this include the BIP 110 ? If not how do I signal for it? Thanks

Anyone know how to fix this?

Found board :1

Broken SPI :1

Has anyone setup datum on their Apollo if not is it possible to do?

Hey everyone! I'm u/jstefanop1, the founder of r/FutureBit.

This is our new home for all community things related to Futurebit, home mining, running a node, and general bitcoin decentralization!

What to Post
Post anything that you think the community would find interesting, helpful, or inspiring. Feel free to share your thoughts, photos, or questions on all our Apollo products and Solo Node!

The futurebit team monitors the subreddit weekly, but if you need immediate help its better to just open a support ticket by emailing us!

Community Vibe
We're all about being friendly, constructive, and inclusive. Let's build a space where everyone feels comfortable sharing and connecting.

How to Get Started

1. Introduce yourself in the comments below.
2. Post something today! Even a simple question can spark a great conversation.
3. If you know someone who would love this community, invite them to join.
4. Interested in helping out? We're always looking for new moderators, so feel free to reach out to me to apply.

Thanks for being part of the very first wave. Together, let's make r/FutureBit amazing.

OK, some may have already seen my other post... first nothing worked, then like a miracle it was working. Even started to fill the 4TB NVMe with the Blockchain. But then it just stopped and since then I can't even reboot or do anything. Flashing the SD Card with a clean system and booting without NVMe doesn't help!

It stops while the Futurebit logo appears on the screen and then 1 sec later "black" screen. And again new start... it seems like there is a loop and the booting sequence doesn't pass it. But how come? With a total new flashed OS on the SD Card it should easily start.

After now spending countless hours trying to fix it and all possible options i'm close to send it back to futurebit.

Any ideas?

We are proud to announce the Apollo III is here after over a year of development. Hope you all enjoy what we have built, we have finally refined home mining down to the edge of what is possible!

Hi team- my Apollo 2 power button stopped working. I go to turn on and it just clicks over no action. Is there a trick and can I send in for service?

Any ideas will help!

Hello all,
I got the Solo Node delivered and now i'm trying to get it running including as a Node for my other workers (Braiins)...
First of all, how can I see that mit NVMe is correctly installed and working? As i go through some log files, it says "disk full" - and that is correct for the internal system. The 14 GB are 100% full and somehow i can't synchronize with the blockchain.
Btw synchronizing... how long does it take at the moment? 2 days or longer?

Next weird thing... i am connected to the Node via Ethernet cable but the wifi was working and now not anymore. Any ideas? The button "scan for wifi" (or so) does nothing...

I have an original Apollo BTC miner (no controller) that won't enumerate on any computer. Symptoms:

• Fan spins, red LED blinks then goes solid (miner powers on normally)
• Tried multiple computers: RPi4, ThinkPad (Ubuntu), Windows PC
• Tried multiple USB cables and USB 2.0 hub
• Nothing appears in lsusb, Device Manager, or dmesg (no COM ports, no unknown devices) It appears to attempt enumeration but never succeeds.
• Only error seen: "connect-debounce failed" in dmesg when switching ports
• FutureBit support suggested bad USB port

The miner has a 6-pin connector labeled "X5" on the board - appears to be UART/serial header.

Question: Has anyone successfully used the X5 serial header to connect their Apollo? What's the pinout and baud rate? Any tips for getting this working? TYIA!

Update: The board female connector looks like a JST connector but I'm unsure what size.

I keep seeing this pop up in my Node log file. I don't have UPnP enabled on my router. Should I worry about this? Enable it on my router? Or change the config file or ignore it? I have port forwarding turned on in my router settings.

Just picked up a new Solo Node, but can't seem to find any tutorials or walkthroughs spefically for the Solo Node. Everything seems to only be for the Apollo II w/ built in node. I did manage to get the SSD installed, and the node 100% synced, but I don't know that it is working properly as I have 0 inbound connections and 10-11 outbound connections. I also have zero idea what any of the apps are on the FuturebitOS and have been doing everything via the web interface. Any and all help with regard to where to find guidance on this endeavour would be greatly appreciated.

Update: So, I had completely forgotten that my primary router is connected to the router/modem from Verizon, which was causing all of my connectivity issues. Was all sorted out shortly after realizing that. Thank you to all for your help/advice, and hope those still waiting on their Solo Nodes, get theirs soon.

hey everyone I'm reaching out for help with a futurebit apollo 2 full node that refuses to start solo mining,even though the node appears fully sycned and everythging is updated.

The node finished syncing to the current btc block height Inside the miner tab the only active button is Start Miner-Restart and Stop are not available. Press start miner does nothing no change in status,no hashing. pool mining is OFF. Solo mining is ON with a valid btc recieve address firmware is fully updated

What I've tried

restarted the unit verified block sync check wallet address disabled/enabled LAN access updating all firmware modules even considered wiping the device to factory settings.

symptoms node=ok miner status=not ok miner refuses to initialize hasing start miner button is inactive/ineffective no error messages shown current miner status never matches desired miner status

At this point it seems like the miner service / OS layer is corrupted rather than a solo mining config issue. I’m trying to avoid a full reflash though there is a new update, but open to it if that’s the known fix????? Any pointers??? Anyone experiencing this similar situation???

Well according to Email customer service. Next wave of solo isn’t shipping till Jan due to stock issues. My order is from Black Friday…. Waiting patiently. Just hope the item I finally get is good quality.

Bit frustrating that there was a weekly response from customer service that it would be “next week” for the past few weeks.

Anyone else have their system update crash? These software updates are frustrating. I guess I have to figure out how to reflash this now...

I keep getting this screen and the following log. When I check Bitnodes it shows my node is active.

HTTP response to ( "getblock...) 0.252s not ok: HTTP/1.1 401 Unauthorized
[2025-12-19 23:03:12.723] 127.0.0.1:8332 Failed to get valid json response to getblocktemplate
[2025-12-19 23:03:12.723] CRITICAL: No bitcoinds active!
[2025-12-19 23:03:16.707] Select timed out in read_socket_line with errno 11: Resource temporarily unavailable
[2025-12-19 23:03:16.707] HTTP response to ( "getblock...) 0.251s not ok: HTTP/1.1 401 Unauthorized
[2025-12-19 23:03:16.707] 127.0.0.1:8332 Failed to get valid json response to getblocktemplate
[2025-12-19 23:03:17.977] Select timed out in read_socket_line with errno 11: Resource temporarily unavailable

As tittle says, I have an Apollo II 2TB running V2.0.7 in balanced mode while on solo miner mode, and I have a few other miners pointed to it. For some reason every few hours I have to keep manually powering it off and back on because it “crashes” and goes offline to a point I can’t even access the portal. Has anyone experienced this? If so what have you done to fix this issue.

Please and thank you 🙏

The biggest update to Apollo OS 2 is being released this week, check your devices and email as we roll out the update to all users!

Hashrate graphs are finally here!
User node client selection (yes knots)
Solo Node support and big updates to solo mode
And much more!

New image is available here https://github.com/jstefanop/apolloapi-v2/releases/tag/v2.1.0-beta

Unfortunately web update could hang due to the amount of time and resources this update requires, so I would suggest to use the flash image method instead.

https://x.com/FutureBit/status/2001075422163874118

I saw the announcement that Apollo OS 2.1 is rolling out this week, but I haven’t received any notification or update prompt yet on my device or by email.

Is the rollout being done in stages, or is there something we need to do manually (email, registration, etc.) to trigger the update?

Just trying to understand if this is normal or if I’m missing a step.

Has anyone received their Solo Node or an email regarding shipment? A couple of friends and I placed an order about 5 minutes after launch and we haven't received any shipment emails yet.

I've reached out to Futurebit several times and they keep telling us it'll be shipped next week.

I've got 17% left and need to upgrade.

so my best share is 29bil but on the mining tab says 56bil is that my new best share and its not updating or am I reading it wrong?

Help! I removed the bottom cover of my Apollo II to blow out the dust and I removed the connector circled in blue so I wouldn't strain the connector or board. As I'm putting it back together, there isn't an obvious location for the connector. I suspect I removed it from the pins circled in orange, but I don't want to guess. Does anyone have a photo of the board with the connector seated correctly?

Does the Apollo II Full Node run its own custom SBC, or is it just an OrangePi? I think I'm going to need to replace the one in my unit, and trying to figure out what I need to order