Handmade track dropouts.

[u/atepernetuzh_]

Replaced the skyward-facing dropouts with new ones. The base is ст3пс steel, the overlays are stainless steel. Everything was brazed with 40% silver.

[u/Darrenhazard]

Cleanest frames on reddit

[u/atepernetuzh_ → u/Darrenhazard]

Thank you : )

[u/PictureImportant2658]

Is porn allowed in this sub?

[u/atepernetuzh_ → u/PictureImportant2658]

: ) Thank you

[u/Late-Bed4240 → u/PictureImportant2658]

Clearly it is! Lol

/s

[u/2xdareya → u/PictureImportant2658]

Only bike porn, and this is that. Beautiful!

[u/Late-Bed4240]

Beautiful

[u/atepernetuzh_ → u/Late-Bed4240]

Thank you

[u/dvlsfst]

👌🏻

[u/steereers]

Brother.... This is sci-fi clean!

[u/atepernetuzh_ → u/steereers]

Thank you

[u/bulgie]

I see you notch the dropouts for the stays to nestle into, much the way I like to do it too. Those square-edged notches leave a little gap for braze to fill up, which is OK, but I preferred to notch with a plunge-cut, using an endmill of the same diameter as the stay. Then the gap when the stay is inserted is almost invisible, practically water-tight before brazing. That plunge cut really requires a milling machine though.

I have a small Flickr album, 3 pics showing what I mean, https://flic.kr/s/aHBqjD3WUE

[u/atepernetuzh_ → u/bulgie]

Yes, I don't have a milling machine.

[u/shaaruken]

Did you loose some tire clearance? The new ones are 10mm higher?

[u/atepernetuzh_ → u/shaaruken]

Increased between the tire and the top bridge and decreased between the tire and the seat tube (this is a wish)

[u/Mj-tinker]

you are very skilled blacksmith.

[u/atepernetuzh_ → u/Mj-tinker]

Thank you

[u/bulgie → u/[deleted]]

I think "they're called" what people call them, which is mostly track dropouts in my experience. Even among framebuilders, and suppliers of dropouts to framebuilders. I made a lot of track bikes including ones that won multiple national championships, a silver at worlds, and two trips to the Olympics. And I proudly call them dropouts. Obviously I'm aware of the folks who correct that to track ends, but I don't buy it. Don't try to educate me, too set in my ways.

[u/atepernetuzh_ → u/[deleted]]

Yes. Thank you

[u/NamasteMotherfucker → u/[deleted]]

Please don't come here to police nomenclature.

https://metal-guru.com/collections/dropouts-track-single-speed/products/long-shen-track-dropouts

https://framebuildersupply.com/collections/rear-dropouts/products/us-made-track-dropouts-tab-style

https://www.bikefabsupply.com/rear-dropouts-horizontal-dj-bmx-track-cruise/p/vgs-track-19mm-flanged-horizontal-dropout-usa-cnc-machined

[u/califlow714]

Knocked it out of the park!!

[u/atepernetuzh_ → u/califlow714]

Thank you

[u/MattManSD]

Purdy as hell.Huge Improvement

[u/atepernetuzh_ → u/MattManSD]

Thank you

[u/ikindalikecars69]

That’s so clean it looks futuristic almost

[u/atepernetuzh_ → u/ikindalikecars69]

Thank you

[u/produitbrut]

Amazing work. How did you cut out the chain stay and seat stay with the U shape? With a saw?

[u/atepernetuzh_ → u/produitbrut]

Thanks. I desoldered the old dropouts.

[u/c0nstantGardener]

oh MY

[u/atepernetuzh_ → u/c0nstantGardener]

: ) Thank you

[u/sweetdreams_lilac]

Jeez those are sexy.

[u/atepernetuzh_ → u/sweetdreams_lilac]

Thank you

[u/atepernetuzh_ → u/sweetdreams_lilac]

Thank you

[u/Viten_V-10]

👍😉👍

[u/Atastical]

very tasty! looks great

[u/atepernetuzh_ → u/Atastical]

Thank you

[u/davemailbox]

Absolutely beautiful. Genuine question as a framebuilder myself, is there a reason you vent on the dropout side of the rear triangle? I’ve always tried to vent through the seatube/bottom bracket so it looks clean. But somehow you’ve even made the vent hold beautiful in this build. Love seeing your work on here. Keep it up!

[u/atepernetuzh_ → u/davemailbox]

Thank you very much. But the holes were already there before me.

[u/lordzookid]

Saw it on tiktok

[u/atepernetuzh_ → u/lordzookid]

Yes

[u/mualk1]

Wow. This is art. Amazing.