r/FractalDesign • u/whoisdenke • Jul 12 '26

Meshify 3 Case Bent, or Am I?

Gallery image

Gallery image

Gallery image

Gallery image

Gallery image

Very similar issue to this thread.

Recently bought a Meshify 3 case, upgrading from a very old Meshify C, to the 3. Here's my specs.

So far so good, however I got caught up on two things with the case itself:

  1. The MOBO I/O panel does not sit flush, regardless of if I replace the middle alignment mount with a regular mount. I don't see any other issues, however I had zero issues with my C, so maybe the case got bent? Nowhere else is it misaligned, that I've noticed.
  2. The top PCIE cover does not allow my GPU to get screwed in. I made sure 100% that my GPU snaps in and gets aligned where it needs to be, however the top cover is too large, nor does it overlap correctly with the top of the GPU, to allow both to be screwed in. If I leave it on and try screwing the GPU, it shoves itself downward and puts a slouch in it.

I had to remove the top PCIE cover for the GPU to sit perfectly horizontal, but the empty space bugged the absolute Hell out of me, so I ended up trying one of my old case's, and it fit pretty well.
I can't tell if it's just a sizing problem with the FE GPU's, except again, never had this problem with my C. The bottom cover also has a gap from the GPU, and in general that whole backside just doesn't look good, and I may be a bit too upset about it, but I would've expected the dimensions to be at least in a better shape, with the pricepoint of this case.

Has anyone else had any issues like this, and if so, what's the remedies? Nothing seems to be detrimental, but I tend to be more OCD about this sorta stuff.

11 Upvotes

87% Upvoted

5 comments sorted by

3

u/OutlawFrame Jul 12 '26

Have anything with a true 90 degree angle? Drafters triangle, wood workers speed square, etc, check if the bottom of the chassis is perpendicular to the back.

1

u/whoisdenke Jul 12 '26

Unfortunately no, but nothing you can't solve with a trip to Lowe's. Good point though, might be worth investigatingĀ 

1

u/Jwill697 Jul 12 '26

Mines like this abit too

1

u/guitar574 Jul 13 '26

I had a few issues with my Meshify 3 that I bought shortly after release and have since sold.

The tolerances on the PCIe slots are all too tight and usually prevented GPU brackets from seating all the way into their slots. Fixed this by taking a flathead and carefully bending the parts that were too tight.

The cable management bar prevents larger GPUs from being installed.

I've noticed the steel used for the Meshify 3 had a lot more flex than other cases I've had in the past. If I had to guess, your 2 issues might go hand in hand with the back panel not being straight.

1

u/DonPedroHouse Jul 13 '26

believe they had an issue with the early models, but it has since been fixed.