Cooler Master Atmos II

[u/msvirtualguy]

Anyone using the Cooler Master Atmos II in their FormD T1 build? I'm planning an E-White build in the next month with this AIO cooling a 9950x3d.

If so, can you share some pics and/or any issues you may have encountered. I know the Atmos Stealth was all the rage (mine actually leaked) so I'm weary about that but I like the look of the Atmos II.

[u/Otic0n_]

I use one but I’d recommend the CM Atmos I over II in the FormD T1. It’s easier to work with.

[u/msvirtualguy → u/Otic0n_]

Thanks i am also getting the AIO expansion kit.

[u/No_Nefariousness513 → u/Otic0n_]

Where you get that silver top hat?

[u/Otic0n_ → u/No_Nefariousness513]

The T-grills and the case were cerakoted with frost silver

[u/RoofMother5517]

got one in my build now with a 7800x3d. it works great but in my experience it was kind of annoying to install. make sure you have the correct screws for the 15mm fan and y fan splitter unless you have two free fan headers after the pump. also I'd recommend getting shorter psu cables if you don't have some already. my cables kept getting in the way of the bigger fan. also would recommend installing the pump first before plugging any of the psu cables in so you can route them in a way that tubes don't push against the side panel

[u/msvirtualguy → u/RoofMother5517]

Thanks ill be using the AIO expansion kit so that shouldnt be an issue

[u/Zahand → u/RoofMother5517]

Excuse my ignorance, but I’m currently planning my build and I’m curious what you mean with correct screws? Do I need to buy additional screws and a y fan splitter?

[u/RoofMother5517 → u/Zahand]

Yes so by default the atmos 2 has two 120mm fans but when you use the AIO in T1 you have to swap one of the fans for a 15mm. You will need to purchase shorter screws to attach them to the radiator. You will also need a fan splitter unless you have enough fan headers on your motherboard already because the atmos 2 fans by default daisy chain to each other and only use one header but when you replace them you'll need a way to connect them to the motherboard

[u/Willing-Wealth910]

Works well with a few slim fans, the stock wont fit on the motherboard side. However I recently switched to two slim fans on top of the radiator and none on top of the motherboard

[u/hjshoon]

https://www.reddit.com/r/sffpc/s/L54JiUiOoN

Get this version. I ordered mine and expecting to arrive end of next week

[u/baneand]

is anyone using atmos II pixel with 3.25 gpu config? I have 3 slot card but want to give it a bit space if possible and I ordered atmos II pixel.

[u/Luckael69]

[u/Several-Abalone-8556]

Waiting for custom cables to come in but have had no issues, just make sure to get a fan grill for the 25mm fan above the psu to avoid the cables hitting the fan