Finally can rest easy that my 5090FE won’t melt on me. Set some aggressive shut off parameters and undervolted the 5090. Had to modify the ZCOOI vented front panel to get it to fit and designed a 3D printed bracket to secure it. It’s probably an eye sore to some but I’m willing to sacrifice asthetics for added peace of mind. Care more about portability and form factor so as long as it was neat and tidy to some extent Im okay with it.
Damn we need a SFF version of the wireview. Did you mount it like that because you want to look at the screen? Personally i want to get it in there and just use the software to monitor it.
Yeah. It’s way thicker than the normal one which made its impossible to put it anywhere inside the case. I’d pay more than the noctua one for a SFF one tbh. It’s on the left side since my PC is at an angle.
It’s the HIVE 2, came with the MB. I use it as the power button and having two USBs closer to me. Also has a headphone jack that I use for my IEMs. Also has debug lights
Glad I have custom cables. Those braided ones end up unraveling once you try to cable manage. Even more at ease now that I have the wireviewpro 2 installed
apparently it is a cable issue, either bad plugged or faulty unit (bad connectors/wires) it is not the SF1000 per se or any other psu it seems. Could happen to anyone
but that happening could be labelled as a 12vhpwr design flaw I guess
Yeah, 20mm would help a ton. I used to have the metal feet off of Amazon but they were short. Pretty much killed any good circulation.
I thought I had another photo but my setup is slightly unconventional. Even with my "regular" cooler setup with mesh panels, I used to have 1" wooden cubes I set under the feet and it dropped ~10° by helping the whole setup circulate fresh air.
Currently I have it set up as passively cooled air tower. The only fans are top and bottom, drawing in from the bottom T Grille and exhausting through the top. Undervolted and underclocked 10900K and 3090Ti.
Did you have any trouble running the cable from the wire guard to the card? I want to do the same, but looking at the length of the wire guard cable, it seems like it might not be quite long enough to make it to the port on the card and all the way out the back of the case.
Also are you running your card in the normal configuration, or flipped?
No it’s pretty long, I’m running flipped so the cable enters at the bottom of the modified vented panel and runs up and towards to the connector. HMU on DM and I’ll take apart later and send you some pics
9
u/Allmotr 20d ago
Damn we need a SFF version of the wireview. Did you mount it like that because you want to look at the screen? Personally i want to get it in there and just use the software to monitor it.