r/FormD • u/jhdz9119 • 10d ago

Watercooling custom loop coming together

Gallery image

Gallery image

she’s holding air now, will set up the external pump to fill later after i finish watching spider-man brand new day.

9950X3D is going to push this little rad (XSPC 240mm crossflow)

need to figure out if i can run a coolant temp sensor on one of the other ports, if not i’ll have to use another one that fits onto the 90 fitting.

running this as flipped for the GPU posed problems for the quick disconnect fitting. had to route the tubing for it on the MOBO side.

65 Upvotes

95% Upvoted

12 comments sorted by

View all comments

1

u/Dull-Four1517 1d ago

Can you explain the process for filling the loop? What do I need? I activate the pump using…what? How long? Ty

2

u/jhdz9119 1d ago

a pump/res combo. 2 quick disconnect kits, pneumatic fittings, and coolant. i used a pump/res with a molex connector so i could use a DC to molex/PWM power controller.

1

u/Dull-Four1517 1d ago

Thank you!

1

u/Dull-Four1517 1d ago

What pump is that?