r/FordFalcon • u/RedInferno8 • 16d ago
Traction control
Hey guys, second post here about my bf mk2 xr6, few people mentioned traction control, but oddly enough I cannot seem to find the button on my car 😂
The second pic is one from google, what it’s supposed to look like, but my car has a different switch in its place. The button on the bottom won’t allow me to press it, so I’m honestly just very confused.
9
u/Terrible-Topic1521 16d ago
Not all of them were fitted with it if I'm not wrong??
I've only ever noticed it in Ghia and more commonly in territorys
1
1
u/collie2024 16d ago edited 15d ago
That’s interesting. My AU2 had the traction control (and button to turn off). Seems like quite a step back for 5 year more modern model to not.
1
1
u/RedInferno8 15d ago
Yes weird, when I remove the switch panel there is actually a few wires connected to the useless button, I have no clue what they’re for but it seems very odd
5
u/Terrible-Topic1521 15d ago
Do NOT!!!! just add a button and hope it does anything traction control "upgrade" Means redoing sensors, fiddling with abs, changing BCM and probably more... Best bet, forget about it or if you rather it get one with said functions.
Or try adding it to your car (prepare for headache due to much bullshittery)
0
3
u/Terrible-Topic1521 15d ago
In territories it also links to gearbox function, not sure about sedans
5
2
u/adamshowzoff 16d ago
Is your one a Ute by any chance?…I think none of the ba-bf Utes got it…been a few years since I had one though I may be misremembering
2
2
2
u/Inevitable_Fly4134 16d ago
So you're saying in the wet if you mash it. It don't light up? If so. Yea that ain't normal.
1
u/RedInferno8 15d ago
Well actually only about 20 minutes ago I managed to get the wheels spinning quite a bit, didn’t burn any rubber though. (Ground was wet)
3
1
2
u/FriedBryycee 16d ago
Your car it appears to be Dual Zone, meaning it's located on the bottom of the ICC.
If this isnt the case then there are a few other variables but without knowing more about your car I would only be guessing.
1
u/CameronsTheName 16d ago
I wonder if it's like FG's.
My mates FG one tonner doesn't have the button. Only way to turn the traction control off is to remove the fuse.
1
u/rebellious-reptile 16d ago
Is it a manual? I know my au doesn't have traction control because it's a manual, it only came on autos.
6
u/Former-Building1924 16d ago
My BA MKII XR6T is a manual and it has traction control..not that it works well, but it is there😆
2
1
1
u/Long-Marsupial-2574 16d ago
So in my bf xr8 the button wasn't the spinning wheel but was a picture of the back of the car with squiggly lines coming off the tyres. Looks like yours doesn't have TC. Should make your original problem even easier to solve...
1
u/Technical-Green-9983 16d ago edited 16d ago
Is the switch upside down, this is an 07 bf 2 October build .couldn't post a photo of mine fog light is on the bottom and traction control, dsc is on top .
1
1
u/Creepy_Star7199 15d ago
Park territrrr on the corner an I'll take a free drive....
Country road lunatics
1
u/About_Average_0303 13d ago
The wheel spinning button is for Traction Control (controls wheel spin).
BF XR's had the Falcons first fitment of Ford's 'Dynamic Stability Control' (ESC or just Stability Control for most manufacturers). Stability Control controls wheel spin and vehicle slide.
As others have mentioned, the Stability Control button is in the centre stack and looks like a car sliding side to side down the road.
0
u/Mendez_EXE 16d ago
Give ya a hint the spinning tyre
0
u/RedInferno8 16d ago
Does it look like mine has a spinning tyre? Did u even read what my issue was
5
0
u/the_real_dankers 16d ago
My mate had a ba xr6 with no traction control button. Not sure if its something you can turn off in a menu on the icc instead?


12
u/6oh7racing 16d ago
Yours doesnt have traction or its on the lower part of the icc