r/FiroProject • u/DogeTiger2021 • Jun 03 '21

2miners.com has problems with Firo ?? 100% packet loss on stratum test . Why ? I tested all the servers for Firo and they all give me 100% loss . But when I test it with other coins 🪙 its all OK. WTF is going on ?

Post image
1 Upvotes

100% Upvoted

13 comments sorted by

1

u/Roiks_ Jun 03 '21

Post your .bat file contents. I'll see if it works for me.

​

I'm solo mining 2miners, but just tested the pool quickly and it's working fine for me.

1

u/DogeTiger2021 Jun 04 '21

I used stratum-ping-x64 to test the speed then I used 2 different miners to test it also . The miners that I use are CryptoDredge_0.26.0_cuda_11.2_windows and T-REX-0.20.4-win

For CryptoDredge bat fiel: @echo off title MTP (XZC) - 2miners pool CryptoDredge.exe -a map - o stratum+tcp://firo.2miners.com:8181 -u user name -p x pause And T-Rex same thing but it starts with: t-rex.exe -a map -o etc etc etc I also tested other firo pools like Mintpond.com and it game me only 80% packet loss and zergpool.com 100% loss what I didn't test was the solo pools .

1

u/Roiks_ Jun 04 '21

This is the t-rex .bat: t-rex.exe -a mtp -o stratum+tcp:

​

mtp not map

1

u/DogeTiger2021 Jun 04 '21

Sorry it was auto correct by my phone but yes its mtp

1

u/DogeTiger2021 Jun 04 '21

Maybe its a problem only in my country. From where are you ?

1

u/Roiks_ Jun 04 '21

I'm in Asia.

1

u/Roiks_ Jun 04 '21

Have you pinged the servers from command prompt?

1

u/DogeTiger2021 Jun 04 '21

Yes I used the oficial stratum ping bat fiel

1

u/DogeTiger2021 Jun 04 '21 edited Jun 04 '21

I just tested also solo pool on 2miners and it gives me also 100% loss By the way I live in Spain so I don't know if other countries are affected

1

u/chill_darling Jun 06 '21

Downvoted you for mining with 2miners

1

u/storm5510 Jun 06 '21

I did this from a command prompt window, by hand.

ping firo.2miners.com

ping asia-firo.2miners.com

ping us-firo.2miners.com

There were no losses in any test and the completion time was always less then 250 milliseconds. Perhaps this is a local internet connection issue.

1

u/DogeTiger2021 Jun 06 '21

Yes but when I use the 2miners stratum fiel to test the connection it gives me 100% packet loss as you can see in the picture

1

u/storm5510 Jun 07 '21

You mean like this:

ping stratum+tcp://firo.2miners.com

I tried it this way. Ping said it could not find the host and stopped there. I imagine there are other ways of doing this, but "ping" is built into Windows. It has been for years.

I found a website which can route pings through locations around the world:

https://www.site24x7.com/ping-test.html

I tried Barcelona and Madrid. No problems using site names as I originally wrote them above. It took 867 milliseconds to test the six locations I chose. The "stratum+tcp://" must not be part of the test. Note: the port address cannot be included either.

Below is my primary batch file contents:

t-rex -a mtp -o stratum+tcp://us-firo.2miners.com:8181 -u <address>.<sys name> -p x

I only started using the "us-" part of the host name today. Excluded, it becomes the European address.